fnwc

I guess my question would be: is there a newer version of the motherboard that perhaps ticks these boxes? I guess they have beta BIOS available now where I don't have to get the custom BIOS directly from ASRock.

Yep can't reflash using these directions: http://www.asrockrack.com/support/faq.asp?id=37 I get the error and it just fails. I had previously reflashed it without issue.

Is the E3C246D4U still the gold standard for Unraid boxes? I'm looking for an 8 SATA port, E2200 compatible board with IPMI. I currently have this board but I recently had a post error 62 which I eventually resolved by resetting the CMOS battery. Unfortunately, now I have a BMC initialization error and can't socflash.exe a new bios due to a "can't find flash chip #1" error, so I think there's something seriously wrong going on.

For anyone reading this, I managed to solve it by pulling the github repo, https://github.com/Taxel/PlexTraktSync, installing Python, and running "python main.py" directly to run the authentication process, which creates the .env and .pytrakt.json files. Then I copied the created .env and .pytrakt.json files to the docker filesystem in the same directory. Actually, I'm not able to access the filesystem without starting the docker, and I can't start the docker in interactive mode (in order to enter my auth information) through the Unraid GUI. So, instead, enter the terminal for your Unraid server, type "docker image ls", find the docker ID of the container, then type "docker run -it <docker_ID>" of the docker ID you found. This will allow you to configure the docker as needed to create the .env and .pytrakt.json files.

Hi, I'm attempting to manually install PlexTraktSync here: https://hub.docker.com/r/twolaw/plextraktsync I have the container set up, but it's missing the credentials (looking at the log I see "Please enter your Plex username: "). I'm currently stuck at this step: I've installed NerdTools to be able to install python 3. However, due to the way the docker is set up in Unraid (I'm guessing), it's not a listed module using something like help("modules"). I'm not really that familiar with docker, but there doesn't appear to be any variables that I can set to set my authorization for either Plex and/or Trakt. Note that I'm a docker/linux novice, so any help would be appreciated.

I successfully downloaded a video, but was unable to move the file out of the destination directory. Perhaps it's a permission issue on the file?

Not sure if this is the issue you're having but it has to do with existing session data at least in the x64 version of Duplicati. When in the web UI, for Chrome, right click "inspect" go to the "Application" and click the "Clear Site Data" button then reload.

Does anyone know why the plugin keeps getting uninstalled for me? I think it's between reboots, but can't be sure. Sometimes it just disappears and I have to reinstall it again...

Does anyone have any idea if there is some kind of HDD mount for 3.5" drives that doesn't mount in a drive bay? I'm using an Antec Twelve Hundred with an mATX motherboard (E3C246D4U), so there is some space where a full ATX motherboard would fit. I need to mount an internal 3.5" but all of my drive slots for the front drive bays are taken by three 5-in-1 drive cages, so there is no more space there. I'm going to put a 3.5" drive for access outside of the array for torrents using a docker, I think using an external USB is probably asking for trouble, so I want to have a direct SATA connection. I need to mount the 3.5" drive somewhere, I don't think it's a good idea to just let it float in the case. Does anyone know if there are drive cages you could mount say, on the server chassis where the full ATX case would extend?

So it seems to be tied to the preclear plugin script. I've had the server running for days now with the memory usage hovering around 22%-25% on 8GB. Once I start a preclear, this causes the machine to have out of memory issues within a few hours.

@Squid Here you go. persephone-diagnostics-20200228-1508.zip

I'm having some issues with my unRAID samba and web UI becoming unresponsive after about 12 hours of uptime. However, I can still login to the machine locally, and I was able to recover the syslog (attached). There seems to be some kind of memory issue, but I can't seem to figure out what's the offending process. Can anyone take a look? syslog

So I ended up completely reseating my memory and CPU (and reapplied thermal paste) -- everything looks good so far.

Hi, My unraid (v6.7.2) server, which has been running well until the other day, it completely stopped responding. I attempted to reboot it and it would sometimes get stuck on the "loading bzroot" stage. Other times it would seeming throw an exception. I have no idea what the green blocks on the monitor are: I've tried a couple of things: Ran memtest, passed Copied a known backup flash copy from a month ago that I know works (v6.7.2) I'm using an old MobileLite G2, I replaced the card with a new Sandisk Extreme PLUS 32GB SDHC Replaced the MobileLite with a Sandisk Cruzer Glide 32GB Tried downloading and 6.8.2 clean format, copying my config from my known "good" copy Tried downloading and 6.8.2 clean format, copying my config from my known "good" copy, only selective files/folders: Sometimes it will actually boot to the login screen, but it soon throws some kind of exception. Since the entire OS becomes unresponsive, how would I track down the log of this? I need to get a diagnostic, but IIRC unraid stores logs in memory, which doesn't help me here. Next I might just try a completely fresh 6.8.2 install, but I don't want to have to recreate all of my settings from scratch... (Edit: just did this and it still faulted out -- seemingly there is a hardware error somewhere, but how can I figure out what's wrong)? Any thoughts?

Thanks!