lordbob75

Will test again when I get home, but I had cleared the cache, it worked, then next time I opened it, it wasn't working. Clearing the cache again fixed it until the next time I opened it. Not sure if it was the next day or whatever though.

Windows 10, Version 63.0.3239.84 (Official Build) (64-bit) Does not work in chrome on my android either, although it connects, just doesn't load anything aside from the top menu bar.

192.168.1.3-1513737100435.log

Log for_ CrashPlanPRO.html

Yup, and still occurring (just tested). Using Chrome. Can try another later tonight.

Well it does fix it, but this keeps happening. Tried to open the ui again and now it's disconnected again. Would prefer not to have to clear the cache everytime I need to check on it.

Clearing the cache did it. Thanks mate.

Ah, duh. Attached below. So I've reinstalled the container with nothing else (except some plugins) installed, and the same thing happens. Log for_ CrashPlanPRO.html

Good morning, I've been having some weird slowdowns on my GUI and after a bunch of testing and rebuilding my flash drive, it appears that it's this plugin (preclear) causing this issue. Specifically, the main issue is that when I have the plugin installed, the installation of apps hangs with no updating until the installation is complete. Chrome reports the tab as unresponsive and nothing besides the banner and top menu load. If I remove the plugin, it works normally with no issue. Not sure why this is happening but I would be happy to help fix this.

How do I get those? If I still have them I will post, but working on rebuilding the usb drive right now.

Today I'm unable to vnc into the crashplan container. Getting a "Server Disconnected: Code 1006" error. Restarting has no effect. Will be attempting a server reboot, but that's not something I want to have to do to fix this. Edit: Reboot did not help. Will be rebuilding the flash drive tomorrow, perhaps that will fix it.

Would love to play around with this but I can't seem to get either of the containers to install. The mail server complains about let's encrypt (which I don't currently use), and the admin one complains about invalid hostnames and IPs. Can you provide any assistance?

OK, I'll give this a shot in the morning then. Thanks!

Would be cool, yea. So I removed the dynamix one and it seems to stay up now. However it flat out does not appear on certain pages, such as the main page and stats, although it works fine in the dashboard. Maybe it's set to not display on those? Seems odd.

What version of unRAID? What sensors do you have set to show? Do you have the dynamix temp plugin installed? 6.3.5, set to show 4 of the working sensors. It works when I first set it. I do have the dynamix temp plugin, so that's probably why. Will test and report back.

This definitely seemed to be the issue. Removed and reinstalled it and it works fine aside from the footers not staying visible.

You mentioned earlier you were manually editing the config file. If you have a bad config or the settings are wrong it could lag the webgui. There would be a timeout for every ipmi command run. I would delete the ipmi plugin directory on the flash drive and start from scratch. You could try running ipmisensors from the command line and see if there's an error. Huh, interesting. I will attempt this. Still wish I could get an accurate temp reading from it though. Also, is there a way to turn off the sensor display on the dashboard homepage? Edit: Also the footer readings do not appear to stay on the gui, they display for a few seconds after the page loads, then disappears. Edit2: Oh, removing all dashboard display sensors makes it go away from the dashboard. Thought that left it up but blank.

@dmacias I discovered that your plugin was causing massive lag on my webgui. I've removed it and the lag went away instantly. Not sure what's going on here but would be happy to help diagnose a fix. Edit: posted accidentally before I wrote anything...

Well the script doesn't poll the data, it uses your plugin to do so, then just sends it to infulxdb. It looks like the Temp is pulling the Inlet Temp instead, but not sure why since I can pull inlet temp with inlet temp too...

No problem. I installed your plugin and get readings right off the bat. When I go to the Readings page, sort by name, there are 2 sensors named Temp, with nothing to distinguish the two. Turning on advanced view will show the IDs, and they are 115 and 116. 115 appears to be my cpu temp (that the dynamix temp plugin grabs), whereas 116 does not appear to have any reading. I have a script running on UnRAID (through the user scripts plugin) called IPMI that ports that data to my influxdb container. I then use Grafana to display the data stored in the database. When I set grafana to display the Temp value (from the unraid ipmi data), it displays as 23C. When I look on the Readings page, one Temp is 42 and the other is N/A.

Hey I'm loving this plugin so far, but I'm having trouble with the temp reading. There appear to be 2 items with the exact same name (115 and 116), and I'm using a script to pull the IPMI data to influxdb to grafana, where it seems to be pulling the wrong temp (22c vs 42c reported in unraid). The 2nd temp item was showing at that temp earlier (though not now) so I think the script is pulling the wrong temp item. I can't get it to pull the right one since I can't seem to edit the config file, or the changes just have no effect. Tried renaming the 2nd temp, tried removing it, tried using 115_Temp instead, but it just seems to ignore every change to the config file, even when the config editor shows the correct config edits. Can you provide any assistance?

You realize it's way more likely they would try to hack the server/app than your VPN, right? Why can't you setup a VPN? That is the correct way to use this app remotely. If you have to have the webgui accessible remotely but refuse a vpn then your only real option is opening the gui to the internet. @jbrodriguez, great app, I love it. Don't need to use it too often but it's easier to use than the webgui on my cellphone.

Hey forgot to reply earlier. I deleted the appdata folder for crashplan in appdata and restarted it. Works fine now, although it's still syncing up so I haven't actually been able to continue yet.

I appreciate the look anyways. I'll try clearing the appdata (after I back it up) and then if that doesn't work I'll contact code42. Thanks!

It takes 5-10 seconds after clicking login before it gives the error service.log.zip