hackztor

Also learn to just wait a few months. After a few point releases then it seems more stable. Gives time for the plugins to get updated or for other authors to start their own duplicates of plugins because other developers stop updating them.

I had this happen to one drive as well. Ended up replacing the drive as it would happen every time.

Thanks that worked.

6.4.1 RC1 works, RC2 does not. Below is what it looks like in rc2 and final.

I was on 6.4.0 using Libre and my card was detected. Upgraded straight to 6.4.1 Libre (did not update to stock 6.4.1 first) and my card was not detected. Went back to 6.4.0 Libre and it is detected again. HAUPPAUGE WinTV-quadHD PCI Express TV Tuner Card 1609 . On 6.4.1 it shows up not detected. Should I make sure to update to the stock 6.4.1 first then the Libre?

just go through community applications (plugin). A lot easier.

I used the docker a few months ago and it was working no problem. Then I redid it this week and issues. Out of about 100 restarts of it only one time did it actually get to the web interface. I get failed to bind to port 80 in the logs. I am pretty sure you have to run it as host. Also, privledged is required.

Can we get a response on if any TV tuner can be passed through to a docker such as Plex for Live TV. If not I want to return the adapater.

With one of the dvb custom kernel or with stock unraid? Screenshot

So does that mean when it shows up as an LG that will never work? I am thinking im just gonan return the dapter and get homerun extend. According to this the kernel has drivers. https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-quadHD_(ATSC_ClearQAM)

When I use stock unraid it detects the card as Conexant. I tried the dvb edition and it detects it as LG Electronics LGDT3306A . Im hoping this will work. I know the newer model of this card (the one I have) will not be able to be used in plex till next media server version. Looks like it is passing it through correclt as the plex log says Ignoring (LG Electronics LGDT3306A VSB/QAM Frontend) as it is not supported device.

How would one pass through a PCIE tv tuner to a docker (Plex). Is this even possible?

I was just testing this docker in unraid 6.2.4 and this command was working. docker exec -it Rclone SYNC_COMMAND="rclone sync --dry-run /data remote:/Test" Now when I try it with unraid 6.3 it says rpc error: code= 2 desc=containerd: container not started. Any ideas?

Well, yeah. Crypt is a feature of rclone. It has nothing to do with docker. All docker does is package the program in a container. The docker version might use an older version of rclone before the crypt feature was added, if that's what you are asking. The only real difference between the docker and the plugin versions of rclone, as far as usage goes, is that because of the way docker works you cannot share a mount with another docker. So for instance, if you are planning on using a rclone docker encrypted mount with Plex, you will need the rclone plugin. Cool thanks. That plex example is what I was looking at. I just using it to backup so I can stick with the docker. Thanks.

Does can the docker version encrypt files with the builtin crypt of rclone or do we have to use the plugin if we want to encrypt?

Anyone has the ability to issue pull requests on this file: https://github.com/Squidly271/Community-Applications-Moderators/blob/master/Moderation.json for my review. Or to drop me a PM about any non-functioning container. My limited understanding about GMM was that it does function, albeit if IPs / Users change then it goes downhill The program functions correctly but each new restart of the docker causes a random mac address which takes up a license. Quickly reaches your limit with Google.

I have for x64. https://onedrive.live.com/redir?resid=A5472024FE99555A!34549&authkey=!AETSUcItjjQpu4I&ithint=file%2c

Parity check going nice with SAS2LP. 6.1.3 60 MB/s 6.1.4 110 MB/s

XFS ftw. Went to that and never any more problems. With Reiserfs would get corrupt filesystem once in while.

Snapraid is more flexible and u can go from unraid to snapraid but not the other way around. Unraid, a single empty drive would have to be added and data moved onto it. You have to start with clean empty drives.

70-80 MBps parity check. 22 hours. 01:00.0 RAID bus controller: Marvell Technology Group Ltd. 88SE9485 SAS/SATA 6Gb/s controller (rev c3) Subsystem: Marvell Technology Group Ltd. Device 9480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0440000 (64-bit, non-prefetchable) Region 2: Memory at f0400000 (64-bit, non-prefetchable) Expansion ROM at f0460000 [disabled] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: mvsas Kernel modules: mvsas

Ill stick with needo until plex pass is added to official. Will be nice to have an official one though.

They said it just shows direct play but still transcodes so it is more of an annoyance. If you switch to the Needo/plex docker image you could add a VERSION variable and set it to 0.9.12.3

Phaze did it well with his plugin. Defaults to non plex pass, had variable space for username and password of the user for plex pass. Want to go beyond, you throw a version so people can use older versions for troubleshooting/fixing new bugs. Yeah, I don't see that happening ;-) We need to do more digging on this to see what the best approach would be for Plex. Maybe I need to drop a note to the Plex team to get their feedback.

You are brave to try btrfs with your data. I use it only on cache and use xfs on the data ones. Btrfs still not as mature although the checksum and snapshots is fun.