Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,719

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    You could have a script running hourly/daily syncs using rsync or incremental btrfs snapshots.
  2. JorgeB
    Diags are after rebooting so we can't see what happened, re-enable the disks and if it happens again grab diags before rebooting.
  3. JorgeB
    You can edit the Netmask on the flash drive, /config/network.cfg, /24=255.255.255.0
  4. JorgeB
    Nice led work :), like those Cooler Master cases, have some myself.
  5. JorgeB
    This.
  6. JorgeB
    Replace cables and rebuild disk7, then you can run a parity check or just wait for the next scheduled one.
  7. JorgeB
    Start the array in normal mode, emulated disk should mount now, check if contents look correct, also look for a lost+found folder.
  8. JorgeB
    use -L
  9. JorgeB
    There is, but it's much easier using the GUI.
  10. JorgeB
    Try upgrading the LSI firmware to latest, all p20 releases except 20.00.07.00 have known issues.
  11. JorgeB
    Didn't look at the diags yet but based on the list you didn't do the pool device removal procedure.
  12. JorgeB
    Please use the existing plugin support thread: https://forums.unraid.net/topic/34889-dynamix-v6-plugins/
  13. JorgeB
    Not sure what the problem is but you can use the console instead, also don't use -n or nothing will be done, with the array in maintenance mode type: xfs_repair -v /dev/md7
  14. JorgeB
    Do the drives show up in the LSI BIOS?
  15. JorgeB
    Next time please use the existing UD plugin support thread:
  16. JorgeB
    It doesn't create files, just change those sectors.
  17. JorgeB
    Without parity you can add it to the array to an empty slot without issues, if you want to add it to a previously assigned disk slot you still can but need to do a new config first.
  18. JorgeB
    Yes, most of those are wrong, see here.
  19. JorgeB
    Not that I know of.
  20. JorgeB
    Post output of: ls -lah /mnt/user
  21. JorgeB
    Correct.
  22. JorgeB
    https://forums.unraid.net/topic/10229-hpa-aka-why-are-two-identical-drives-different-sizes/ It needs to be on an AHCI SATA port, ideally Intel.
  23. JorgeB
    That's not surprising, also not surprising that the command doesn't work with USB drives. If the drive has a HPA it should still work with USB after it is removed, assuming it's not the USB enclosure/dirive making it smaller, some USB drives are known to be smaller, e.g., some WD drives Mac.
  24. JorgeB
    That is usually a controller issue, try connecting the disk in the onboard AHCI SATA ports.
  25. JorgeB
    Check filesystem on the emulated disk7, actual disk appears to have a power/connection problem, check/replace cables.
×
×
  • Create New...