bozzio

Okay I removed the ram limit on NPM. I'm not sure why it was there to begin with. The error is still there when I scan fix common problems. Do I need to acknowledge it and then scan again? Or should it clear up all by itself? What do you mean? I don't even know what segfaults are.

Hello I just recently received this message from fix common problems. I have 128g of ram and on the dashboard screen it never goes over 40% usage. I'll attach my diagnostics hopefully someone can help me understand what's wrong. Thank you zeus-diagnostics-20250921-0751.zip

Can we enable the use of Tailscale (via unraid 7) with the Technitium container?

When I install your adguard-unbound container, it works well unless I try and install on br0 network. Then the container seems to have no internet access, ie: can't ping google.com. /opt/adguardhome/work # ping google.com ping: bad address 'google.com' Everything works fine on custom docker network but I would like it to have its own IP. I have pihole unbound currently running on br0 with no issues but I can't figure out whats wrong in this case.

No I have to unplug and plug back in every time.. The cable is only like 4 months old and it's cat 6 from ubiquiti. If it drops again with no nut plugged in I will try a new cable. It's weird though I've had nut plug-in for like 6 months and never had an issue.. just started in the last couple of weeks. But it's been about 13 hours since I unplugged the ups and been okay so far. Will keep monitoring

So I get no more errors in my system log but I just lost connection again, but I was using unraid's built in ups monitor. Now Ive completed disconnected it and will monitor again. This was in syslog: Nov 25 19:27:19 zeus kernel: igc 0000:07:00.0 eth0: NIC Link is Down Nov 25 19:27:20 zeus kernel: bond0: (slave eth0): link status definitely down, disabling slave Nov 25 19:27:20 zeus kernel: device eth0 left promiscuous mode Nov 25 19:27:20 zeus kernel: bond0: now running without any active interface! Nov 25 19:27:20 zeus kernel: br0: port 1(bond0) entered disabled state Nov 25 19:27:33 zeus kernel: igc 0000:07:00.0 eth0: NIC Link is Up 2500 Mbps Full Duplex, Flow Control: RX Nov 25 19:27:33 zeus kernel: bond0: (slave eth0): link status definitely up, 2500 Mbps full duplex Nov 25 19:27:33 zeus kernel: bond0: (slave eth0): making interface the new active one Nov 25 19:27:33 zeus kernel: device eth0 entered promiscuous mode Nov 25 19:27:33 zeus kernel: bond0: active interface up! Nov 25 19:27:33 zeus kernel: br0: port 1(bond0) entered blocking state Nov 25 19:27:33 zeus kernel: br0: port 1(bond0) entered forwarding state Just says its down and doesn't say why.

Thank you. Will definitely do that next time it drops and report back. It's a shame there's no fix for the ups.

Hello For the last week or at random interval's my unraid server loses all connectivity. I can no longer ssh into it or reach the web ui. All dockers are no longer reachable on the network. I see server on my UDM-PRO as connected and available. It takes a reboot to fix the issue temporarily but then it randomly drops again, sometimes a day sometimes 2 days. I'm terrible with network stuff and would love some help. Here are diagnostics I took this morning right before reboot. I don't know exactly what time but it was between 02:00 and 07:00. zeus-diagnostics-20241125-0711.zip

I'm getting this error randomly and can't figure out what's wrong. ``` zeus usbhid-ups[1012]: nut_libusb_get_string: Pipe error ``` nut-debug-20241124205841.zip

I try and run that command, and it seems to go through but then i immediately run a ssh ****@*****.rsync.net ls and I get : ssh: connect to host *******.rsync.net port 22: Network is unreachable Then after a short time I'm able to send commands again but I still get: hostfile_replace_entries: link /root/.ssh/known_hosts to /root/.ssh/known_hosts.old: Operation not permitted update_known_hosts: hostfile_replace_entries failed for /root/.ssh/known_hosts: Operation not permitted Now everything does seem to work but those errors persist. I've done the same thing to the same server from my windows machine without issue. But this remains on my unraid server.

Ah thanks man. It was xfs which I thought would be okay. But formatted to btrfs and it worked. Thanks so much!

I'm trying to backup to a external ssd and I get the message saying hardlinks are not supported. How would I fix that? The script works when backing up to my array just not to the portable ssd. Thanks

Thank you for the quick reply.. I actually figured it out. Jellyfin container was throwing some gpu transcoding errors for some reason even though it wasn't being used, and I restarted the container and the parity check speed shot right back up to 160MB/s.

Hello. I started my parity check last night and it started around 105-115 MB/s on a 16TB parity drive. This morning when I checked it's down to 25MB/s and I'm not sure why. I'll attach a diagnostics taken during the slow period of parity check. If anyone could help me figure this out I would really appreciate it. Thank you diagnostics-20241102-1114.zip

Any help on this?

Invalid folder error. Please help me fix. Invalid folder ncdata contained within /mnt Generally speaking, most times when other folders get created within /mnt it is a result of an improperly configured application. This error may or may not cause issues for you More Information The folder shows empty and is owned by root. I don't have anything mapped to it.. But I think I tried deleting it before and it broke my nextcloud aio. zeus-diagnostics-20241011-1111.zip

Did you ever find a fix for this? Mine works at http://192.1686.1.101 but not when i try the myunraid.net signed certificate ip.

Hello I'm getting Invalid folder ncdata contained within /mnt and I'm not sure why. I'm running nextcloud aio and i have no variables pointing or mention ncdata. I have NEXTCLOUD_MOUNT pointed to /mnt for the purpose of passing external media. I cannot find what is causing this. I have tried deleting the folder but it crashed nextcloud. Any help would be great! diagnostics-20240726-1631.zip