ich777

? For what exactly? I would strongly recommend to pass through the device /dev/dri:

For now it is emulated, haven't got time yet to look into it how to passtrough a real TPM device but when the new unRAID version drops, passthrough should also be possible.

@marcelmarcel hab den Titel mal geändert damit er ein wenig aussagekräftiger ist. Darf ich fragen wie du versuchst die CA App zu installieren und auf welcher unraid version du bist? Hast du PiHole, AdGuard oder Ähnliches in deinem Netzwerk laufen?

But you can still configure it like it is mentioned here: Click I also don't think a Docker compose file is the best thing to create a template, I would stick to the official documentation from the variables itself, I know the Docker compose file is also in the official documentation but you don't have to define everything. You are completely right about the UID, GID and UMASK variables: Click Anyways, if you leave them as they are now you should not run into any trouble...

@ChrisFr & @benediktleb both of you can try to create a variable in the template with the Key: 'PHOTOPRISM_DISABLE_FACES' and the Value: 'true' (both without quotes) and see if this will stop the writes, but keep in mind this will disable face detection. For more variables you can look here: Click

I would recommend to create an issue on their official Github issue tracker: Click I've only created the template for the official Photoprism container. Are you also sure this is caused by Photoprism and not another container? Anything in the logs from the container?

Don't know which plugins or addons you've got installed... This should not happen on a default installation from MagicMirror2. Most of the times this is caused by some plugin because it is deprecated or incompatible.

Contact @Squid about this if you want to publish it in the CA App.

I think some plugin is causing this, I've tried the container now (fresh install) and it works just fine: magicmirror2.log Here is the error that is causing this, are you sure that you've also deleted the magicmirror2 folder that was created in your appdata directory and installed the container after you did so (please back up your configuration file and try a complete fresh install)? Most times some plugins are causing this because the are deprecated or outdated.

But these are the only two from what I see that are not compatible. I've updated the template now but you have to manually update your template since my templates doesn't update automatically.

I don't understand since all the variables in the template already have the prefix "PHOTOPRISM_" For example: Also please note, this is not my Docker container, I've created only a template for unRAID for the official PhotoPrism Docker container.

They work all properly and no this is not a race condition because the apps are properly displayed by date when you click on recently added, but why would I need to sort the apps like name when I'm in recently added? Makes no sense to me, but that's only my opinion...

@Squid oh... didn't know that... Was a cool feature but if it's not a thing anymore... One recommendation would be to hide "Sort By" when the user is for example on the page "Recently Added" because it becomes basically a list of apps sorted by name:

@Squid would it be possible to get the "Recently Added", "Top Trending Apps" and "Top New Installs" back or better speaking that you've set it as starting page instead of showing all? For me it was a super cool way selecting "Recently Added" and look from time to time in there if anything new/useful apps where added.

As said above, GVT-g won't work on 11th Gen CPUs. Only 5th to 10th Gen. are working. For 11th Gen you should be able to use SR-IOV: (Source: https://www.intel.com/content/www/us/en/support/articles/000058558/graphics.html)

Yes, this is a common thing. The problem is that the GT730 is a pretty old card that is based on the Kepler architecture. Nvidia often breaks compatibility for older cards in nvidia-smi so the values doesn't show up when a new generation of graphics card is released. Your card is maybe capable of reporting those values but nvidia-smi can't display it because they actually broke compatibility in some kind of way for this card. Another example would be that even some GTX1050Ti's won't report power draw or other values like in your case. May I ask what you do with the GT730? If you are using it for HW transcoding in Plex keep in mind that this card can't handle h.265 You can also search this thread for "N/A" and you will find more posts about this but there is nothing I can do about that.

No, because this is only the main game running with WINE (which can get pretty unstable at times btw) in a container. The dedicated server isn't out yet from what I know, if they release the dedicated server I can look into it and create a container for it but I don't like doing it that way because it's not official, don't get me wrong, it's a good idea to run it like that but if the developers change something and this would break the container, a lot of people that are using this container would be really dissapointed.

Ja, sonst würde es bei mir nicht funktionieren, bitte auf die offizielle umsetzung von ZFS warten dann sollte es auch funktionieren auf ZFS volumen.

Was heißt das? Dein USB Stick heißt nicht "UNRAID" das heißt das im Normalfall, hast du irgendwelche USB Geräte oder einen ganzen Controller an VFIO gebunden? Wenn du Enter drückst sollte er normal hoch fahren. Das muss aber nicht zwingend was mit 6.10.0-RC1 was zu tuhen haben, ich hab 4 Systeme mit 6.10.0-RC(höher) ausgestattet und die funktionieren alle, kann auch was anderes sein bzw. evtl auch ein blöder Zufall, hast du ein BIOS update gemacht oder dergleichen? Ich würde nicht gleich wieder zurück auf 6.9.2 sondern die Ursache suchen. Ich vermute hier eher das der Stick defekt ist oder etwas mit VFIO nicht passt. Nur so als Hinweis: Normalerweise geht das bei Update in der GUI, dort kannst du wieder downgraden. Du kannst dir immer die zip Datei von 6.9.2 laden und alle bz* Dateien auf deinem USB Stick mit denen von der zip Datei ersetzen, dann bist du wieder auf 6.9.2.

Kannst du evtl ein paar mehr Infos springen lassen? Wenn möglich auch deine Diagnostics? Lastet er dein system dauerhaft aus oder nur beim kopieren? Hast du den VM Dienst an bzw. eine VM an? "loop2" ist normalerweise das libvirt image das für deine VMs zuständig ist.

I don't understand... I'm really not familiar with ARK but maybe this helps: Click Form what I've read there: Edit the file 'GameUserSettings.ini' and append for example this: 'ActiveMapMod=1065443232' In the Docker template at 'Map' enter the map name, like in this example: 'Panthalassa' Restart the container It should then download and install the map.

Yep, can imagine that this is a thing because you got '/' (slashes) in there and the plugin can't handle them if you want to remove it, will fix this in an upcoming version from the plugin. It would be also possible to remove the config from the settings file too, but a removal and new installation from the plugin will also do the job.

It seems to me that this is only the output from the plugin installation log after the daemon is started. You've entered 'http://172.16.0.54/' please type in only the IP from the Target and don't use http, please look again at the first post.

Exactly. I don't think so because it does nothing to the default output from your iGPU.

Yes, that's possible as long as your CPU is any from 5th to 10th gen. But keep in mind you won't get a display output from your iGPU the plugin only accelerates the applications in the VM and enable 3D so you can stream it via Parsec or something similar (video playback will also be accelerated so you will actually save power too if it's done over the iGPU).