thedinz

Not sure whats happening but i cannot access the webui, i use both your radarr and sonarr and the radarr ui loads fine, the sonarr doesnt, no error either. Not much in the logs (see below) i keep comparing config against radarr is its fine, and it wasn't always like this. not sure when it stopped working properly or why as its mostly, set it and forget it..... Its. not showing up any updates so its up to date using this branch (which was default when in installed i did not change this) binhex/arch-sonarr 2023-05-14 21:15:40.733583 [info] Host is running unRAID 2023-05-14 21:15:40.757954 [info] System information Linux 507c8e17d483 5.19.17-Unraid #2 SMP PREEMPT_DYNAMIC Wed Nov 2 11:54:15 PDT 2022 x86_64 GNU/Linux 2023-05-14 21:15:40.788074 [info] OS_ARCH defined as 'x86-64' 2023-05-14 21:15:40.819493 [info] PUID defined as '99' 2023-05-14 21:15:40.856683 [info] PGID defined as '100' 2023-05-14 21:15:40.908443 [info] UMASK defined as '000' 2023-05-14 21:15:40.938197 [info] Permissions already set for '/config' 2023-05-14 21:15:40.972670 [info] Deleting files in /tmp (non recursive)... 2023-05-14 21:15:41.016457 [info] Starting Supervisor... 2023-05-14 21:15:41,302 INFO Included extra file "/etc/supervisor/conf.d/sonarr.conf" during parsing 2023-05-14 21:15:41,303 INFO Set uid to user 0 succeeded 2023-05-14 21:15:41,306 INFO supervisord started with pid 7 2023-05-14 21:15:42,310 INFO spawned: 'sonarr' with pid 58 2023-05-14 21:15:42,310 INFO reaped unknown pid 8 (exit status 0) 2023-05-14 21:15:43,065 DEBG 'sonarr' stdout output: [Info] Bootstrap: Starting Sonarr - /usr/lib/sonarr/bin/Sonarr.exe - Version 3.0.10.1567 2023-05-14 21:15:43,426 DEBG 'sonarr' stdout output: [Info] AppFolderInfo: Data directory is being overridden to [/config] 2023-05-14 21:15:43,426 INFO success: sonarr entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2023-05-14 21:15:43,541 DEBG 'sonarr' stdout output: [Info] Router: Application mode: Interactive 2023-05-14 21:15:43,719 DEBG 'sonarr' stdout output: [Info] MigrationLogger: *** Checking database for required migrations data source=/config/sonarr.db;cache size=-10000;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 *** 2023-05-14 21:15:43,872 DEBG 'sonarr' stdout output: [Info] MigrationLogger: *** Checking database for required migrations data source=/config/logs.db;cache size=-10000;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 *** 2023-05-14 21:15:44,092 DEBG 'sonarr' stdout output: [Info] OwinHostController: Listening on the following URLs: 2023-05-14 21:15:44,093 DEBG 'sonarr' stdout output: [Info] OwinHostController: http://*:8989/sonarr/ 2023-05-14 21:15:44,093 DEBG 'sonarr' stdout output: [Info] OwinHostController: http://*:8989/ 2023-05-14 21:15:44,582 DEBG 'sonarr' stdout output: [Info] SonarrBootstrapper: Starting Web Server The only thing i can see is both radarr and sonarr are configured int he config.xml to bing ip * but only sonarr has that output of [Info] OwinHostController: http://*:8989/

Yes I did reverse proxy it so it's fair to say that's my issue, i ran the command anyway and the proxy URL isn't there. It looks like my flash backup is current and that's all I really care about currently. Thank you!

As the title says, updated to the latest version which is 2022.09.06.2108 and i now have this error. Please advice, thanks kindly.

Make sense i shall implement it and see what happens.

Sorry for the dumb question but how can i set it up so it saves more then one version of the backup? Right now it only makes 1 copy and if that copy also contains whatever issues im facing then it is useless.

Does anyone know if this would be fixed in later versions or is disabling this the proper thing to do, seems like a band-aid. Im asking because i don't think its ready for me to upgrade, just too many various issues all over here and reddit. Are the devs making a list of these issues to address or are we suppose to dive in, update and fix whatever arise's as we find it? Sorry this is not meant to be condescending i just don't know how long i should wait it out or if now is as good as it gets.

So yesterday i set up system temp that looks good it is reporting correctly. Then i tried to setup autofan control and when i click detect on PWM fan (i have 3 options in the drop down they all yield the same results) i get this. <br /><b>Warning</b>: file_get_contents(/sys/devices/virtual/hwmon/hwmon1/pwm1_enable): failed to open stream: No such file or directory in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>40</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/virtual/hwmon/hwmon1/pwm1_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>42</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/virtual/hwmon/hwmon1/pwm1_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>50</b><br />/sys/devices/virtual/hwmon/hwmon1/fan1_input I dont know how to fix that but ever since setting up temp and trying to setup autofan control one of my fans has been going at over 5000 RPM, its never done this before, i tried a reboot to see if it level off but it did not and i do not want it to continue to run like this. Cross-posted on reddit in case you see it there.

So since my flash is backed up to Unraid using "my servers" the Appdata Backup/Restore should be all i need? Of coarse if i want to backup my media that's different, thinking about dulicacy for that.

Hello, coming from windows having my plex, radarr, sonarr etc running on windows i would just make images (incremental) of the system so in case of disaster i could restore the machine as it was (excluding the media itself) How can i achieve this with UNRAID? If there was a disaster how could i restore my server to how it was quickly? Right now i am backing up the flash drive with "My Servers" plugin. I also see Appdata Backup/Restore v2 come up a lot. So is this the plugin i should use to backup all my configs, shares, settings, paths as well as my docker images and settings? I hope i am making sense but i think you probably understand what i am trying to achieve, just looking to find out how to do it.

The new router did it! I am good to go now!

Yup that was it, i went to the main index and clicked on replace single drive part of a cached pool

Welp, its says currently broken on my version so not sure what next lol

I see, so this will come up sooner rather then later though, what WOULD the process be then to unload data from an old drive to a new drive, assuming i cannot add the other one to the machine due to no more space, i do have one of those USB-sata adapters that i have used in the past but that was on windows.

I was thinking about just replace one for the other, but i could also keep both for sure, how would this go? How do i add the second drive as a cache and then...... how to i set what goes where?

Very new still and learning as much as i can, i am still even on an UNraid trial but at this point i am locked in. That being said at the time of setup i did not have a parity drive, I am adding that today, what does that process look like? I had help setting all this up but its time to start doing on my own. After i physically put the drive in the server and boot up what are my next steps? Informational: Can someone explain how parity works because i still do not get it, i have 4 drives total, 3 of them are each 4TB and 1 is 10TB so my new parity drive is a 10TB as it needs to be as large as my largest or bigger. How does this one drive cover failures on all 4? My brain cant wrap around this. When upgrading drives (lets say i am going to replace a 4TB with a 10TB) i was told i would use the parity drive to offload a 4TB drive, remove, add bigger drive and then reload from parity. How does this process work? It must be manual no? How could i otherwise garuntee the data from the drive i am removing is on the parity? Sorry for these juvenile questions. Cache drive: at the time of setup i also only had a 256GB NVME drive, its still only 50% full but regardless i will adding a 1TB NVME SSD later today along with the new parity drive. I will leave the current cache drive in place, and add this as well, how do i move everything from the old drive to this drive and make it my cache drive? I think that is all for now, thanks kindly for the time.

Thank you for all the help on this, the reboot did not do it but i do however still think issue is with my router. There is a good news though, it was enough to get me to stop paying my ISP to rent this basic router from them and to get my own more professional grade router so once that comes in and i set it up i will report back and let you know if that solves the issue.

It appeared to work

PING www.REMOVED.unraid.net (REMOVED) 56(84) bytes of data. 64 bytes from pool-REMOVED.fios.verizon.net (REMOVED): icmp_seq=1 ttl=64 time=0.657 ms ^C --- www.REMOVED.unraid.net ping statistics --- 7 packets transmitted, 7 received, 0% packet loss, time 6008ms rtt min/avg/max/mdev = 0.384/0.444/0.657/0.093 ms

Correct i replaced it with the actual host but the command failed

I feel like i am quickly becoming a pain in the ass but that command responds with host command not found

Here you are Unraid OS 6.9.2 Signed in to Unraid.net as thedinz Use SSL is auto Local Access url: https://REMOVED.unraid.net:3443 Remote Access url: https://www.REMOVED.unraid.net:13856 Request: { "keyfile": "XhyMe...", "plgversion": "2021.10.12.1921", "internalip": "192.168.1.215", "internalhostname": "REMOVED.unraid.net", "internalport": "3443", "internalprotocol": "https", "remoteaccess": "yes", "servercomment": "Media server", "servername": "Cloud", "externalhostname": "REMOVED.unraid.net", "externalport": "13856", "externalprotocol": "https" } Response (HTTP 200): [] success

Yes indeed i posted screenshots in my first post, but maybe i somehow goofed? IF your able to take a quick look maybe you will spot my mistake but i really do not think so.

Yes sir those are the instructions. 1 - It says its unreachable from outside my network. https://tinyurl.com/yykz88u5 you will see in the screenshot the info it wants me to setup is exaclty what i have setup according to my previous screenhosts. 2 - ran it, but it didnt help in my unraid under the drop down it says response not successful, receive status code 500, actually scratch that, it did help it made it so it says online in my dahsboard now https://tinyurl.com/y4oszln4 however clicking on remote access still gives me "this page cannot be accessed" 3 - it says remote access which only adds to my confusion

I am not sure where to go from here and i know its still in beta and i also know you get alot of these posts so i hate to pile on but its frustrating when i followed the steps to the letter and i know its setup correctly. I have port 13856 as suggested forwarding to 3443 again as suggested. Doing this did change the wording from local to remote in my servers but it still says offline and the hostname URL only works locally not remotely. https://tinyurl.com/y6hu64ah https://tinyurl.com/yxw6w9bx So in UNraid i set https to 3443 and wan to 13856 Using 6.9 so TLS is set to auto. What am i missing?