bonienl
-
Posts
10233 -
Joined
-
Last visited
-
Days Won
65
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Report Comments posted by bonienl
-
-
5 minutes ago, Squid said:
Yup. Start with no VMs running. Start one VM from the dashboard. OK. Start another one and everything disappears.
Nope, not reproducable for me
-
Just now, stl88083365 said:
Update to RC6, I also encounter this problem, but I only have one virtual machine. When I stop the virtual machine, it will be displayed on the page and disappear when I run it.
Please post diagnostics, because this issue is not reproducable.
-
Check if there is no conflict between the two VMs you want to run.
Did you do hardware passthrough and both VMs share the same resources?
I have 4 VMs running and dashboard behaves correctly.
-
Why did you configure bonding with LACP while only eth0 is up (eth1 is down)?
LACP requires compatible switch support. Does your switch support LACP?
Remove bonding and test with a single interface.
Your snippet shows the normal sequence when starting docker containers, nothing unusual.
-
The file "domain.cfg" has corrupted data.
Open the file in a text editor and remove the offending part
-
I made an update. Thanks for reporting.
-
I made a fix. Thanks
-
1
-
-
Made a correction.
-
This is not a bug, but as designed.
Please make a feature request if you have a more suitable solution
-
47 minutes ago, jbartlett said:
Spoke too soon. Pulled up the Dashboard after rebooting and I see this.
That's a cosmetic bug. Change the interface to monitor to "eth0"
-
18 minutes ago, jbartlett said:
I disabled it in the BIOS.
The above is the 1G interface. Didn't you disable the 10G interface?
-
1 hour ago, Fiservedpi said:
Attached
You have attached the wireguard config files. Perhaps some file mix up?
-
It looks like something hardware related. The interface isn't active.
Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: no -
4 hours ago, Fiservedpi said:
I'm assuming this issue is why.
We need diagnostics to confirm, your assumptions doesn't prove anything.
-
What you describe is expected behavior.
Interfaces do not automatically change assignment depending on cable connection.
"Interface Rules" defines the interface assignments and these need to be adjusted accordingly.
Note: it is not recommended to bond interfaces with different speeds, in general this doesn't work reliably.
-
The eth0 (br0) interfaces doesn't detect a connected cable.
Are you sure you connected to eth0 after disabling bonding?
-
Just did a multi container update and all is working fine for me (Windows 10 + Chrome).
Do you have some plugin installed in Chrome which may interfere?
-
Changed Status to Open
Changed Priority to Other
-
The new version may use memory in a different way as the older version.
People who experienced this type of crashes, usually had bad memory or memory related problems.
Start with running a memory test. This is selected from the boot menu.
-
Same for custom networks, there is no port mapping
-
A "host" network doesn't have port mapping
Change your network to "bridge".
-
You would need to store your passphrase in a file somewhere else, e.g. your PC.
When starting the array then choose the keyfile method and select the file you have created above.
This approach allows UD to work properly.
Disclosure: Unraid 6.9 will support multiple pools, and allows pool assignments to specific VMs and/or docker. Effectively taking over some functionality of UD.
-
4 minutes ago, KingB said:
How can I help?
You did already by telling how your passphrase is constructed. Thx.
@limetech needs to check if the latest modifs on emhtpd, did impact the passphrase processing.
-
40 minutes ago, KingB said:
It worked. Thank you ! So there must be a Bug? Or do you know why the same password is not working as a passphrase?
Needs investigation
6.8.0 RC6 - Starting "ALL" VM's causes VM's to disappear from Dashboard and VM tab
-
-
-
-
-
in Prereleases
Posted
Are the VMs displayed properly on the VM page in this case?