-
Posts
252 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by nia
-
[Support] Linuxserver.io - Unifi-Controller
nia replied to linuxserver.io's topic in Docker Containers
I have an AP-LR and I'm on 7.2.95 with no issues. The AP-LR won't update anymoe, but you can IMO safely upgrade the rest of your equipment. I have for many many versions with no issue. There is a few things you can't do as long as you have the old AP, like e.g. assign devices to a specific AP, but otherwise you are fine. No reason to downgrade at all. -
I just moved my array of 16 disks from using reverse breakout cables directly to disks over to a 24 bay InterTech server cabinet https://www.inter-tech.de/productdetails-142/4U-4424_EN.html with a SAS backplane for each row, and connection to four rows with 8087 SAS cables to the backplane from my two IBM M1015 flashed to LSI9211-8i IT mode (running on an Asus X99-WS/IPMI). Migration was completely transparent, unRAID automatically found all the drives, and booted as if nothing had happened, except the disks didn't spin down. I quickly found this plugin, installed it, and voilรก - spin down working flawlessly! So this post just to confirm my configuration is working with the plugin, and first and foremost a big thank you for building and maintaining this @doron ๐๐
-
[Support] Linuxserver.io - Unifi-Controller
nia replied to linuxserver.io's topic in Docker Containers
Just remember to do the final updates to the UAP's before you go too far down the upgrade road (if you have not done so already) -
[Support] Linuxserver.io - Unifi-Controller
nia replied to linuxserver.io's topic in Docker Containers
Soon-ish, but so far no issues at all (that I have noticed) -
[Support] Linuxserver.io - Unifi-Controller
nia replied to linuxserver.io's topic in Docker Containers
I was sitting fine on 5.10.14 for a looong time๐ด, but now wanted to upgrade, due to a U6 LR AP I finally will mount, the log4j-bug and also I have to install a new site at some friends house, and they will have a version 6 controller (on a RPi), so I have to look a little ahead into version 6 ๐ง. Anyway - earlier in the thread, positive confirmations was sought for, so just for reference for anyone else coming from old v5.x-versions, I successfully upgraded in two steps. The path I took was: 5.10.14 --> 5.14.23-ls76 --> 6.5.55. No issues whatsoever. ๐ Also, I will just mention, that my old EOL'ed UAPv2 (used for improved outdoor coverage) still works - I updated to the last ever firmware for it just before upgrading the controller. It works as before, just has a little yellow warning sign next to it indicating that its EOL. Next step will be to install the U6 LR, that I have had laying for far too long ๐ For reference, my UniFi equip list: USG, US-8-150W, US-8-60W, US8, 2*UAP-AC-LR, UAPv2. -
Reporting 2.27TB be moved from a 2TB drive with 162GB free??? I have one ReiserFS disk left in my system, that I would like to empty and convert to XFS. However, after planning, the Plan says it will move 2.27TB from a 2TB drive with only 1.84TB data. Also - in the GUI it suggests 2.27TB, in the log 2.11TB Does this mean, that some files on that disk are corrupt in some way (I would assume yes)? Any suggestions for how to proceed? Thanks in advance for input.
-
I made a very similar mistake - or at least ended up with the same issue๐ However - the procedure above with btrfs-select-super -s 1 /dev/sdX1 and btrfs-select-super -s 1 /dev/sdY1 saved me ๐ Thank you so much @Robb3rt for posting here ๐๐ค
-
I have a similar issue - any solution yet?
-
Unraid 14th Birthday Case Badge Giveaway
nia replied to SpencerJ's topic in Unraid Blog and Uncast Show Discussion
Regarding anniversaries: Later this year I will have the big 10 year anniversary with unRAID ๐. Through all these years, unRAID has always had my back. Just now, I'm in the process of finally leaving my old setup with unRAID running in a vSphere VM alongside other Windows VM's, and in stead let unRAID be the host. I think it will be better that way ๐ It would for that reason be ever the more appropriate with a sticker for my server ๐ Anyway - keep up the excellent work guys - Happy Birthday! /Niels -
Download starts but stops as nothing gets written to disk Hi. Feels like I'm so close - but yet so far away I have the app running, VPN works, I can see it on CheckMyTorrent both with VPN turned on and off When I start, I get connections to many peers, but they soon die out - I assume because nothing gets written After each recent attempt to change the configuration, I have tried to add a fresh torrent to ensure nothing old was in play To me it looked a lot like a permission issue, so I have tried moving the download location multiple times - even creating a special folder for it. All for locations with permissions "Public". Still no result. Log and config attached. What to do next? Thanks for any input - I'm sure it's a simple thing... log.txt core.conf
-
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
For me, the issue disappeared - I think with 6.1.7 - maybe earlier . I can at least confirm that 6.1.7 does not have the issue here. -
Just wanted to say [glow=red,2,300]THANK YOU![/glow] for this docker I have had a full ESXi Virtual Windows installation reserved only for uTorrent and the VPN client plus virus/malware scanners etc. - a quite heavy setup, sluggish and a lot of waiting time every time it was started. This one is Soooooo much easier, lighter and so far appears to just work. Brilliant stuff. Quick question: Is this guaranteed to only be active through the VPN - i.e. if the VPN connection drops or signon fails, then nothing is sent/received?
-
Yes - I removed and reinstalled, and all is good now. Just had to redo configuration of what to backup. Thanks.
-
Any suggestions how I get it running properly again? More documentation needed?
-
Black screen in the UI. Hi. I played around with an early version of the docker - left it for some months, and now I have installed the newest version. I got it working fine first time. Then after a day or two, my server got completely unresponsive. I can't say it's this Dockers fault, but the server is normally otherwise stable. Now - after a hard reset, parity check and a few restarts, I'm trying to get the docker started again. I can start it, but when I go to the WebUI, either directly from the docker icon or from a VNC-client, there is just a black box and a mouse cursor. How do I get the UI back? Log attached. Clipboard_Text.txt
-
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
@JimPhreak: No - sorry for being incorrect in stating "passthrough of the port" rather than "adding" - my mistake. @smdion: As my Supermicro board only has the one controller (as I understand/remember it), I would have nowhere to boot ESXi from if I passed the controller through, leaving me with no USB ports left... So I will have to wait for the issue to be hopefully solved soon. At least things appear to work regardless of the logging. -
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
Not sure what you need apart from the previous screenshot. Tell me a bit more in detail how to find what you need, and I'll be happy to help! -
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
Oh yes - look down to #81 in this topic -
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
-
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
I used to do that as well, but just upgraded both ESXi (from 5.5) and unRAID(from 5.0.4), and while I was at it thought I would just test the improved plop: PlopKexec. It is MUCH faster at booting! I just timed it (see my config in signature): Power on until finished reading kernel and starting "running text": 30 secs Power on until login prompt: 1 minute flat! So now I just boot using the plopKexec ISO never looking back again to the vmdk-method. -
ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci
nia replied to dmc72's topic in Virtualizing Unraid
I have just upgraded, and unfortunately I also get these warnings Jul 19 17:16:14 Tower kernel: usb 1-1: reset high-speed USB device number 2 using ehci-pci Jul 19 17:16:14 Tower kernel: sd 4:0:0:0: [sdn] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB) Jul 19 17:16:59 Tower kernel: usb 1-1: reset high-speed USB device number 2 using ehci-pci Jul 19 17:16:59 Tower kernel: sd 4:0:0:0: [sdn] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB) Jul 19 17:17:40 Tower kernel: usb 1-1: reset high-speed USB device number 2 using ehci-pci Jul 19 17:17:40 Tower kernel: sd 4:0:0:0: [sdn] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB) My USB key is a Kingston DataTraveler 2.0 2GB -
LSI Controller FW updates IR/IT modes
nia replied to madburg's topic in Storage Devices and Controllers
I realise now, that I missed this step when I flashed my first card: 6. Program SAS address in IT-mode: sas2flsh -o -sasadd 500605bxxxxxxxxx where "500605bxxxxxxxxx" SAS address from small green sticker on yor card, without "-" Despite me missing this, it is humming away nicely in my now converted production box on 5.0.12a. BUT - I now have a second card, that I 'm intending to integrate. I did the reflash including step 5 on the only machine I have been able to. Then I figured I would reboot to do step 6 - also to read the sticker for the number. Unfortunately, that machine now can not boot, as it is hanging at the BIOS of the adapter. So I have no option at my disposal to do step 6 on any of the cards. Will I have any issues in an unRAID scenario by having two cards that has both not been through step 6 to get individual addresses? -
MicroServer N36L/N40L/N54L - 6 Drive Edition
nia replied to neilt0's topic in Unraid Compulsive Design
You mean apart from "This promotion is only available to end user customers based in the UK" ? D'OH! Note to self: Don't try to read small print on excitingly good offers at 2:30 AM... -
MicroServer N36L/N40L/N54L - 6 Drive Edition
nia replied to neilt0's topic in Unraid Compulsive Design
But I see nowhere in the terms that this is UK only. And with EU regulations and all, I should be able to buy one to Denmark. I regularly buy other stuff from the UK (even 17" tires!!!), so it should be absolutely possible... Hmmm.. better finish my build first. But ยฃ150 - that's just too cheap to pass on -
LSI Controller FW updates IR/IT modes
nia replied to madburg's topic in Storage Devices and Controllers
Sorry, but no idea what exact card you are referring to. If you can post that info it would be helpful. Thanks. Sorry - I realised the actual card model is only mentioned in my Pleiades build not in my reflash post above Card to be flashed: IBM M1015 Method: DOS boot disk. P11 firmware. Zerons batch file. Successful on: HP Workstation XW9300 - chipset nForce Professional PAL error on: Supermicro X9SCM-F AsRock P45R2000 Not recognised on (did not do a huge investigation here, maybe it can be under certain conditions): A8N-SLI Premium