ceb0610

Upgraded to 6.11.0 and came home to server stuck at "Main" tab with the start button greyed out. Server has been working fine for months and now I am down until support finds time to get back to me. Costing me money with these issues and slow response times.

Server won't stay on for more than 5 minutes without locking up and becoming unreachable. Can't grab anything fast enough while running. Had to disable autostart and grab the attached diagnostics. Any help would be greatly appreciated. tower.ii-diagnostics-20220519-2130.zip

For those getting spammed with "Unable to reach the origin service. The service may be down or it may not be responding to traffic from cloudflared: EOF" errors. I fixed the issue on my end by renewing my SSL Cert after the tunnel was up and running and restarting cloudflared.

Get the following every time I start SABnzbdvpn with wireguard. Container will start up with no internet access. 2021-03-03 18:39:49,441 DEBG 'start-script' stderr output: [#] ip link add wg0 type wireguard 2021-03-03 18:39:49,444 DEBG 'start-script' stderr output: [#] wg setconf wg0 /dev/fd/63 2021-03-03 18:39:49,469 DEBG 'start-script' stderr output: [#] ip -4 address add 10.41.151.89 dev wg0 2021-03-03 18:39:49,479 DEBG 'start-script' stderr output: [#] ip link set mtu 8920 up dev wg0 2021-03-03 18:39:49,500 DEBG 'start-script' stderr output: [#] ip -4 route add 10.0.0.0/8 dev wg0 2021-03-03 18:39:49,501 DEBG 'start-script' stderr output: [#] '/root/wireguardup.sh' 2021-03-03 18:40:45,435 DEBG 'watchdog-script' stdout output: [info] DNS failure, creating file '/tmp/dnsfailure' to indicate failure... 2021-03-03 18:40:45,435 DEBG 'watchdog-script' stdout output: [info] DNS failure, creating file '/tmp/dnsfailure' to indicate failure... 2021-03-03 18:40:45,604 DEBG 'start-script' stdout output: [info] DNS failure, creating file '/tmp/dnsfailure' to indicate failure... 2021-03-03 18:40:45,606 DEBG 'start-script' stdout output: [info] Application does not require external IP address, skipping external IP address detection 2021-03-03 18:40:45,608 DEBG 'start-script' stdout output: [info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment 2021-03-03 18:40:45,609 DEBG 'start-script' stdout output: [info] WireGuard interface 'up' Any help would be appreciated.

After setting up Sonarr I get the following pop-up every time I try to access it through the reverse proxy. I've tried enabling and disabling Web Sockets, to no avail. Anybody have this issue or know how to fix it?

I love the docker implementation and how easy it is to educate yourself thanks to this fantastic community. I'd like to see support for a third parity disk (help to ease my paranoia)

Thanks. I hadn't taken a look at them. Looks like the only plugin I would need to replace is "Simple Extractor". New features in "2.0" seem to cover the rest. Here's hoping they allow the built-in extractor to work while "Move Compeleted" is enabled in the next release.

Plugins don't seem to work for V2. Lost my "Sequential Download" and "Simple Extractor" plugins. Is there a workaround or will I have to revert?

I've got my eye on a "SANDISK FUSION IOMEMORY PX600" for my UNRAID server but I'm not sure they are supported. There is a Linux SLES driver for them.

Worked great! Thanks for your help.

Didn't work for me. Sonarr immediately gives me the following Error Message. "Proxy Health Check failed: Error getting response stream (ReadDoneAsync2): ReceiveFailure: 'http://services.sonarr.tv/v1/ping'"

Selling 2x Supermicro CSE-M35T-1B drive enclosures at $60 each. Selling because I updated my unraid server to a rackmount case with its own HDD backplane. I modded these enclosures with Arctic Cooling F9 cooling fans for quieter operation. Both work great. Feel free to contact me with any questions. Enclosures also listed on eBay.

Do I run xfs_repair on each drive?

Should I be able to view the files of an emulated drive from the "Main" tab? unRAID is showing the capacity but when I click the view icon there is nothing there.

First things, first... unRAID Server Pro 6.5.2 ASRock EP2C602 Motherboard 2x E5-2680v2 32GB DDR3-1333 RAM **Diagnostics attached** **SMART Report for failed drive attached** I had an 8TB array disk fail. After restarting my server I noticed that a lot of my library was missing(Had 1500 movies, can only see 500). Plex couldn't see an number of my folders and about a third of my media was visible through windows. Upon further investigation, I found that when I went to the "Shares" tab and drilled down through my media folder everything was missing from there as well. This had me confused because the size of my array hadn't changed. I went to the "Main" tab to confirm what I was seeing but it seems that my missing files are still there and visible on a drive-by-drive level. To summarize; drive died, can't see most of my files on the "share" but files still exist if I look at each drive on the "Main" tab. Any help would be greatly appreciated. I have no idea how to get my media share to show all of my files again. tower-diagnostics-20180525-1522.zip tower-smart-20180525-1529.zip

Had an idea. Let me know what you think.

I have a Logitech G900 and whenever I use it at 1000Hz it slows video playback on youtube and make AutoCAD unusable. I have to drop the polling rate to 250 to remedy this. Would this fix it?

Do I need to restart unraid if I am switchng a graphics card from one vm to another? I have Windows 10 VM running with a GTX960 passed through. The performance isn't what I was hoping for so I created a windows 7 VM that is much snappier, but I can't get it to boot with the GTX960 from my Windows 10 VM passed through (that is with the windows 10 VM off). The VM icon, in unraid , will turn green but the screen won't turn on and one core will e pegged at 100%. Any help would be greatly appreciated.System info below. unRAID 6.4.0-rc7a Dual Xeon E5-2680v2 32GB RAM GTX960 2GB

I got this message from "Fix Common Problems" last night. I've attached my diagnostics. Any help would be greatly appreciated. tower-diagnostics-20180104-0929.zip

I know this is way late, but just had the idea and wanted to get it out there. Let me know what you think.

It is using all disks. Split level is set to automatic.

I have my "Media" share set to High-Water but it keeps writing to the disk s with the least space. I have 2x 5TB drives and a bunch of 2TB drives. The 5TB drives are almost full be unRAID keeps writing to them even though some of the 2TB drives have more than triple the free space. Am I misunderstanding how High-Water works or is there something wrong with its implementation on my install?

Could I setup a docker image to run through this router?

Has this issue been resolved? I just recently put my server on an APC SMART UPS 3000 and I'm not getting all the info. I'm running 6.4 rc7 and I'm connected via USB.

+1 for ISCSI support.