-
Posts
15,089 -
Joined
-
Days Won
193
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Report Comments posted by ich777
-
-
I‘m on it, plugin is coming today with the OOT drivers, give me a few hours… 😉
- 2
-
39 minutes ago, Tristankin said:
But if it makes the system stable I am happy.
But if this is the case then this has nothing to do with the iGPU transcoding...
Where is your transcoding temp directory located? Have you changed it to something else than default? Maybe this is the cause of the issue but it would be the first time I hear of that.
40 minutes ago, Tristankin said:I have just changed it.
It should be also good if you have it on Prefer as long as the Cache doesn't is filled up completely.
-
@Tristankin & @muzo178 you can at least try to change the container to the official one and see if that males a difference, they should be all interchangeable and you only have to replace the Repository in the template.
But just to be sure create a backup from you plex directory in your appdata folder so in case that something goes wrong you can revert back <- but it shouldn‘t go anything wrong.
- 1
-
4 hours ago, Tristankin said:
But I would need to turn off plex to isolate it correct?
You can disable transcoding in Plex or better speaking disable HW transcoding.
4 hours ago, Tristankin said:It happens randomly so I would need to turn off my plex service for a few days to test correct?
No, if your system is fast enough to keep up with software encoding for the time you test Jellyfin it would be fine.
Maybe test it intensely while playing a file over and over.
4 hours ago, Tristankin said:Ok, so need to keep the monitor plugged in and turned on till it crashes.
Exactly, then you can take a picture of that and maybe we can see more...
4 hours ago, Earendur said:i5-12600k
Please remember this is the non Alder Lake thread...
4 hours ago, muzo178 said:plex transcoding i915
Are you both on the official Plex version?
Can you post your Diagnostics too @muzo178?
-
6 minutes ago, Tristankin said:
So if i issue that commend it will prevent sleep and show the last error on the screen so when I swap out the dummy plug for the monitor again I can grab a screenshot?
No, you have to connect a monitor, swapping out the dummy plug with a real monitor won't work in most cases because the EDID is not the same on the dummy plug as on the monitor and because your system crashed the driver can't initialize the new EDID, hope that makes somewhat sense to you.
7 minutes ago, Tristankin said:I have about 50 users on my plex so I can't see a good way of switching over to jellyfin, that would be a last resort option.
But that is not the question, the question is if the same crashes happen on Jellyfin too...?
-
35 minutes ago, Tristankin said:
I have had years of stable operation with 6.8.3. Anything with the 5.x kernel freezes. Do you have VT-d enabled on your system? I am not the only one experiencing this problem so there is something causing an issue and after trying to find a solution for over a year I am still no closer. You can understand that is pretty frustrating right?
I just want to report my experience with it.
I have VT-d on one system disable and on the other it's enabled.
Please post your Diagnostics again from a 6.11.5 installation.
I can't remember but have you tried Jellyfin back then and if it's the same?
Are you also able to hook up a monitor to your system and issue this command from a Unraid console (this will prevent the monitor going to sleep):
setterm --blank 0
With this you will be able to take a picture when the crash happens since most of the times the syslog server will not be able to record those issues.
-
2 hours ago, Tristankin said:
Another one today.
I have now the following Intel CPUs tested with Unraid 6.11.5:
i3-6100T, i7-7700, i5-8400, i5-10600, J4105, i5-6300U and G4400T
Motherboards are Asrock, Asrock, Fujitsu Esprimo, ASUS, Fujitsu Futro, Fujitsu Laptop, Fujitsu Esprimo.
None of them crashed so far after about a month of uptime and continuous transcoding with Unmanic on Unraid.
Most of the systems don't have anything else installed than Intel-GPU-TOP and Unmanic.
-
4 hours ago, AnimusAstralis said:
I'd appreciate if someone can help me to pinpoint a cause of these hangs. Diagnostics attached.
Please try to use ipvlan instead of macvlan in your Docker settings.
I would recommend to create a dedicated bug report since this seems not related to this issue.
- 1
-
16 minutes ago, Simon82 said:
yes I have a mixture of docker networks but it has never been a problem. What sort of problem does it cause in my current config?
Please change the Docker network to ipvlan.
macvlan is known to crash servers.
You have started using Frigate or am I wrong? Maybe that is causing crashes in combination with macvlan.
Please change it as described above and see if it crashes again.
-
@Simon82 I see no indication that your iGPU is even enabled in the Diagnostics that you've attached. I only see the Nvidia GPU.
Do you have a mixed network configuration for your Docker containers, for example some use bridge, some use br0 and so on? If yes, make sure that you set your "Docker custom network type" to "ipvlan":
-
46 minutes ago, Simon82 said:
The crash’s/unresponsive events can happen any time with or with out Plex transcoding. Frigate is constantly using quicksync to decode video
Please post your Diagnostics.
-
16 hours ago, 20051231 said:
I suspect because my old custom scripts for installing TPM support before unraid officially supports it but removing the script still no luck.
5 hours ago, bkingsolver said:I followed instructions in the forums to add TPM support before it was officially supported by unraid.
Did both of you follow the same guide? Can you please point me to the Guide(s) you where following?
I think your best bet would be to recreate your libvirt image and recreate your VM's afterwards with OVMF TPM.
So I think this issue is not directly related to Unraid 6.11.1 instead it is related to the custom script that you where following to get TPM working right?
-
On 10/9/2022 at 12:39 AM, Paulo Vieira said:
Seeing Exactly the same issue with my Windows 11 VMs. I´m going to try and revert back to 6.10......
Please provide your Diagnostics.
-
On 10/10/2022 at 4:39 PM, bkingsolver said:
correction on this: the OVMF TPM VMs work fine on 6.11.0 and broke on 6.11.1. I'm not sure why I entered 6.10.0 in the bug report.
@Paulo Vieira - I reverted from 6.11.1 to 6.11.0 and the VMs worked fine for me.
Can you try to change the name from the VM from "Darth-Eleven" to "DarthEleven" and see if this fixes the issue?
-
1 hour ago, JorgeB said:
sorry for the extra work @ich777
No worries.
Was also curious if it‘s working and recompiling the Kernel or creating a Unraid version with another Kernel version is not that of a big deal for me. 😅
- 1
-
-
7 minutes ago, JorgeB said:
True, maybe not the same issue them, @ich777any idea since you're the one who found those links?
I will create a custom build with Kernel 5.19.12 (latest stable) later today and see if it fixes the issue on my Cherry Trail machine too.
-
12 minutes ago, flyize said:
edit: Now enough Alder Lake!
Don't know how I should react to this post with or this .
-
3 minutes ago, airlychee said:
I usually use plex, just tested jellyfin in 6.10.2, everything seems to be working fine, but plex still crashes unriad...
Then this is a pure Plex issue and I would recommend that you post on the Plex forums or in the corresponding support thread for the container.
-
1 hour ago, airlychee said:
I am using J3455-ITX, and the transcoding worked fine in 6.8.3. But since 6.9.x, there has been a crash during the transcoding process.
Have you yet tried to use 6.10.2?
What container are you using for transcoding? If Plex, have you tried anything else so far?
-
19 minutes ago, airlychee said:
How did you add guc to kernel parameters?syslinux.conf of modprobe.d/i915?
What CPU are you using? Keep in mind this thread is not for Alder Lake!
On 11th Gen+ GuC is enabled automatically.
Read this:
-
1 hour ago, flyize said:
I wasn't asking about Alder Lake
But this is mainly a Alder Lake or better speaking Tiger Lake+ issue and it needs to be activated there so that everything works properly...
- 1
-
7 minutes ago, flyize said:
Can someone explain to a layman what the GUC setting does?
I think the simplest way to describe it is here.
QuoteThe Graphics micro (µ) Controller (GuC) is designed to offload some of the functionality usually run on the host driver. This functionality includes:
- Authentication of the HEVC/H.265 micro (µ) Controller (HuC)Enables use of HuC codec acceleration extensions by the iHD Intel media driver (described below).
- Low level graphics context schedulingGuC context scheduling operations will include determining which context to run next, submitting a context to a command streamer for a next available engine and pre-empting and resubmitting existing contexts as required. With the GuC selecting which context to submit and the actual engine instance to submit to, it is also responsible for detecting hangs and initiating engine resets.
Maybe also worth mentioning Kernel 5.18.2 and 5.18.3 in combination with Unraid works fine with Alder Lake and HW transcoding (currently Jellyfin tested), I think even Plex even fixed their custom version from FFmpeg that causes crashes with Alder Lake.
...please also note that this is not a Alder Lake Bug Thread!!!
- 1
- 1
-
11 minutes ago, Earendur said:
What's the risk if I switch to IPVLAN?
From my perspective nothing, I run it since it was introduced.
Keep in mind some routers have issues with this, especially the Fritzbox from AVM, nothing bad should happen, you can always go back to MACVLAN.
[6.10 rc3 - 6.11.5] Realtek RTL8156 USB 2.5Gb NIC not working
in Stable Releases
Posted
I have now uploaded the plugin and it should appear in the next few hours in the CA App.
Please note that this plugin currently only supports Unraid version 6.11.5+ and you will only see it if you are at least on that version.
Here is the direct plugin link:
ATTENTION: You have to reboot after you've installed the plugin because I really don't like messing with such critical drivers when the system is running, as a side note if you ever upgrade to a newer Unraid version you have to reboot again after the upgrade because the updated package is only pulled on reboot for the new Unraid Kernel version.