-
Posts
104 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by BomB191
-
-
interesting read. But it doesn't seem anyone has solid evidence that changing that will improve anything from what I can see.
I guess I will need to just keep an eye on it and hope its holds out until I can afford a new NVME drive.
Thanks for the assistance though
-
20 hours ago, jonfive said:
Is it at all possible to add a "custom" library to watch?
If i were to add another path in the docker config would i be able to select it within unmanic as an additional library - or would that have to be intended in the software to begin with?yeah just create new paths. all the container needs to see is /library then you can sub folder that out.
- 1
-
9 hours ago, trurl said:
And did you reformat your SSDs to the new alignment?
There's a new alignment?
I'll have to dig into the patch notes and find out what your talking about.
Update: well the link to it on the patch notes goes to a dead page https://wiki.unraid.net/Unraid_OS_6.9.0#SSD_1_MiB_Partition_Alignment
Google is proving useless too.
Why would I want to change this?
-
7 hours ago, trurl said:
Have you upgraded to 6.9 yet? It had some things intended to alleviate some of this.
yes I am on the latest version of Unraid
-
To be fair since I removed my VHD from the drive I usually float around 300GB (plex images and all that fluff).
Mover never operates as I have moved downloads to a HDD to you know cut back on read writes, I also have moved plex transcoding to RAM.
So its primary function now is just appdata and plex stuff
-
-
So I have a 1TB Samsung_SSD_970_EVO. That I have abused to death (though it still functions)
I cannot afford a new drive for a while so I'm thinking to cheaping out if my logic is correct on the matter.
If i can shrink the volume to 500GB that should give the drive 500GB spare for all the dead areas.
In theory extending its life because now it has 50% of the drive at disposal instead of the standard 10%
I however cannot find anything speaking towards shrinking a volume of a single drive just drive swapping and cache pool changes.
Is this something that A. Would work B. something that can be done and C. not completely stupid.
Basically I need to extend the life of the cache drive for as long as I can until I can afford a new NVME drive (I need an array drive first)
-
7 hours ago, regorian said:
I am having a fairly similar issue, where the webui becomes unresponsive and playback is interrupted. Restarting the container resolves this, however I did not notice any events within the container log that may point to an error. I will be on the lookout the next time it occurs.
From what I could understand of them nothing popped out saying this is why I'm broken either.
-
So I have a weird one. After one of the most recent updates my server becomes unresponsive and requires a reboot.
What logs do you way smarter people need to help me out?
I have a fairly large library but nothing has really changed so im struggling to understand why thing have all of a sudden gone durp
-
-
I'm having the same issues as skaterpunk0187
Telegraph logs are fine though.
@falconexe 1.5 never worked for me either SMART, Array size, Mounts and disk usage did, drive selection has not
-
2 hours ago, HagenS said:
Ok - no answer for my problem, but one more user with same error... I solved this for me by removing the line
$.['vm']['details'][*].primaryGPU
from definition. Now the error is gone. For me the info is not needed.
This worked for me also.
Now I just have the lack of drive selection up top
-
I seem to be having a few other issues.
Images are fixed but VM info, server name and being able to select drives is causing me issues.
The drives are weird because the show up properly in "array disk storage and "drive SMART health overview"
Server hardware also works as intended. so Im not sure why its half working
-
2 minutes ago, JorgeB said:
SMART is failing because it reached 100% estimated life, doesn't mean the SSD is failing, my NVMe cache device is currently at 113%, I and hope it will reach at lest 200%.
Oh Sweet that's good to know. I just couldn't understand how the has 10%(total size I presume) spare and 94% availability.
So percentage used is it's idea of saying its EOL. I'm basically going to run this until it dies everything's backed up
-
so I think I know why its failing (i have murdered it over the last 2 years) but reading the smart I don't understand where its failing.
It doesn't help I can't make it do any of the self tests, or the finish instantly I'm unsure
-
10 hours ago, cjjermont said:
Can this run alongside plex with one gpu?
Sent from my iPhone using TapatalkI don't do it myself but I'm fairly sure what your doing with the GPU is passing it though to a docker so if its in plex nothing else can use it.
I might be way off base though.
-
@Squid figured out what I was trying to explain
but yeah as long as every folder your dealing with is in the /library/ (within the container) its not going to care. just means you need to make a heap of custom paths in the container setup
-
19 hours ago, TexasDave said:
I also would like to avoid conversions on certain TV shows - mainly the "daily" ones.
Yeah just make sure it starts with /Library/ then 'whatever you want to name it'/files
So the container path can be /library/movies1 /library/movies2 etc. im sure you could go has hard as you want until you break something
I presume it just NEEDS to be in /library/ within the container after that have a party
-
7 hours ago, belliott_20 said:
Multiple Watch Libraries:
Previously I had been able to configure multiple watch libraries/folders (ex Movies/TV Shows) based on your instructions within the configuration of Unmanic.
On the most recent build/version I still have it set the same with multiple watch libraries/folders as before but it will only watch the library entered in the WebGui which only has a spot for 1 and not multiple. Therefore I can no longer have it watch both my movies & tv shows.
Am I maybe missing something in my setup configuration?
For the time being I am running 2 docker containers with one pointed to my TV Shows and the other pointed to my Movies. Which is working out just fine.
**Also I can't thank you enough for this program! I have converted I'm guessing somewhere between 5-10TBs worth of my media files so far. Now with the GPU features added its made it significantly faster and easier on my server. Keep up the great work and know its appreciated!**
Set yours up like this (you don't need user0 I'm just playing around)
and within unmanic
-
8 minutes ago, aptalca said:
Https default is 443. If you use a different port, you'll have to define it to browse it like https://domain.com:1443
Ah OK so basically the same I had before. good to know, thank you.
-
5 hours ago, aptalca said:
Did you Google error 522? It tells you exactly what the problem is. Cloudflare can't reach your server. Check your port forwarding
OMFG! ok so i shouldn't do stuff on 3 hours sleep. I was under the impression I could use port 180 and 1443 externally But couldn't figure out how it was mapped. forwarding port 80 and 443 works. I am an idiot. Thanks for the assistance
Makes me wonder though can one change the external port used to not be 80 or 443? or is that something embedded withing the protocol?
-
Ive been banging my head on this all day. I have my domains DNS linked up with cloudflare and cloudflare pointing to duckdns pointing to me.
Lets encrypt got its cert all fine and happy as.
I'm currently only trying to get ombi and nextcloud sorted out and have followed space invaders videos on lets encrypt and dns certs
What else do you guys need to help? it should just work but i only get 522 errors
I feel ipv6 might be screwing things up but i have ipv4 and 6 forwarded. I'm at a complete loss
-
On 3/17/2020 at 12:02 PM, eagle470 said:
One thing I would really like to see is a CPU Scaler to limit the app from pegging the CPU.
No point him wasting his time on that when Docker can already do it
-
On 3/3/2020 at 3:44 PM, klipp01 said:
So no it appears it is trying to convert my TV Shows but nothing get converted and no errors or failed conversions. Not sure why it is converting my Movies fine but not doing anything but spinning its wheels with processing my TV Show Library.
No ones going to be able to do anything with logs.
[Support] Josh5 - Unmanic - Library Optimiser
in Docker Containers
Posted
Always recommend testing on a set of files before you let it loose