lukeoslavia

Yeah, the server appears in the server list and everything, that's not the issue. The issue is that the container will auto update the game server to the latest version, and they don't release the updates to Xbox as quickly as they can for steam, meaning every time there is an update, the server is inaccessible to Xbox clients. Is there no way you could add in an environment variable to target a manifest id / game version?

I am attempting to setup a server for the Xbox version of palworld, which is behind the steam version. Is it possible to set a server version in the container somehow? Currently the server is on v0.3.6.whatever and the Xbox version is 0.3.5.whatever

Hello, my server is running version 6.12.3. I have an array with parity and several drives. I also have a handful of pool/cache pools. For one of my pools im using an ssd with ZFS as a writecache for media files. The share is set to use the Writecache as its primary storage and the array as secondary storage. When I write files to the share, the write speeds are very slow usually around 4 MB/s sometimes it gets up to ~35 MB/s but thats as fast as Ive seen it go. On other cache only pools using ZFS and BTRFS the write speed is as fast as I can send it via ethernet (115 MB/s). Is there perhaps some new configuration needed for using a write cache in unraid 6.12? or maybe I have just configured something wrong. I am attaching a picture of my share settings and any help would be appreciated.

I am trying to run this on docker desktop. With openvpn I can connect fine, but when I try to use wireguard I get this same series of messages repeating. I have tried the default config that gets generated and I made my own with hsand/pia-wg generator but I get the same result either way. Is there something I am not configuring properly?

I am trying to setup SMB multichannel, potentially with RSS as well, between my unraid NAS and my windows server 2022. I have tried several configurations but I just cannot seem to get a connection to the unraid share with multichannel. Both machines are DL360 Gen9's. The nas has 64gb ram and the windows machine 192gb ram and the processors are different models, but other than that specs are equal. Unraid is version 6.12.2. What I've tried so far: Windows configuration: 4x 1gbe ports in a NIC team (LACP / 802.3ad) Verified multichannel is enabled Verified the nic team has RSS enabled Checked that the interface throughput is 4gbps Ignore the first result, I disabled and re-enabled RSS as an attempted fix... Unraid config: I have tried all 4 of the ethernet ports separated and then added to the SMB extra commands: server multi channel support = yes aio read size = 1 aio write size = 1 interfaces = "10.10.30.1;capability=RSS,speed=1000000000" "10.10.30.2;capability=RSS,speed=1000000000" "10.10.30.3;capability=RSS,speed=1000000000" "10.10.30.4;capability=RSS,speed=1000000000" This didn't work, I got no additional throughput and wasn't able to copy multiple items at 1gbps even. I tried also just enabling Multichannel in the smb settings dropdown without any additional config with the same result. Current and closet to a good result config: SMB multichannel enabled in the smb settings dropdown. All 4 ethernet ports in an 802.3ad bond (LACP / Mode 4) With this setting I cannot get a multichannel SMB copy, but I installed the openspeedtest docker to test throughout the process and with this configuration I am getting 1gbps download speed and 3 - 3.5gbps upload. Super odd that it isn't full duplex this way!? This is where I currently am. I am not sure if multichannel is not currently working in unraid, or if I am configuring something wrong, but if anyone could help me get this going better I would greatly appreciate it!

Last week I switched over my NAS from a custom built AMD computer to a DL360 gen9. Since the switch I have added a disc shelf and raid card and changed the gpu to a low profile card. Every 1-3 days so far I randomly see my docker containers stop working and when I can load the docker page none of the containers appear. I was lucky enough to see the syslog this time when it occured though. When I set it to errors only I see this: Jul 4 10:37:07 NAS kernel: CPU: 6 PID: 56221 Comm: ffmpeg Tainted: P W O 6.1.36-Unraid #1 Jul 4 10:37:07 NAS kernel: Call Trace: Jul 4 10:37:09 NAS kernel: CPU: 49 PID: 56430 Comm: nvidia-smi Tainted: P D W O 6.1.36-Unraid #1 Jul 4 10:37:09 NAS kernel: Call Trace: Jul 4 10:38:10 NAS kernel: CPU: 2 PID: 56460 Comm: nvidia-smi Tainted: P D W O 6.1.36-Unraid #1 Jul 4 10:38:10 NAS kernel: Call Trace: Jul 4 10:41:10 NAS kernel: CPU: 2 PID: 56460 Comm: nvidia-smi Tainted: P D W O 6.1.36-Unraid #1 Jul 4 10:41:10 NAS kernel: Call Trace: Jul 4 10:44:10 NAS kernel: CPU: 2 PID: 56460 Comm: nvidia-smi Tainted: P D W O 6.1.36-Unraid #1 Jul 4 10:44:10 NAS kernel: Call Trace: There are stack traces in the full log as well, but im wondering if this means there is something wrong with the gpu im using or maybe the driver plugin?

it does not seem to, I have paths set for movies and tv separately, but the transcoding files are on a separate ssd. I honestly never think to use a script for pretty much anything, but I will give this a shot. I will probably have to modify it a bit to accommodate sporting events. Thanks for the tip!

I would love to have these large files eliminated so I can use ram as the transcode disk, but like you said, they seem to be intentionally created. I requested a feature to turn off "time-shift" on their forums to which they replied, we have part of the functionality now, and then closed it lol. My main problem with the large files is that they never get deleted unless I restart the emby server (even when properly closed), which doesn't happen in windows.

Have you tested this with live tv? Mine seems to transcode tv into one massive file, Ive had sporting events become 140gb on my ssd.

@ich777 I have an arc a380 and would like to test it with emby. Could I get the details on your custom build with 6.0.1?

Hello, as of yesterday the container doesn't seem to be starting up privoxy. Everything else seems fine, but the portion of the logs during start up that used to say Privoxy is listening on port 8118 no longer appears. Has there been a recent change that might have broken that part of the container? If so, is there a version I should rollback to?

You are correct, I updated last night, and when it booted back up, they were working again.

Just an update, plugged in a dual port pcie network adapter (intel something or other) and thats working. Not sure why the 4 port on board ports wont work with this unraid instance, but I had a trial usb stick going on the server before to verify I wanted to use this server for unraid, and the 4 ports worked then. either way, I can use my unraid server again, but id like to know why the onboard nics wont grab an ipaddress.

I did get an error when dumping the diagnostic, which seemed to be related to time zone. Im not sure if that could have anything to do with it, but the Date Modified time stamp for the diagnostic file on the flash drive is marked 1 am tomorrow.

Hello, Today I moved all of my drives to a different server and when I boot up the new server it will not get an ipv4 or ipv6 address(don't really want v6). I made a backup of my flash before the move and the first thing I tried was to delete the network.cfg and network-rules.cfg files, since that has saved the day before, however, these files are not on the drive, or the backup. I cannot seem to boot into the gui, but can get into the safe mode gui, but I still don't know what is stopping the networking. I would really like to save my array config as I have 24TB of data on the array. Any help would be appreciated! Thanks! casnas-diagnostics-20220707-2105.zip

Well, I left the puid and pgid alone, the default they were set to was: puid: 99 pgid: 100 but when I ran Id from the console, it said they were both 1000. I tried running chmod <PUID>:<PGID> -R /directus/uploads/ from the container, and then from unraid terminal with the host path. but it says chmod: invalid mode: '99:100' (I also tried 1000:1000 since thats what the container reported) the chown 755 -R /directus/uploads/ commands worked, but didnt seems to fix the issue.

Hello, I am having a couple of minor issues with the container, maybe permission related? When we try to upload any image (or file) we get the following error in the log: Error code: EACCES Original stack: Error: EACCES: permission denied, open '/directus/uploads/90e3355a-57c1-4807-9119-6319c0c54935.png' 08:00:04 ✨ request errored POST 503 /files 21ms I was hoping maybe you knew of a solution. Also, when I go to edit my admin account info, when the page opens, a dialog box pops up with : [FORBIDDEN] You don't have permission to access this.

Has there been any changes to the library monitor by chance? I added the new plugin to ignore recently modified files, but I've noticed that unmanic doesn't seem to watch the library any more. I set the scanner to ~200 and that is picking things up now, but if I turn that off and just use the Library monitor toggle, nothing seems to be getting added to the queue. Either way I've worked around it, just wondering if maybe something has changed in terms of watching the library.

I'm not certain but I don't think they have any suffix. But the plugin you mention sounds about like what I was saying. I know with MCEbuddy there was an option to wait until a file hasn't been modified for 1 minute and up to 60 days or something like that.

Feature suggestion: I was recording the formula 1 race this morning and UnManic detected the file, then began converting it before the race was finished recording. If the watcher can wait X amount of minutes since the file was last modified to add it to the queue, it should solve the problem. My (hopefully) short term fix is to not scan for an .ts files.

Out of curiosity, since there are now required plugins, will I need to be a patreon supporter to use unmanic? I ask because now it seems that in order to re-encode anything, you need a plugin like H265 NVENC / QSV / CPU or H264 NVENC / QSV / CPU. Also will it be possible to change the container to mp4? it seems like it is just defaulted to mkv now and I dont see any way to change that.

Its good to hear some of the plugins are going free, but I also second the removal of multi-language audio and subs. And to a lesser degree seeing the plugins first, but as you explained, that's not as big an issue. The re-order plugin seems to do its job just fine, but so far, for me anyway, emby still seems to pick a random language unless I set one on each individual player. That's fine and well for me, but for the rest of my family that doesn't really understand how it all works, it would be great to remove the extra steps for them once and never have to worry about it again. On the positive side though, your folder watch seems to work better than most of the other programs I've used, and the ease of use goes far beyond anything else so kudos there!

I did find that plugin, and it did work, but I decided just to go ahead and convert everything to MKV since I cant remove the audio files and subs. If that function becomes available I can definitely use it! but I'm also happy enough to just have everything copied over to the new format. The container is super easy to use once you figure out a few things, I just cant help but wonder how much space I could save by getting rid of extra audio tracks!

Have you got access to the plugins? There is one in there that will strip out the PNG stream that is causing the error with Unmanic So I went ahead and supported your patreon to get that plugin, but didnt see any plugins that could help me reduce the number of audio streams. Is there any current way I can do this. I would like to just pick a single English audio track, or even copy all english audio tracks, but remove any other languages.

I do not, when I click plugins, I get a patreon link . I was guessing that might be the error but really wasnt sure. I guess for now I will use MKV. Another question. I have files that have a lot of different audio streams, is it possible to just take 1 audio stream that matches a specified language?