-
Posts
15,089 -
Joined
-
Days Won
193
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Report Comments posted by ich777
-
-
39 minutes ago, EntropyInjection said:
I can't access the server or data because it will not boot.
No, wait, that's not what this issue is for...
There must besomething else going on on your system, can you provide a photo when the server is booting?
40 minutes ago, EntropyInjection said:It seems to be a known issue (it was just unknown to me).
No, the issue that you describe is completely different and is not related to this issue, you even can prevent the module from loading.
-
1
-
-
3 hours ago, EntropyInjection said:
Is the Unraid team working on this or are we being ignored? This seems to be a critical issue for a ton of folks.
Can you please provide your Diagnostics?
You haven't even told what motherboard you've upgraded to.
3 hours ago, EntropyInjection said:My infrastructure is down and I cannot access any of my servers or data on that machine; complete productivity halt.
Why? How do you access your server? Many users including me are using the Unraid server with a Intel GPU without any issues.
-
1 hour ago, Ruato said:
ECC-memory is also mentioned when googling about zfs. Is it more important than with xfs for example? Of course, ECC should always been used but I guess most of Unraiders do not have ECC in their systems.
Please see this post from the ZFS Guru Allan Jude itself from Twitter, @steini84 sent me this a long time ago:
Sure thing ECC is "better" then non-ECC but most users are basically home users, for businesses I really get the point of ECC, at least that's my perspective.
I don't use ECC in my system either and use ZFS for now about 3 years and have had zero issues.
-
2
-
-
9 hours ago, Paul_Ber said:
Is Docker changing?
7 hours ago, BRiT said:Fortunately 6.12.x versions support alternate Repositories.
Yes, but only for organization accounts.
Community accounts will stay untouched.
BTW, this would be better suited in the General sub Forums.
-
2 hours ago, SmartPhoneLover said:
The same for me is happening with Firefox (latest update). But, if I try to open with Chrome, it doesn't.
Please see: Click
-
On 3/16/2023 at 2:04 PM, Liwanu said:
Only one issue left that i can tell. The top of the Web GUI looks a little strange, there are side to side scroll arrows. I tried opening in incognito to make sure it wasn't a cache issue and it's still there.
Try a different browser please and/or the same browser from a different computer.
This is a browser problem and was already reported in the testing phase, not sure what causes this.
Make also sure that you've installed the GPU Statistics plugin from @SimonF since @b3rs3rk hasn't merged his PullRequest on GitHub yet and the Plugin from the CA App is not compatible yet with 6.12:
https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg
-
14 minutes ago, hot22shot said:
Does the 6.1.19 kernel includes the amd-pstate-epp driver for better power management (https://www.phoronix.com/news/AMD-P-State-EPP-Linux) ?
The AMD pstate driver for AMD is not enabled AFAIK.
I will keep you updated, maybe it will make it into 6.12.0-rc2
-
5
-
-
19 minutes ago, TransformedBG said:
So can i import my current ZFS pool into it? since i was using a user based addon to run it before?
Please look at the changelog (first post):
QuotePools created with the 'steini84' plugin can be imported as follows: First create a new pool with the number of slots corresponding to the number of devices in the pool to be imported. Next assign all the devices to the new pool. Upon array Start the pool should be recognized, though certain zpool topologies may not be recognized (please report).
-
12 minutes ago, Tristankin said:
linuxserver puts the pms install in the following location
But this looks to me that you only have to do your mappings in the Docker template differently and then it should work because they all use Plex as the base app.
I only assumed that it is working because some people reported that they successfully switched from the Linuxserver or Binhex container over to the official one.
-
3 hours ago, Tristankin said:
I tried to change the repository to keep config on the same container. Official would not boot and linuxserver required me to set up from scratch anyway.
Interesting, this is the first time I hear about that, they are usually all intercompatible.
-
6 hours ago, Tristankin said:
I have migrated from binhex-plex to linuxerver/plex.
Why not use the official container instead of using third party ones?
-
19 minutes ago, squiddles88 said:
Edit: I found muzo178 is also using a Terramaster box. I am using a slightly different box that has similar cpu, J3355 vs J3455 (mine). I'll see if I can get a monitor to the NAS as disable VT-d.
Do you have no monitor or dummy plug connected by default? This could also be the issue.
I know many people using such CPUs and having no issue whatsoever using HW transcoding.
-
3 hours ago, squiddles88 said:
I have the exact same issue. It is beyond frustrating that I am unable to use Plex transcoding without hard crashes.
Have you yet read the last 30 comments here in the thread because this is now solved for most people.
-
2 hours ago, muzo178 said:
j3355
It should at lest work on Apolo Lake platforms according to the Quick Sync Video Matrix.
Have you yet tried the official Jellyfin container if it is working there (if you try it, I would recommend that you use VA-API instead of QuickSync to be on the safe side).
-
4 minutes ago, muzo178 said:
Does the hdr tone mapping option in plex work for you?
Are you yet on the official container? Usually the official container will give you the best results/experience.
-
21 minutes ago, Tristankin said:
All C states turned off
This should not be necessary.
21 minutes ago, Tristankin said:VT-d turned off
This too.
Maybe try to revert all your changes one by one and see what causes the issue in your case.
-
2 minutes ago, muzo178 said:
i'm using the linuxserver plex container
Please try the official one!
Have you yet tried to switch over to IPVLAN in your Docker settings, as far as I see from your Diagnostics you are still using MACVLAN which can cause issues, maybe try that first before you switch containers (btw the containers should be inter-compatible so that you only have to change the repository in the Docker template).
Just a few other things in your go file:
#Modprobe it87 drivers for getting the fan speed modprobe it87 force_id=0x8620
If you are on 6.11.5 you can remove that and install my plugin and it should work all OOB (you maybe have to run sensors detect again):
The next thing that I've saw is:
# Fix Docker for 6.8.3- Case Insensitive as per https://forums.unraid.net/topic/108643-all-docker-containers-lists-version-%E2%80%9Cnot-available%E2%80%9D-under-update/?do=findComment&comment=994056 sed -i 's#@Docker-Content-Digest:\\s*\(.*\)@#\@Docker-Content-Digest:\\s*\(.*\)@i#g' /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php
Please remove that and there is actually a similar thing in 6.11.5 because Docker changed a few things for the manifest files but there is also a fix for 6.11.5 in the CA App available:
-
2
-
-
3 hours ago, muzo178 said:
a simple directory fix was was good to be true anyways.
Can you please post your Diagnostics again?
Are you using the official Plex container?
-
19 minutes ago, mechmess said:
I'll report back with my experience in a couple of days. Thanks for the help - my apologies for not getting totally caught up on the current best-practices.
No worries or need to apologize but it was mentioned a few post above yours to change the path to the "real" file path instead of the FUSE file path.
-
1
-
-
31 minutes ago, mechmess said:
6.11.1
Why? Please update to 6.11.5
31 minutes ago, mechmess said:Appdata on Cache:Prefer, with plenty of available space.
Did you also change the path to /mnt/cache/... instead of /mnt/user/... in the template?
-
1
-
-
15 hours ago, bfeist said:
Bus 009 Device 002 Port 9-2 ID 0bda:8156 Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN
Since @JorgeB and you have the exact same device "0bda:8156" (at least vendor and device ID) I assume it has something to do with your testing but that's only an assumption.
Have you yet tried to remove your network configuration entirely and revert everything back to default except for the line in the go file?
15 hours ago, bfeist said:I tried making the device eth0.
That won't work if the USB adapter is not eth0 because you are basically forcing another adapter into a mode which it does not support.
-
9 hours ago, Tristankin said:
but changing appdata to cache yes and moving the config directory to cache fixed it
This is a really bad constellation, please change your appdata share to use cache Only or Prefer.
I hope you know that the setting Yes tries to move the data from the appdata share to the array entirely and on the other hand you are forcing it to stay on the appdata directory...
-
1
-
-
14 hours ago, bfeist said:
Just noticed that it's detecting the USB RTL8156 as a "r8152'
Exactly, this module is used for RTL8152/3/4/6 chipset like the in tree Kernel module.
Please add this line to your go file and reboot:
ethtool -s eth0 autoneg on advertise 0x80000000002f
(please customize eth0 in the above to the corresponding adapter in your system, I think in your case it's eth2)
-
@Squid I have seen that and fixed it already...
[6.9.x - 6.11.x] intel i915 module causing system hangs with no report in syslog (not alder lake)
-
-
-
-
-
in Prereleases
Posted
Are you sire that this isn‘t a hardware fault?