Ryonez

Earlier todya while I was watching something with the misses, the Plex streams stopped. Looking at the server, I found about 85% of my dockers where offline. Looking at the log, I saw a whole lot of BTRFS errors. I had a file integrity scan happening on disk 3, nothing that should have impacted the cache. I unmounted the array, then rebooted the server. When it came back up, the cache device was gone. This has happened once before, resetting the cable fixed it. I checked the cable, started it back up again, and the cache was still missing. It was then I noticed it sitting it the unassigned devices section. It looks like the fs is visable, I'm going to see if I can mount it. Can someone please tell me wtf happened? Diagnostics attached. I need to get that cache mounted where it should be. atlantis-diagnostics-20180812-1802_Anonymized.zip

Yup, something to do with starting up. 125 errors, all torrents with tracking errors, including those that had started to work again before restarting the docker container.

No. Though it seems some are responding now. They were working before I restarted the docker hours ago, I'll see if restarting it again drops them off again.

I've got this happening on all of my torrents, it's not just one tracker affected. This could be a problem...

Has something happened in the last update? All of the torrents trackers are no longer responding. Tried switching the vpn to a different endpoint, put no dice.

Upgraded from 6.5.1 to 6.5.2 as well, seems to have gone smoothly.

Just finished on my end, preclear successful. Thank you for fixing it up.

Great to hear. I'll stop the preclear I'm doing with the other script and use this. I'll verify if it works my end.

Not sure how it's unsafe. The drive has completed two full reads successfully. So no bad sectors. The writing worked, thought the other script seems to missed someplace as part of the the script, not the hdd, which caused the post-read to fail. The reason the ppre-read takes so long is to add stress to the drive to see if it fails isn't it? The hdd has already had two full-reads, and two full writes, so I'm not sure where the risk is in skipping the pre-read and speeding up the post-read. At this point I don't see how increasing the time would increase the safety.

Great, so I don't need to specify the starting sector. I'll be using the -W flag to skip the pre-read, the drive has completed that twice successfully with the other script. I am looking at using the -f flag for fast post-read, as the normal post-read is designed to test the hdd as well. This drive has already gone through two full reads and two, mostly full? writes with gfjardim's script. I should be alright with the fast post-read, yes?

Okay, I've had a quick look at the script, I'm just worried what values I should use for the starting sector.

No, I've been using gfjardim's. Not sure where to install and how use BJP's.

But binhex suggests using gfjardim's atm. Isn't that not working though, or is there a patch for that? I've started looking through the forums after the second Post-Read fail, and am having trouble piecing together what's happening and what's working.

There isn't an issue with them: I tested it with the tools on poste.io's site, and can see them passing in the email headers.

It says it's found a DNS record. Why do you ask?

Alright, figured out my problem. I use a Fritzbox that had locked down outgoing port 25 connections. I shifted it into to normal access rules and made an exception for the server. SPF and DKIM all set up, test emails are going, seems like it's good!

Yeah, this is starting to get annoying I think I have everything set up, I can receive email, I just can't send. Seriously, nothing sends. It all ends up in a queue and I don't know why it won't send. And the logs don't seem to give any clue. IT just shows them being added to the queue and then... nothing. Doesn't seem to be any attempt to send. Any suggestions?

Got sick of waiting, switch to Netherlands and it's working. Seems just Sweden is down.

Hmm. I'll just be patient for now. Thank you for the help.

That link leads to your DelugeVPN thread, but not to any post. But, I get that it's on PIA's side. Is this something that can be solved by changing the openvpn cert to use a different point, or is it just stuck altogether until the API is fixed?

Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-03-21 07:22:54.752017 [info] Host is running unRAID 2018-03-21 07:22:54.849874 [info] System information Linux 1d059c09da7d 4.14.26-unRAID #1 SMP PREEMPT Mon Mar 12 16:21:20 PDT 2018 x86_64 GNU/Linux 2018-03-21 07:22:55.383572 [info] PUID defined as '99' 2018-03-21 07:22:55.678955 [info] PGID defined as '100' 2018-03-21 07:22:56.688358 [info] UMASK defined as '000' 2018-03-21 07:22:56.728755 [info] Permissions already set for volume mappings 2018-03-21 07:22:56.826530 [info] VPN_ENABLED defined as 'yes' 2018-03-21 07:22:57.348865 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/Sweden.ovpn dos2unix: converting file /config/openvpn/Sweden.ovpn to Unix format... 2018-03-21 07:22:57.594015 [info] VPN remote line defined as 'remote sweden.privateinternetaccess.com 502' 2018-03-21 07:22:57.640991 [info] VPN_REMOTE defined as 'sweden.privateinternetaccess.com' 2018-03-21 07:22:57.687499 [info] VPN_PORT defined as '502' 2018-03-21 07:22:57.730230 [info] VPN_PROTOCOL defined as 'tcp-client' 2018-03-21 07:22:57.766712 [info] VPN_DEVICE_TYPE defined as 'tun0' 2018-03-21 07:22:57.806674 [info] VPN_PROV defined as 'pia' 2018-03-21 07:22:57.846117 [info] LAN_NETWORK defined as '10.1.1.0/24' 2018-03-21 07:22:57.884107 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,8.8.8.8,209.222.18.218,37.235.1.177,8.8.4.4' 2018-03-21 07:22:57.932282 [info] VPN_USER defined as 'XXXXX' 2018-03-21 07:22:57.970247 [info] VPN_PASS defined as 'XXXXX' 2018-03-21 07:22:58.006010 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2018-03-21 07:22:58.040830 [info] STRICT_PORT_FORWARD defined as 'yes' 2018-03-21 07:22:58.076367 [info] ENABLE_PRIVOXY defined as 'no' 2018-03-21 07:22:58.111773 [info] ENABLE_FLOOD defined as 'no' 2018-03-21 07:22:58.147791 [info] ENABLE_AUTODL_IRSSI defined as 'no' chsh: Shell not changed. Changing shell for nobody. 2018-03-21 07:23:02.654809 [info] Starting Supervisor... 2018-03-21 07:23:06,722 CRIT Set uid to user 0 2018-03-21 07:23:06,722 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing 2018-03-21 07:23:06,773 INFO supervisord started with pid 7 2018-03-21 07:23:07,775 INFO spawned: 'start-script' with pid 145 2018-03-21 07:23:07,777 INFO spawned: 'rutorrent-script' with pid 146 2018-03-21 07:23:07,779 INFO spawned: 'flood-script' with pid 147 2018-03-21 07:23:07,781 INFO spawned: 'irssi-script' with pid 148 2018-03-21 07:23:07,783 INFO spawned: 'rtorrent-script' with pid 149 2018-03-21 07:23:07,786 INFO spawned: 'privoxy-script' with pid 150 2018-03-21 07:23:07,786 INFO reaped unknown pid 8 2018-03-21 07:23:07,787 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN [debug] Environment variables defined as follows BASH=/bin/bash BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/root/start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="12" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu") BASH_VERSION='4.4.12(1)-release' DEBUG=true DIRSTACK=() ENABLE_AUTODL_IRSSI=no ENABLE_FLOOD=no ENABLE_PRIVOXY=no EUID=0 GROUPS=() HOME=/home/nobody HOSTNAME=1d059c09da7d HOSTTYPE=x86_64 HOST_OS=unRAID IFS=$' \t\n' LANG=en_GB.UTF-8 LAN_NETWORK=10.1.1.0/24 MACHTYPE=x86_64-unknown-linux-gnu NAME_SERVERS=209.222.18.222,37.235.1.174,8.8.8.8,209.222.18.218,37.235.1.177,8.8.4.4 OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PGID=100 PHP_TZ=Pacific/Auckland PIPESTATUS=([0]="0") PPID=7 PS4='+ ' PUID=99 PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=1 STRICT_PORT_FORWARD=yes SUPERVISOR_ENABLED=1 SUPERVISOR_GROUP_NAME=start-script SUPERVISOR_PROCESS_NAME=start-script TERM=xterm TZ=Pacific/Auckland UID=0 UMASK=000 VPN_CONFIG=/config/openvpn/Sweden.ovpn VPN_DEVICE_TYPE=tun0 VPN_ENABLED=yes VPN_OPTIONS= VPN_PASS=XXXXX VPN_PORT=502 VPN_PROTOCOL=tcp-client VPN_PROV=pia VPN_REMOTE=sweden.privateinternetaccess.com VPN_USER=XXXXX _='[debug] Environment variables defined as follows' [debug] Directory listing of files in /config/openvpn as follows 2018-03-21 07:23:07,787 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,787 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,787 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,788 INFO success: irssi-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,788 INFO success: rtorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,788 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-03-21 07:23:07,790 DEBG 'flood-script' stdout output: [info] Flood not enabled, skipping starting Flood Web UI 2018-03-21 07:23:07,791 DEBG fd 17 closed, stopped monitoring <POutputDispatcher at 22465057618760 for <Subprocess at 22465048054528 with name flood-script in state RUNNING> (stdout)> 2018-03-21 07:23:07,791 DEBG fd 21 closed, stopped monitoring <POutputDispatcher at 22465048014792 for <Subprocess at 22465048054528 with name flood-script in state RUNNING> (stderr)> 2018-03-21 07:23:07,791 INFO exited: flood-script (exit status 0; expected) 2018-03-21 07:23:07,791 DEBG received SIGCLD indicating a child quit 2018-03-21 07:23:07,792 DEBG 'irssi-script' stdout output: [info] Autodl-irssi not enabled, skipping startup 2018-03-21 07:23:07,792 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 22465048013496 for <Subprocess at 22465048054384 with name irssi-script in state RUNNING> (stderr)> 2018-03-21 07:23:07,792 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 22465048014432 for <Subprocess at 22465048054384 with name irssi-script in state RUNNING> (stdout)> 2018-03-21 07:23:07,793 INFO exited: irssi-script (exit status 0; expected) 2018-03-21 07:23:07,793 DEBG received SIGCLD indicating a child quit 2018-03-21 07:23:07,795 DEBG 'privoxy-script' stdout output: [info] Privoxy set to disabled 2018-03-21 07:23:07,795 DEBG fd 32 closed, stopped monitoring <POutputDispatcher at 22465048102456 for <Subprocess at 22465048054168 with name privoxy-script in state RUNNING> (stdout)> 2018-03-21 07:23:07,796 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 22465048102888 for <Subprocess at 22465048054168 with name privoxy-script in state RUNNING> (stderr)> 2018-03-21 07:23:07,796 INFO exited: privoxy-script (exit status 0; expected) 2018-03-21 07:23:07,796 DEBG received SIGCLD indicating a child quit 2018-03-21 07:23:07,916 DEBG 'rtorrent-script' stdout output: [info] rTorrent config file already exists, skipping copy 2018-03-21 07:23:08,014 DEBG 'rtorrent-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-03-21 07:23:08,014 DEBG 'rtorrent-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-03-21 07:23:08,020 DEBG 'start-script' stdout output: total 16 drwxrwxr-x 1 nobody users 116 Mar 21 07:22 . drwxrwxr-x 1 nobody users 193 Mar 21 07:22 .. -rwxrwxr-x 1 nobody users 2025 Mar 14 11:20 ca.rsa.2048.crt -rwxrwxr-x 1 nobody users 20 Mar 21 03:30 credentials.conf -rwxrwxr-x 1 nobody users 869 Mar 14 11:20 crl.rsa.2048.pem -rwxrwxr-x 1 nobody users 287 Mar 21 07:22 Sweden.ovpn 2018-03-21 07:23:08,125 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/Sweden.ovpn as follows... 2018-03-21 07:23:08,126 DEBG 'start-script' stdout output: remote sweden.privateinternetaccess.com 502 client dev tun proto tcp-client resolv-retry infinite nobind persist-key cipher aes-128-cbc auth sha1 tls-client remote-cert-tls server auth-user-pass credentials.conf comp-lzo verb 1 crl-verify crl.rsa.2048.pem ca ca.rsa.2048.crt disable-occ 2018-03-21 07:23:08,338 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2018-03-21 07:23:08,342 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2018-03-21 07:23:08,346 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-03-21 07:23:08,349 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-03-21 07:23:08,352 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2018-03-21 07:23:08,356 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-03-21 07:23:08,360 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-03-21 07:23:12,113 DEBG 'start-script' stdout output: [info] Remote VPN endpoint resolves to the following A record(s)... 5.157.7.18 5.157.7.154 91.108.183.18 37.203.209.27 5.153.233.50 91.108.183.178 5.157.38.34 5.153.233.26 5.157.7.42 5.157.38.18 91.108.183.186 5.157.7.10 5.153.234.58 2018-03-21 07:23:12,400 DEBG 'start-script' stdout output: [debug] Show name servers defined for container 2018-03-21 07:23:12,401 DEBG 'start-script' stdout output: nameserver 209.222.18.222 nameserver 37.235.1.174 nameserver 8.8.8.8 nameserver 209.222.18.218 nameserver 37.235.1.177 nameserver 8.8.4.4 2018-03-21 07:23:12,401 DEBG 'start-script' stdout output: [debug] Show name resolution for VPN endpoint sweden.privateinternetaccess.com 2018-03-21 07:23:12,654 DEBG 'start-script' stdout output: ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 35678 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; sweden.privateinternetaccess.com. IN A ;; ANSWER SECTION: sweden.privateinternetaccess.com. 257 IN A 5.157.7.18 sweden.privateinternetaccess.com. 257 IN A 5.157.7.154 sweden.privateinternetaccess.com. 257 IN A 91.108.183.18 sweden.privateinternetaccess.com. 257 IN A 37.203.209.27 sweden.privateinternetaccess.com. 257 IN A 5.153.233.50 sweden.privateinternetaccess.com. 257 IN A 91.108.183.178 sweden.privateinternetaccess.com. 257 IN A 5.157.38.34 sweden.privateinternetaccess.com. 257 IN A 5.153.233.26 sweden.privateinternetaccess.com. 257 IN A 5.157.7.42 sweden.privateinternetaccess.com. 257 IN A 5.157.38.18 sweden.privateinternetaccess.com. 257 IN A 91.108.183.186 sweden.privateinternetaccess.com. 257 IN A 5.157.7.10 sweden.privateinternetaccess.com. 257 IN A 5.153.234.58 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 221 msec ;; SERVER: 209.222.18.218 ;; WHEN: Wed Mar 21 07:23:12 2018 ;; MSG SIZE rcvd: 258 2018-03-21 07:23:12,654 DEBG 'start-script' stdout output: [debug] Show contents of hosts file 2018-03-21 07:23:12,655 DEBG 'start-script' stdout output: 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters 172.17.0.5 1d059c09da7d 2018-03-21 07:23:12,659 DEBG 'start-script' stdout output: [info] Adding 10.1.1.0/24 as route via docker eth0 2018-03-21 07:23:12,660 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2018-03-21 07:23:12,661 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 10.1.1.0/24 via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.5 2018-03-21 07:23:12,661 DEBG 'start-script' stdout output: -------------------- [debug] Modules currently loaded for kernel 2018-03-21 07:23:12,663 DEBG 'start-script' stdout output: Module Size Used by xt_nat 16384 14 veth 16384 0 xt_CHECKSUM 16384 1 iptable_mangle 16384 1 ipt_REJECT 16384 2 nf_reject_ipv4 16384 1 ipt_REJECT ebtable_filter 16384 0 ebtables 32768 1 ebtable_filter ip6table_filter 16384 0 ip6_tables 24576 1 ip6table_filter vhost_net 20480 0 tun 32768 4 vhost_net vhost 32768 1 vhost_net tap 20480 1 vhost_net ipt_MASQUERADE 16384 14 nf_nat_masquerade_ipv4 16384 1 ipt_MASQUERADE iptable_nat 16384 1 nf_conntrack_ipv4 16384 39 nf_defrag_ipv4 16384 1 nf_conntrack_ipv4 nf_nat_ipv4 16384 1 iptable_nat iptable_filter 16384 1 ip_tables 24576 3 iptable_mangle,iptable_filter,iptable_nat nf_nat 24576 3 xt_nat,nf_nat_masquerade_ipv4,nf_nat_ipv4 xfs 626688 3 dm_crypt 36864 3 ecb 16384 6 crypto_simd 16384 0 glue_helper 16384 0 cryptd 20480 1 crypto_simd aes_x86_64 20480 6 xts 16384 3 algif_skcipher 16384 0 af_alg 20480 1 algif_skcipher dm_mod 106496 7 dm_crypt dax 20480 1 dm_mod md_mod 49152 3 bonding 110592 0 intel_powerclamp 16384 0 coretemp 16384 0 kvm_intel 192512 0 kvm 339968 1 kvm_intel crc32c_intel 24576 0 intel_cstate 16384 0 intel_uncore 98304 0 i7core_edac 24576 0 e1000e 172032 0 i2c_i801 24576 0 i2c_core 36864 1 i2c_i801 pata_marvell 16384 0 mxm_wmi 16384 0 i5500_temp 16384 0 ahci 36864 4 libahci 28672 1 ahci ptp 20480 1 e1000e wmi 20480 1 mxm_wmi pps_core 16384 1 ptp button 16384 0 acpi_cpufreq 16384 0 2018-03-21 07:23:12,667 DEBG 'start-script' stdout output: iptable_mangle 16384 1 ip_tables 24576 3 iptable_mangle,iptable_filter,iptable_nat 2018-03-21 07:23:12,667 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2018-03-21 07:23:12,676 DEBG 'start-script' stdout output: [debug] Docker interface defined as eth0 2018-03-21 07:23:12,680 DEBG 'start-script' stdout output: [debug] Docker IP defined as 172.17.0.5 2018-03-21 07:23:12,683 DEBG 'start-script' stdout output: [debug] Docker netmask defined as 255.255.0.0 2018-03-21 07:23:12,726 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2018-03-21 07:23:13,470 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2018-03-21 07:23:13,472 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 502 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A INPUT -s 10.1.1.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 502 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT -A OUTPUT -d 10.1.1.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2018-03-21 07:23:13,472 DEBG 'start-script' stdout output: -------------------- 2018-03-21 07:23:13,473 DEBG 'start-script' stdout output: [debug] OpenVPN command line:- /usr/bin/openvpn --daemon --reneg-sec 0 --mute-replay-warnings --auth-nocache --setenv VPN_PROV 'pia' --setenv DEBUG 'true' --setenv VPN_DEVICE_TYPE 'tun0' --setenv VPN_REMOTE 'sweden.privateinternetaccess.com' --script-security 2 --up /root/openvpnup.sh --up-delay --up-restart --writepid /root/openvpn.pid --remap-usr1 SIGHUP --log-append /dev/stdout --pull-filter ignore 'up' --pull-filter ignore 'down' --pull-filter ignore 'route-ipv6' --pull-filter ignore 'ifconfig-ipv6' --pull-filter ignore 'tun-ipv6' --pull-filter ignore 'persist-tun' --pull-filter ignore 'reneg-sec' --remote 5.157.7.18 502 tcp-client --remote 5.157.7.154 502 tcp-client --remote 91.108.183.18 502 tcp-client --remote 37.203.209.27 502 tcp-client --remote 5.153.233.50 502 tcp-client --remote 91.108.183.178 502 tcp-client --remote 5.157.38.34 502 tcp-client --remote 5.153.233.26 502 tcp-client --remote 5.157.7.42 502 tcp-client --remote 5.157.38.18 502 tcp-client --remote 91.108.183.186 502 tcp-client --remote 5.157.7.10 502 tcp-client --remote 5.153.234.58 502 tcp-client --keepalive 10 60 --setenv STRICT_PORT_FORWARD 'yes' --disable-occ --auth-user-pass credentials.conf --cd /config/openvpn --config '/config/openvpn/Sweden.ovpn' [info] Starting OpenVPN... 2018-03-21 07:23:14,245 DEBG 'start-script' stdout output: Wed Mar 21 07:23:14 2018 WARNING: file 'credentials.conf' is group or others accessible Wed Mar 21 07:23:14 2018 OpenVPN 2.4.4 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Sep 26 2017 Wed Mar 21 07:23:14 2018 library versions: OpenSSL 1.1.0f 25 May 2017, LZO 2.10 2018-03-21 07:23:14,246 DEBG 'start-script' stdout output: [info] OpenVPN started 2018-03-21 07:23:14,246 DEBG 'start-script' stdout output: Wed Mar 21 07:23:14 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts [debug] Waiting for valid IP address from tunnel... 2018-03-21 07:23:14,262 DEBG 'start-script' stdout output: Wed Mar 21 07:23:14 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]5.157.7.18:502 Wed Mar 21 07:23:14 2018 Attempting to establish TCP connection with [AF_INET]5.157.7.18:502 [nonblock] 2018-03-21 07:23:15,262 DEBG 'start-script' stdout output: Wed Mar 21 07:23:15 2018 TCP connection established with [AF_INET]5.157.7.18:502 Wed Mar 21 07:23:15 2018 TCP_CLIENT link local: (not bound) Wed Mar 21 07:23:15 2018 TCP_CLIENT link remote: [AF_INET]5.157.7.18:502 2018-03-21 07:23:17,685 DEBG 'start-script' stdout output: Wed Mar 21 07:23:17 2018 [4524293204c99fb7603f2eb30135e3fc] Peer Connection Initiated with [AF_INET]5.157.7.18:502 2018-03-21 07:23:19,557 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 auth-token received, disabling auth-nocache for the authentication token 2018-03-21 07:23:19,558 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 TUN/TAP device tun0 opened 2018-03-21 07:23:19,558 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 do_ifconfig, tt->did_ifconfig_ipv6_setup=0 Wed Mar 21 07:23:19 2018 /usr/bin/ip link set dev tun0 up mtu 1500 2018-03-21 07:23:19,559 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 /usr/bin/ip addr add dev tun0 local 10.40.1.6 peer 10.40.1.5 2018-03-21 07:23:19,560 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 /root/openvpnup.sh tun0 1500 1560 10.40.1.6 10.40.1.5 init 2018-03-21 07:23:19,567 DEBG 'start-script' stdout output: Wed Mar 21 07:23:19 2018 Initialization Sequence Completed 2018-03-21 07:23:19,600 DEBG 'start-script' stdout output: [debug] Valid IP address from tunnel acquired '10.40.1.6' 2018-03-21 07:23:19,610 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-03-21 07:23:19,611 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-03-21 07:23:19,639 DEBG 'rtorrent-script' stdout output: [debug] Valid IP address from tunnel acquired '10.40.1.6' 2018-03-21 07:23:19,643 DEBG 'rtorrent-script' stdout output: [info] rTorrent not running [info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.40.1.6 different, marking for reconfigure 2018-03-21 07:23:19,721 DEBG 'start-script' stdout output: [debug] Valid IP address from tunnel acquired '10.40.1.6' 2018-03-21 07:23:19,722 DEBG 'start-script' stdout output: [debug] Valid IP address from tunnel acquired '10.40.1.6' [debug] Attempting to get external IP using Name Server 'ns1.google.com'... 2018-03-21 07:23:19,722 DEBG 'start-script' stdout output: [info] Strict port forwarding enabled, attempting to assign an incoming port... 2018-03-21 07:23:20,057 DEBG 'start-script' stdout output: [info] Attempting to curl http://209.222.18.222:2000/?client_id=ecXXXXXc... 2018-03-21 07:23:20,697 DEBG 'start-script' stdout output: [info] Successfully retrieved external IP address 5.157.7.19 2018-03-21 07:23:20,756 DEBG 'rtorrent-script' stdout output: [debug] External IP address from tunnel is '5.157.7.19' 2018-03-21 07:23:20,757 DEBG 'rtorrent-script' stdout output: [debug] Waiting for file '/home/nobody/vpn_incoming_port.txt' to be generated (contains PIA API generated incoming port number)... 2018-03-21 07:23:21,021 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 12 retries left [info] Retrying in 10 secs... 2018-03-21 07:23:31,361 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 11 retries left [info] Retrying in 10 secs... 2018-03-21 07:23:41,772 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 10 retries left [info] Retrying in 10 secs... 2018-03-21 07:23:52,113 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 9 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:02,452 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 8 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:13,124 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 7 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:23,469 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 6 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:34,102 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 5 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:44,442 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 4 retries left [info] Retrying in 10 secs... 2018-03-21 07:24:50,558 WARN received SIGTERM indicating exit request 2018-03-21 07:24:50,559 INFO waiting for start-script, rutorrent-script, rtorrent-script to die 2018-03-21 07:24:51,560 DEBG killing rtorrent-script (pid 149) with signal SIGTERM 2018-03-21 07:24:51,561 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 22465048011696 for <Subprocess at 22465048053952 with name rtorrent-script in state STOPPING> (stdout)> 2018-03-21 07:24:51,561 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 22465048011408 for <Subprocess at 22465048053952 with name rtorrent-script in state STOPPING> (stderr)> 2018-03-21 07:24:51,561 INFO stopped: rtorrent-script (terminated by SIGTERM) 2018-03-21 07:24:51,561 DEBG received SIGCLD indicating a child quit 2018-03-21 07:24:52,563 DEBG killing rutorrent-script (pid 146) with signal SIGTERM 2018-03-21 07:24:52,563 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 22465048052440 for <Subprocess at 22465048052872 with name rutorrent-script in state STOPPING> (stdout)> 2018-03-21 07:24:52,563 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 22465048052152 for <Subprocess at 22465048052872 with name rutorrent-script in state STOPPING> (stderr)> 2018-03-21 07:24:52,564 INFO stopped: rutorrent-script (terminated by SIGTERM) 2018-03-21 07:24:52,564 DEBG received SIGCLD indicating a child quit 2018-03-21 07:24:52,564 DEBG killing start-script (pid 145) with signal SIGTERM 2018-03-21 07:24:52,565 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22465048053376 for <Subprocess at 22465048053592 with name start-script in state STOPPING> (stdout)> 2018-03-21 07:24:52,565 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22465048053088 for <Subprocess at 22465048053592 with name start-script in state STOPPING> (stderr)> 2018-03-21 07:24:52,565 INFO stopped: start-script (terminated by SIGTERM) 2018-03-21 07:24:52,565 DEBG received SIGCLD indicating a child quit There you go.

Hi, so I noticed earlier that my rtorrent docker has gone done. Looking at the logs, it seems it's having curl issues? 2018-03-20 07:46:16,258 DEBG 'start-script' stdout output: Tue Mar 20 07:46:16 2018 auth-token received, disabling auth-nocache for the authentication token 2018-03-20 07:46:16,258 DEBG 'start-script' stdout output: Tue Mar 20 07:46:16 2018 TUN/TAP device tun0 opened Tue Mar 20 07:46:16 2018 do_ifconfig, tt->did_ifconfig_ipv6_setup=0 Tue Mar 20 07:46:16 2018 /usr/bin/ip link set dev tun0 up mtu 1500 2018-03-20 07:46:16,260 DEBG 'start-script' stdout output: Tue Mar 20 07:46:16 2018 /usr/bin/ip addr add dev tun0 local 10.31.1.6 peer 10.31.1.5 2018-03-20 07:46:16,261 DEBG 'start-script' stdout output: Tue Mar 20 07:46:16 2018 /root/openvpnup.sh tun0 1500 1560 10.31.1.6 10.31.1.5 init 2018-03-20 07:46:16,268 DEBG 'start-script' stdout output: Tue Mar 20 07:46:16 2018 Initialization Sequence Completed 2018-03-20 07:46:16,294 DEBG 'rtorrent-script' stdout output: [info] rTorrent not running [info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.31.1.6 different, marking for reconfigure 2018-03-20 07:46:16,430 DEBG 'start-script' stdout output: [info] Attempting to curl http://209.222.18.222:2000/?client_id=XXXXXXX... 2018-03-20 07:46:16,964 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 12 retries left 2018-03-20 07:46:16,965 DEBG 'start-script' stdout output: [info] Retrying in 10 secs... 2018-03-20 07:46:17,695 DEBG 'start-script' stdout output: [info] Successfully retrieved external IP address 5.157.7.179 2018-03-20 07:46:27,630 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 11 retries left [info] Retrying in 10 secs... 2018-03-20 07:46:38,297 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 10 retries left [info] Retrying in 10 secs... 2018-03-20 07:46:48,634 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 9 retries left [info] Retrying in 10 secs... 2018-03-20 07:46:58,970 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 8 retries left [info] Retrying in 10 secs... Any ideas what might be happening? I've already tried replacing the openvpn configs with freshly downloaded copies and my VPN credentials are valid. I'm also able to ping "209.222.18.222:2000".

Gotcha, thank you.

Any chance the webpage could be secured to require a login to access it please?

I am unable to open Recycle Bin's settings. The page is just blank, despite restarting and reinstalling the plugin. It's meant to be disabled atm as I'm shifting lots of files around, however I noticed the folders and found files within them that would seem to indicated that it's running. What are the suggestions for fixing this? (For now I'm uninstalling as I continue to shift files)