Visuals

it looks like im facing a similar problem like Caennanu when i try to access Vaultwarden localy i get a infinite loading screen and nothing else. when i connect via proxy manager i get the same loading screen aswell. any idea what i could do to fix this issue? i already restarted the docker several times. in the logs i cant see anything strange. Any help or hint would be appriciated.

Sorry for the long delay. What do you mean with "just use its output"? î have no phisical access to the server etc. what i could probably do is to create it with no video card, access it with VNC, then install rdp, switch to setup with graphic card, and then use RDP to connect. would this be working?

Thanks for your tips. Its strange, because when i created a new Linux based system i can see bot, VNC and also RDP, when i deleted the Windows 10 VM and created a new one from scratch, i still only see RDP?! As soon as i choose my Graphics Card in the configuration, the VNC option disapears. When i leave Graphics Card on Virtual, then i see the VNC option, otherwise not.

For me it looks like this if i try to connect to the VM: Then i get this error message:

sorry for the noob question, but how do i install it if i cant access the VM? i need a little more guidance.

do i have to install this on my local machine or on the VM? how do i use this tool?

Hey guys i tried to install my first VM on unraid. it looks like the VM was started sucessfully, but when i try to connect to the Machine i get the following error: i searched the forum but didnt found the solution that i was looking for so far. could someone give me a hint what i'm missing? Thanks a lot for your help and patience.

Hey guys, im still getting this message even i applied the script from the first site. Am i doing somethig wrong from my side?

how can i do that?

i'm at the same point at this moment. trurl said that it is doing a "clean install" at every boot. What i want to achieve is that i wanna start over with the whoe thing like when i started up unraid the very first time. i want all my configs, all my dockers, scripts and everything gone and start from scratch. Can i achieve that by just plugging in the USB with unraid to a new System or what would be the way to achieve that? Thanks a lot for your help.

Also wenn ich das richtig verstanden habe, dann kann ich einfach mein altes Maiboard ausbauen und ein neues Mainboard einbauen, die Harddisks entsprechend einfach wieder anhängen und es sollte alles laufen. Ich würde mein aktuelles System mit einem älteren AMD Epyc Prozessor tauschen. Wie war der Tipp von @DataCollector genau gemint von wegen: "Schreib Dir die Postitionen/Seriennummern der Platten auf. Falls unrai die Reihenfolge nicht wieder richtig hin bekommt, kannst Du das Array dann wieder manuell anlegen." Was muss ich hier genau aufschrieben? Sorry der Server läuft seit längerer Zeit problemlos und habe schon seit langer Zeit nichts mehr daran gemacht. bin daher ein bisschen aus der Übung.

Thanks a lot @bmartino1 for your advise i have checked the Cache drive and found some uncorrectable errors, the question is what this means. Is there a hardware error and should i replace the drive? root@THOR:~# btrfs scrub status /mnt/cache UUID: f9420902-2775-4d15-ab3d-be3218c586c8 Scrub started: Thu Dec 5 07:55:36 2024 Status: finished Duration: 0:00:29 Total to scrub: 323.66GiB Rate: 2.55GiB/s Error summary: super=3 verify=2 Corrected: 0 Uncorrectable: 2 Unverified: 0 The Smart test was sucessfull and didnt found any errors. i now repaird the filesystem, how can i check if this was sucessfull? (Sorry, im a noob in this area)

Any hint what i could try? i uninstalled and reinstalled Deluge to see if this helps, but no success.

Here are the diag data. thor-diagnostics-20241126-0754.zip

Hey guys Hopefully someone can give me a hint what going wring on my system at the moment. Some of my Docker containers are not reachable anymore when i try to open the Web-GUI. i get the message that the site is not accessable. The website is not accessible 192.168.0.22 has rejected the connection. Try the following: Check connection Check proxy and firewall ERR_CONNECTION_REFUSED I have this issue only with some of the Dockers. Here are some examples: Plex: https://192.168.0.22:32400/ Deluge http://192.168.0.22:8112/ Linkwarden http://192.168.0.22:3000/ Radarr http://192.168.0.22:7878/ I already swapped the ports of the different Dockers and also deactivated the Anti-Virus and Firewall. Thanks for your advise. Cheers Visuals

this worked so far thanks a lot. To bring the diabled drives online i habe to switch them to "no disk" and then add the disk again that a parity rubuild is getting started, right? is there a easier way to do that?

thanks a lot for your swift reply. i tried to run the command without -n on drive 7 and i got this as a result: Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... Log inconsistent (didn't find previous header) failed to find log head zero_log: cannot find log head/tail (xlog_find_tail=5) ERROR: The log head and/or tail cannot be discovered. Attempt to mount the filesystem to replay the log or use the -L option to destroy the log and attempt a repair.

Hey guys, im currewntly struggling with a problem that i dont know how to fix it. i had the problem that i most probaly had not enough power delivered to all the drives, therefore drive 14 went offline. i fixed now the power delivery problem but when i reboot i see two drives with Unmountable: Wrong or no file System and one drive wich is additionally offline. because i only have two parity disks trhis would meand that i have data loss right? i attached the diagnostics in here. hopefully someone can help me guide a bit to see how i can fix it. Thanks a lot for your hel. thor-diagnostics-20231020-1347.zip

Currently i'm running the following cunfiguration: Intertech IPC 4U-4420 Case AMD Ryzen 5 5600G 10x Sata drive 1x NVME be quiet! System Power 9 (500 W) When i add one more drive, then i suddenly get issues with my drives, they disconnect and are giving read errors etc. i suspect that my PSU is not strong enough to handle all of it. My Case can fit 22 HDD's and 2 NVME and i plan to fill them one after another. In this case i have 5 Molex connectors, each of them powers 4 drives. Do you have any suggestions about a power supply that can handle all this stuff? Thanks a lot for you help

Hey guys i have some issues witrh my ironwolf pro drives and unraid. in my old raid setup, both disks where runnig like a charm and i didnt had any issues so far. since i switched them to unriad, i get strange error messages and somehow they don't seem to work properly. one of the disks was already replaced by a new one, but the porblem stays the same. When i go to the SMART Section of those two disks, they are "empty" even if i run a manual test. but due to unriad they support raid features. does anyone know if there is ageneral issue with this disks or if i'm doing something wrong? thanks a lot for your help thor-diagnostics-20220410-1445.zip

ohh noooo.... what a rookie mistake, i got it all wrong. sorry for that. are there any shares that i shoul leave on prefer or anything else than "yes"?

Hey guys i have the problem that my mover is not working correctly, and i cant find out why this happens. i have already tried a lot of solutions from others that had the same issues, but somehow nothing seems to work for my situation. My cache is filled up with data and it seems that he is not moving them to the other disks as it should. i tried to switch all shared to "Prefer: Cache" but not even this seems to do anything. i attached my diagnosis file and also a screenshot of the shares. i hope i can get some help from you guys because i'm pretty new to unriad. Cheers Visuals diagnostics-20220325-0922.zip