DDock

Recently started having issues after upgrading to 6.12.2 where Sonarr/Radarr will stop moving files from qBittorrent. I've had this setup running for a couple years now without issues. All dockers are up to date Binhex versions. I have a spare drive mounted via Unassigned Devices used as a scratch disk to download files from qBittorrent as not to put extra write cycles on my Cache SSDs. qBittorrent is installed natively to this scratch disk and then Sonarr/Radarr are installed on my Cache SSDs. I have tried changing the Access Mode to various RW/Slave/Shared between them all and nothing seems to work. I had first changed it all to RW-Slave as Fix Common Problems didn't like that those were mounted using RW and not RW-Slave. I've checked all kinds of things and can't seem to get Sonarr to work. I think Radarr is working, but hasn't been queued to download anything recently. No other connection errors between the dockers. Is there something I'm missing? Thanks for any help the community can provide.

We have used Cloudberry at work for awhile and they have now rebranded over to MSP360. They are concentrating on MSP's at this point. This might be what you guys are looking for: https://www.msp360.com/free-products/ I have gotten the Linux licenses from here and setup new unRAID backups since.

Thank you. I didn't see the update still, so I forced update and BAM, now it finally got updated to the 3.3.xx. Not sure why it wasn't showing updates, but we are all good now. Thank you again.

I am having an issue with a new install of Cloudberry Backup. It ran fine for a few days and now whenever it tries to backup I get a SSL Cert Problem; Cert has expired error. I did try to contact Cloudberry support, but they told me that I need to update. I tried to run the update from within the docker using the webGUI, but it seems to try but then gets stuck updating until I reboot the docker container. I did see a mention from a month ago that you were working on updating to the 3.2.xxx version. Is there any progress on this? Is there something I could do to assist?

I have been having an odd issue I've noticed from time to time. My CPU will just go crazy. Looking into it it seems the process that is repeated many times is "/usr/bin/sha256sum -b /mnt/.....". The file that is being crunched on is a file being downloaded by my binhex-qbittorrentvpn docker. If I stop / restart the docker this process still does not go away. I am wondering if it might be dealing with the File Integrity plugin I have. I added the share to File Integrity's ignore list but it is still crunching away on the files. I plan on doing some work to my server this weekend, so at this point I have not restarted since I made the changes to the File Integrity plugin, but wanted to get so input. A second thing I found while trying to track this down was this error in the syslog and want to make sure it isn't something I should be concerned with. I haven't had issues with USB, but I don't really use the USB on the server. My DNS update script ran between these entries which is set to run every 5 minutes to update the IP for my domain. This repeats regularly though the log. Oct 23 04:44:02 Tower kernel: usb 2-5: reset high-speed USB device number 3 using xhci_hcd ### [PREVIOUS LINE REPEATED 170 TIMES] ### Oct 23 04:49:02 Tower kernel: usb 2-5: reset high-speed USB device number 3 using xhci_hcd ### [PREVIOUS LINE REPEATED 149 TIMES] ### tower-diagnostics-20201023-0955.zip

Yep! must have been a bug. Thanks. Had me a bit worried that you might have discontinued the project or something. Cheers and thanks for all the hard work!

Any ideas why this is showing up for this docker? None of my other dockers show this: I have not made any changes but noticed this has changed to not available. I haven't checked things in about a week, so it would have happened between then and now.

I recently upgraded from a single 1TB SATA to 2 1TB NVME M.2 SSDs and switched to using a cache pool for my new server upgrade. First I added 1 of the NVME drive's to the cache and it created the cache pool. I waited for the balance to finish and everything looked fine. I then removed the SATA SSD and replaced it with the second of the NVME SSD's and everything rebuilt and seemed fine... Today I shut down the server and removed the old SATA SSD that was listed in unassigned devices and my cache pool broke. The first drive in the cache shows up as Unmountable: No file system. I started looking around and ultimately decided to just throw the SATA SSD back in as an unassigned device, and voila everything is working again. What the heck is happening? I did initiate a btrfs Balance to see if that fixes it. It is currently running. I don't actually recall a balance happening after replacing the SATA SSD with the second NVME SSD. Any other thoughts?

Just to make sure I'm running the proper command I'm just deleting the attribute user.sha256 and not the other user.xxx attributes? Thank You for sending me down the correct path.

I'm having an issue that since I installed the plugin again like 1-2 months ago. I had used this plugin a long time ago and decided to install it again. It has consistently shows 5 files that are corrupted ever since I reinstalled it. Not sure if these are because there were some files left behind from the previous install of this plugin. 4 of them are just NFO's and one is an MKV. Is there a way to acknowledge the error so it stops reporting it or what is the best way to handle it.

I can't seem to find a way to search this thread. I haven't done much posting recently. I just added this plugin to my 6.5 unRAID server. I am having some issues with a VM that runs my Security Camera Software. I am thinking the issue is the slower write speeds to the array so I am wanting to offload the VM onto a single mount. All seems to be working well with the exception that my Shares in the normal unRAID GUI are not showing up. Any thoughts?

Can we get an update to a 5.6.x build so I can patch the WPA2 KRACK. Please and Thank You.

Just curious, was looking around Zoneminder's wiki but can't find anything about this camera. Seems to be a good price for what it is and has decent reviews on Amazon (3.5 stars). Here is the sale link page: http://flash.newegg.com/Product/9SIA7EX3TT9786

That was it, I must have borked something up somewhere. I put those 3 files in there again and it seems to work now. Thanks for the help. I did grab the UDP server download zip from another part of the site, maybe that one is not quite right somehow.

Nope, didn't help at all... still back to: 2016-10-14 06:59:44,834 DEBG 'start-script' stdout output: Fri Oct 14 06:59:44 2016 UDPv4 link local: [undef] Fri Oct 14 06:59:44 2016 UDPv4 link remote: [AF_INET]104.129.28.66:1912 2016-10-14 07:00:44,834 DEBG 'start-script' stdout output: Fri Oct 14 07:00:44 2016 [uNDEF] Inactivity timeout (--ping-restart), restarting 2016-10-14 07:00:44,834 DEBG 'start-script' stdout output: Fri Oct 14 07:00:44 2016 SIGUSR1[soft,ping-restart] received, process restarting 2016-10-14 07:00:46,884 DEBG 'start-script' stdout output: Fri Oct 14 07:00:46 2016 UDPv4 link local: [undef] Fri Oct 14 07:00:46 2016 UDPv4 link remote: [AF_INET]104.129.28.42:1912 2016-10-14 07:01:46,903 DEBG 'start-script' stdout output: Fri Oct 14 07:01:46 2016 [uNDEF] Inactivity timeout (--ping-restart), restarting Fri Oct 14 07:01:46 2016 SIGUSR1[soft,ping-restart] received, process restarting 2016-10-14 07:01:48,946 DEBG 'start-script' stdout output: Fri Oct 14 07:01:48 2016 UDPv4 link local: [undef] Fri Oct 14 07:01:48 2016 UDPv4 link remote: [AF_INET]104.129.29.34:1912 Could it be because the UDPv4 link local: [undef] is supposed to have an IP in it like the UDPv4 link remote: [AF_INET]104.129.29.34:1912. I'm guessing the Remote is to the vpn and the local would be how I would connect?