Dextros

Thanks @xthursdayx This was not a flashing issue, but a heat issue. To resolve this, I glued a 80mm fan on top of my power supply pointing at the Pike card, and USB Stick. They are in a very similar place on the Asus Z9PA-D8. Throughout the use of the server, I ended expanding to 12 Hard Drives, and never had a problem with that card again. I also completed this mod into my fathers machine, which resolved his also! Its now sitting in the corner as I am now using a Ryzen 2 build, and the Asus Z9PA-D8 will be used again as a virtualisation server, as soon as my workshop is completed. I hope that helps.

Hi dlanldon, I initially did not post here, as I do not believe this to be a UD issue, but what do you think of; Thanks

Hi, I am having an issue since I have upgraded from 6.7.2 to 6.8.0 The issue I am facing is that I use Resilio Sync to bring (HardLinked) files across from a dedicated server onto a local UD Share. I then use a Linux VM with Filebot installed to rename the files, and push them to different shares. I am now getting permission denied when trying to run FileBot. The docker access mode is set to RW/Slave to access (/mnt/disks/500gb/Renaming/Process/) If I browse to the share (In windows), I can create a text file in the correct location, and this new text file with have read + write permissions. I have logged into the console, and ran newperms /mnt/disks/500gb/Renaming/Process/TV - this fixed the problem short term. Just as a general note, from within the Linux VM, I can create a file within /mnt/disks/500gb/Renaming/Process/TV/ but I could not create a file, in the newly synced files withing TV/xxx/. I can from Windows. I can even rename the files from Windows. I have run out of ideas/options. HardLinked pre synced file permissions -rw-rw-r-- After sync has occurred -rw-r--r--+ /etc/fstab //192.168.1.10/500gb/Renaming /home/dextros/renaming cifs guest,uid=dextros,gid=dextros 0 0 mount //192.168.1.10/500gb/Renaming on /home/dextros/renaming type cifs (rw,relatime,vers=default,sec=none,cache=strict,domain=,uid=1000,forceuid,gid=1000,forcegid,addr=192.168.1.10,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1) I have tried running with 0775 and 0777 and no dice. I don't even know if I am explaining this correctly. Thanks for any assistance, and hopefully someone can point me in the correct direction. ryzen-diagnostics-20191214-1254.zip

Hi Guys I am having trouble with the ZM container. SQL is failing to start. I cannot get into the container to assess the situation, as it instantly runs scripts as soon as it starts. There were some extra logs earlier which looked like it was trying to upgrade mariadb to V10? The few seconds I did get inside the container, it showed two processes of mysqld one of them was running as root mysqld_safe or something like that. Can anyone point me in some form of direction? Thanks * Starting MariaDB database server mysqld ...done. Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[918]: Upgrading MySQL tables if necessary. DBI connect('database=zm;host=localhost','zmuser',...) failed: Lost connection to MySQL server at 'reading initial communication packet', system error: 104 at /usr/share/perl5/ZoneMinder/Database.pm line 109. DBI connect('database=zm;host=localhost;mysql_multi_statements=1','zmuser',...) failed: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) at /usr/share/perl5/ZoneMinder/Database.pm line 109. Database already at version 1.32.3, update skipped. Feb 19 11:23:46 2ec60b177ec3 zmupdate[919]: ERR [Error reconnecting to db: errstr:Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) error val:] Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: Looking for 'mysql' as: /usr/bin/mysql Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: Phase 1/6: Checking and upgrading mysql database Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: Processing databases Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: mysql Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: /usr/bin/mysqlcheck: Error: Couldn't get table list for database mysql: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111 "Connection refused") Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: Phase 2/6: Fixing views Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: /usr/bin/mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111 "Connection refused") when trying to connect Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[922]: FATAL ERROR: Upgrade failed Feb 19 11:23:46 2ec60b177ec3 /etc/mysql/debian-start[945]: Checking for insecure root accounts. ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111 "Connection refused") DBI connect('database=zm;host=localhost','zmuser',...) failed: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) at /usr/share/perl5/ZoneMinder/Config.pm line 117. Can't connect to db at /usr/share/perl5/ZoneMinder/Config.pm line 166. BEGIN failed--compilation aborted at /usr/share/perl5/ZoneMinder/Config.pm line 166. Compilation failed in require at /usr/bin/zmupdate.pl line 71. BEGIN failed--compilation aborted at /usr/bin/zmupdate.pl line 71. * Starting Apache httpd web server apache2 * Starting ZoneMinder: DBI connect('database=zm;host=localhost','zmuser',...) failed: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) at /usr/share/perl5/ZoneMinder/Config.pm line 117. Can't connect to db at /usr/share/perl5/ZoneMinder/Config.pm line 166. BEGIN failed--compilation aborted at /usr/share/perl5/ZoneMinder/Config.pm line 166. Compilation failed in require at /usr/share/perl5/ZoneMinder.pm line 33. BEGIN failed--compilation aborted at /usr/share/perl5/ZoneMinder.pm line 33. Compilation failed in require at /usr/bin/zmpkg.pl line 34. BEGIN failed--compilation aborted at /usr/bin/zmpkg.pl line 34. ZoneMinder failed to start *** /etc/my_init.d/40_firstrun.sh failed with status 255 *** Killing all processes... Feb 19 11:23:55 2ec60b177ec3 syslog-ng[16]: syslog-ng shutting down; version='3.5.6'

Sorry had a client have a major server breakdown and have been working relentlessly on that. I am fairly sure that I have no ports forwarded. I will confirm it tomorrow ish. I may have a DMZ set up though. My only problem is that when I get a link to share, I have to copy and paste my current external ip address and replace my internal ip address with it. I will confirm tomorrow. L Edit: I do have a port forwarded. Its for the plex docker - 443, but due to Plex being Host and Nexcloud being bridge, they both use it. So no, without forwarding ports I dont think it will work.

Hi I use owncloud/nextcloud for sharing whole directories at the same time. Have a look at that

Oh wow, thats very flexible, and has now given me some other ideas! Thank you!

The container doesn't support monitoring lots of folders and running different scripts. I would recommend simply running multiple containers which different configurations. They're very lightweight. Just point each container to each subdir for the input and output. That said, the default config handles different input types already, putting them into subdirs in the output dir. Did you try it? It only occasionally gets confused and renames a tv show to a movie or vice versa. If you do want to rewrite filebot.sh, what you can do is have multiple commands run in each of the subdirs of the parent input dir. e.g. if the monitor sees a change in input/tv, it will run your filebot.sh, which will process input/tv, input/movies, and all the other subdirs. (Just specify the parent input dir as the one to be monitored.) If you go this route, be sure to leave VERSION as it is in your script. That way if I ever update the default script, it will give you an error so that you can see if the new changes need to be reflected in your script. Thanks Coppit. I ended up running a windows VM just for the minute. I am intrigued as to how to run multiple containers. How would I go about this? I am in the process of making my Dads unraid server, and will test it on his first. PS, your name rings a bell from elsewhere on the internet!

Hi I am coming over from windows, and I am trying to convert to dockers. Currently, I have the following /process/tv /process/film /process/music /process/misc /process/r5 /done/tv /done/film /done/music /done/misc /done/r5 I use task scheduler to run a typical task -script fn:amc "D:\process\TV" --output "D:\done\TV" --log-file amc_TV.log --action move --conflict auto -non-strict --def clean=n --def deleteAfterExtract=y excludeList=amc-input_TV.txt pushover=xxxxxxxxxxxx "seriesFormat=E:\_TV Shows/{n}/{'Season '+s}/{n} - {s00e00} - {t}" All my current taks do different things, where I have experimented. It also pushes it to the final location, which is in normally a plex media folder. I cannot find any documentation, but how can I run 5 different scripts. Do I have to add them to FileBot.sh at the bottom? Or do I create different xxx.sh for each respective task? KRs Lee

Did you flash the card or was it working out of the box? It appears to be working out the box, but to be fair, the other worked out of the box as well! I have another build to do at the weekend, with exactly the same hardware, so I will just use the 2008 straight away.

Thanks, Fireball. Noted! I have just installed the Pike 2008 and Its doing a preclear on the drive as I type, and it's nearly complete, using the controller. I am going to plug more devices onto the controller, and see how it acts. If it is working ok, I will try and get a refund for the other cards, or at least attempt a to return under fault, as they work for a small period, and then fail. But the odds of getting two bad cards must be fairly small. Thanks

Hi Yes, I could not complete a full parity check. I have taken one cache drive out, and put the parity and disk 4 on the MB for the moment, and everything is running perfectly. I have now completed a full check, and the system has not restarted since. It happened with both brand new Pike 2308 cards I had, and 2 x Pike 2008 have just turned up, so I will be testing them later tonight One thing I did notice is that they run extremely hot. As in I couldnt touch them hot. I am using an Define R5 case, and there is not alot of air flow down in the corner above PS. I have opened up the rear IO Plates, have a small desk fan blowing into the corner of the case now. So now i can touch them. KRs Lee

Hi I have been having troubles with my new Asus Pike 2308 on a Asus Z9PA-D8 Jun 14 13:40:41 xeon kernel: mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!! Its giving me troubles. What should I be looking for to flash to IT mode. I have just ordered the Pike 2008. There are two switches. https://manualscollection.com/?fid=612a388fde452ec7c4db827d48ff042e&read=online I can get jbod to be recognised in the wrong switch order, but it gives me errors. As soon as I turn it to the correct switching order it doesnt work. So I am looking to flashing if possible. If there is any adivse that any one can give, I would appreciate it. Thanks Lee

Thanks for the info. I have seen that the 2008 and have it working. Please see attached diag zip Also is it possible to install extra drivers? xeon-diagnostics-20160613-1536.zip

Hi Just to update. I just upgraded to the new Beta version. I then installed another new Pike card I had for a new system, and I get the same thing. I am just about to change the cables, even though they are brand new. newpikecard.txt