Jump to content

Shomil Saini

Members
  • Content Count

    32
  • Joined

  • Last visited

Everything posted by Shomil Saini

  1. Hey @dorgan, Running 2020.07.23 and that issue is resolved. I see others were having this issue as well. So that should help them as well. My recommendation would be to keep Name & Status in one line and User & Time in next line for better readability purposes and that would also give enough room to display complete names instead of cutting them off. Thanks for the update though! Cheers! -Shomil Saini
  2. Hey @dorgan, Thanks for the update, Sorry I just saw your comment today after an update was pushed. Unfortunately the Dashboard Widget still is not in bounds of widget. Upon further Inspection, the widget is out of bounds on 3 column or 1 column layout width. On 2 column layout it is OK for the most part. Below are 2 screenshots for clarity. - 3-column layout - For 2 column layout wider than this the widget is OK. This is the boundary case. The Warning issue was actually not visible now on the NAVBAR page, so that may have fixed. Cheers on the good work!
  3. Hi @Ockingshay, Go to Settings > Network. This is the setting you might want to look into ๐Ÿ‘‡, please use your own network address range. This is my test server settings which work great. I am showing here as an example the VLAN range and Docker LAN range. Also, This๐Ÿ‘‡
  4. I am having the same error on the server - "ERROR: Could not open the input file (No such file or directory)". I have seen 9-10 times in quick succession. I am actually getting the error when plex is trying to ingest a newly imported file. like creating chapter thumbnails etc. I am guessing it is permission issue. I did run "New Docker Safe Permissions" lets see if that helps. My major concern though is that Remote streams are buffering @720P and @Direct Play-4k though I have bandwidth to upload and play @ 4K easily. This is not for every file so I am a bit relieved. Specifically issues is seen playing remote on Samsung TV QN65Q65FN - stream of 53.32GB source file H265 HDR-2160p TrueHD-Atmos 7.1. My best guess is that TV cannot handle H265 that well.
  5. Thanks for explaining guys. It makes much more sense to me now. I can understand the limitations of WireGuard. Cheers! ๐Ÿป
  6. Thanks @dorgan for the nice Plugin. I stumbled upon this looking for dashboard widgets. I do see an issue on the PLEX_STREAMS tab when I open the details by clicking on playing media name. Image๐Ÿ‘‡ Although below this the media info is still displayed. Not sure what is needed here. Also, using SSL seems a bit slower than otherwise. Also, the dashboard widget text goes outside the bounds. Image ๐Ÿ‘‡ Cheers!
  7. This works like a charm, just allocated 96g to /tmp/sab-ramdisk/ ๐Ÿ‘‡ You are the best, my friend @binhex! Stay Safe & Cheers! ๐Ÿป
  8. Thanks @ljm42, I completely understand your explanation. I think it is a wonderful add-on to have the widget on the Dashboard. To me however, what the more relevant question is "Which device is currently connected and since how long?" And a second follow up to that is "If a device is disconnected, then when was it last connected?" - this is partly vaguely answered by the current "Last Handshake Time" on Dashboard which is essentially last connection initiation time. If the Dashboard can be modified by me or developers to see this, then it will be more relevant, as I have provided access to friends & family as well. Cheers! and Be Safe.
  9. This seems to have worked! Can advise this to other with similar issue. Thanks and Stay Safe Everyone!
  10. Hey, I already did that, the same port was working beautifully for my regular spinning SATA drive. It is a R720xd Drive Bay on the back! Just Changed the settings to stop spin down. Will let you know if that works.
  11. Hi @binhex/@Squid, Thanks for both of yours' excellent work around the community. ๐Ÿ‘ I actually am running 128GB RAM in my R720xd. I have been able to use RAM as /tmp directory. Problem is I cannot download file larger than half the ram size - 61.6GB Free Space. I was looking at sabnzbd docs and internet, people have mentioned ArticleCache in (NZBget) setting to be a better way of doing this. Is there something similar for sabnzbd, as I do not see any setting in the container myself. Thanks in Advance. Cheers!
  12. Hi @dlandon - Thanks for the UD/UD+ Plugins. Need some help! I just installed 3 SSDs simultaneously to Unraid. - SanDisk z400s as cache drive that works good. - Also installed Samsung 960 pro nvme as Auto-Mount Unassigned Drive (plex_appdata) working ok upto now. - SSD with Issue: >>>Added Crucial MX500 1TB SSD as Auto-Mount Unassigned Drive (download folder) and after a few minutes it spins down and stops working and goes to Historical Drive after a few minutes.<<< Any pointers for me? Thanks in Advance. Cheers!
  13. Did you get any answer to this? I have same issue. If it is an issue that is. TIA!
  14. Hey @BRiT, Thanks for chiming in with your thoughts. No, not on my main server, but I believe Unraid-NVIDIA just adds the NVIDIA drivers on top of the Unraid builds. It does not alter the base Unraid OS files. But, I did check with it on a fresh separate installation with vanilla Unraid 6.8.0 and 6.7.2. Same result. Thanks, SS
  15. @itimpi, @limetech - Posting here as recommended. Also, new logs attached. I have had to restart once in the day today due to Drives being disconnected. Sorry about that. Since upgrading from version 6.6.6 (~110Mbps) to 6.7.2(~80Mbps) and now to 6.8.0(~20Mbps) the write speeds on transfers between internal drives have really gone to the gutter. Even after removing my parity drives the results are same. One file transfer halts the complete system and everything from UI to Dockers is unresponsive to the extent that I have to leave it for the transfer to complete. Plex stops streaming and starts screaming. I have no Idea, if someone has any clue please HELP! Also, same is true for transfers between my PC to Server over Gigabit LAN. No Shares have Cache enabled where the transfer are happening, there is no parity drives while I am struggling with this. Rest of the build is in my signature below. Thanks in Advance! -SS zeus-diagnostics-20191217-0055.zip
  16. I have been moving a few files from cache to drives after the reboot using Krusader, that is how I realized the issue and it has been a pain. This is just after the first reboot from upgrading to 6.8.0 couple of hours ago. I can send some logs your way tomorrow evening if you would be ok waiting. -Shomil
  17. @itimpi - Thanks for chiming in, here you go with the diagnostic zip. I hope this helps narrow down the issue. Thanks, Shomil zeus-diagnostics-20191216-0450.zip
  18. Since upgrading from version 6.6.6 (~110Mbps) to 6.7.2(~80Mbps) and now to 6.8.0(~20Mbps) the write speeds on transfers between internal drives have really gone to the gutter. Even after removing my parity drives the results are same. One file transfer halts the complete system and everything from UI to Dockers is unresponsive to the extent that I have to leave it for the transfer to complete. Plex stops streaming and starts screaming. I have no Idea, if someone has any clue please HELP! Also, same is true for transfers between my PC to Server over Gigabit LAN. No Shares have Cache enabled, there is no parity drives while I am struggling with this. Rest of the build is in my signature below. Thanks in Advance! -SS
  19. Thanks johnnie.black. I am tilting towards drive issue myself and would keep a close eye on the drive. Will update here when drive dies. For a 1Tb Toshiba Laptop drive, It has seen 31.75Tb Total lbas written and 29.5Tb Total lbas read so I am not sad to let it go. Thanks for helping. Cheers!
  20. Hi Johnnie.black, As promised, here is the report from today. Error count has gone up 2469362 again. This was a completely different computer, drive connected via SATA port on MOBO with fresh Unraid boot drive. I am a little happy that it is not a "cable, back-plane or controller problem" on my server. That would have been expensive lol. Any suggestions about the drive behavior? preclear_report_XXXXXXXXX_2019.12.14_17.00.09.txt ############################################################################################################################ # # # unRAID Server Preclear of disk XXXXXXXXX # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [3:03:48 @ 90 MB/s] SUCCESS # # Step 2 of 5 - Zeroing the disk: [3:02:30 @ 91 MB/s] SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 5 of 5 - Post-Read verification: [3:03:30 @ 90 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 9:09:51 | Total elapsed time: 9:09:51 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status (device type: default) # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 9002 9011 Up 9 # # 194-Temperature_Celsius 30 42 Up 12 # # 199-UDMA_CRC_Error_Count 106412609 108881971 Up 2469362 # # # # # # # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!.
  21. ๐Ÿ˜ฅ๐Ÿ™„ I would be really sad if that was the case. I will pop it into another slot and update you soon. Cheers!
  22. Hey johnnie.black, Thanks for chiming in. I actually saw this same reason mentioned online when I was researching this. I have re-seated the Drive a few times and it keeps on increasing with every smart test / preclear I do on the disk. It is on my rear 2.5" Drive Slot of R720xd so I feel that is good as well. Examples below. Maybe you can get some more clarity with this. preclear_report_XXXXXXXXX_2019.09.28_06.39.23.txt ############################################################################################################################ # # # unRAID Server Preclear of disk XXXXXXXXX # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Post-Read verification: [3:07:27 @ 88 MB/s] SUCCESS # # Step 2 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Zeroing the disk: [3:07:42 @ 88 MB/s] SUCCESS # # Step 5 of 5 - Pre-read verification: [3:06:47 @ 89 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 9:22:07 | Total elapsed time: 9:22:08 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 8462 8471 Up 9 # # 194-Temperature_Celsius 28 38 Up 10 # # 199-UDMA_CRC_Error_Count 83943701 86420220 Up 2476519 # # # # # # # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. preclear_report_XXXXXXXXX_2019.11.22_07.38.53.txt ############################################################################################################################ # # # unRAID Server Preclear of disk XXXXXXXXX # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Post-Read verification: [3:06:18 @ 89 MB/s] SUCCESS # # Step 2 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Zeroing the disk: [3:08:20 @ 88 MB/s] SUCCESS # # Step 5 of 5 - Pre-read verification: [3:08:17 @ 88 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 9:23:11 | Total elapsed time: 9:23:13 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 8694 8703 Up 9 # # 194-Temperature_Celsius 30 34 Up 4 # # 199-UDMA_CRC_Error_Count 87317299 89793763 Up 2476464 # # # # # # # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. preclear_report_XXXXXXXXX_2019.11.23_19.28.30.txt ############################################################################################################################ # # # unRAID Server Preclear of disk XXXXXXXXX # # Cycle 2 of 2, partition start on sector 64. # # # # # # Step 1 of 6 - Post-Read verification: [3:04:53 @ 90 MB/s] SUCCESS # # Step 2 of 6 - Verifying unRAID's Preclear signature: SUCCESS # # Step 3 of 6 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 6 - Zeroing the disk: [3:04:22 @ 90 MB/s] SUCCESS # # Step 5 of 6 - Erasing the disk: [3:05:42 @ 89 MB/s] SUCCESS # # Step 6 of 6 - Pre-read verification: [3:04:17 @ 90 MB/s] SUCCESS # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 12:19:22 | Total elapsed time: 24:45:37 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 CYCLE 2 STATUS # # 5-Reallocated_Sector_Ct 0 0 0 - # # 9-Power_On_Hours 8714 8727 8739 Up 25 # # 194-Temperature_Celsius 30 34 34 Up 4 # # 199-UDMA_CRC_Error_Count 89799429 93099068 96395714 Up 6596285 # # # # # # # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. preclear_report_XXXXXXXXX_2019.11.26_00.43.02.txt ############################################################################################################################ # # # unRAID Server Preclear of disk XXXXXXXXX # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 3 - Verifying unRAID's Preclear signature: SUCCESS # # Step 2 of 3 - Writing unRAID's Preclear signature: SUCCESS # # Step 3 of 3 - Zeroing the disk: [3:03:43 @ 90 MB/s] SUCCESS # # # # # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 3:03:51 | Total elapsed time: 3:03:52 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status (device type: default) # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 8789 8792 Up 3 # # 194-Temperature_Celsius 28 37 Up 9 # # 199-UDMA_CRC_Error_Count 103063650 103886091 Up 822441 # # # # # # # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. Thanks, -SS
  23. Hi Guys, I have this one HDD that shows particularly high "UDMA CRC error count" - 106411915 and still passes SMART Extended Test. CA Fix Common Problems Plugin also showed notification once when I plugged the drive first time into the server saying "High UDMA CRC error count". Should I keep the drive for a rainy day or should I chuck it into the Trash Can without doubt? I swapped it for SSD in my old laptop thus the 8979 Power on hours. Currently the drive is an Unassigned empty spare just in case I need it. Attaching Screenshot and smartctl data below for reference. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.56-Unraid] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MQ01ABD... Device Model: TOSHIBA MQ01ABD100 Serial Number: XXXXXXXXX LU WWN Device Id: XXXXXXXXXXXXXXXXXXXXXX Firmware Version: AX0P2D User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Dec 13 05:20:16 2019 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 236) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 128 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1728 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 8978 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1258 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 339 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 209 193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 200083 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 (Min/Max 9/56) 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 106411915 200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always - 277302786 240 Head_Flying_Hours 0x0032 087 087 000 Old_age Always - 5418 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 60050122750 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 53705701370 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 150 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8976 - # 2 Short offline Completed without error 00% 8642 - # 3 Short offline Completed without error 00% 8608 - # 4 Short offline Completed without error 00% 8518 - # 5 Short offline Completed without error 00% 8095 - # 6 Short offline Completed without error 00% 5752 - # 7 Short offline Interrupted (host reset) 30% 4497 - # 8 Short offline Completed without error 00% 4233 - # 9 Short offline Completed without error 00% 3504 - #10 Short offline Completed without error 00% 3406 - #11 Short offline Completed without error 00% 3257 - #12 Short offline Completed without error 00% 3257 - #13 Short offline Completed without error 00% 3026 - #14 Short offline Completed without error 00% 2795 - #15 Short offline Completed without error 00% 1744 - #16 Short offline Completed without error 00% 1363 - #17 Short offline Completed without error 00% 1144 - #18 Short offline Completed without error 00% 984 - #19 Short offline Completed without error 00% 612 - #20 Short offline Completed without error 00% 469 - #21 Extended offline Interrupted (host reset) 90% 258 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Thanks in Advance! -SS Dell R720xd - 12 x 3.5" + 2 x 2.5" | Lenovo SA120 - 12 x 3.5" 2 x E5 - 2650 V2 | 128Gb DDR3 ECC RAM IT MODE HP H220 LSI 9207-8i | IT MODE LSI 9207-8e | Dell PERC H710 RAID Controller Data drives: 4 x 4Tb - WD Gold 3.5" | 2 x 4Tb - Seagate Ironwolf 3.5" | 6 x 8Tb - WD Red 3.5" | 2 x 12Tb - WD Red 3.5" Parity drives: 2 x 12Tb - WD Red 3.5" Cache: 1 x 1Tb SSD - Samsung 850 Pro 2.5" Unassigned: 1 x 1Tb 2.5" - WD Blue 2.5"
  24. Hey thanks for chiming in with your thoughts. I am trying to create a bootable USB from windows 10 laptop non-UEFI. V6.6.6 can be made bootable via manual method or program but same is not working for v6.7.1 or v6.7.2. I'm really confused. Tried over 5 times already. Thanks, Shomil
  25. Hello, I am running UnRaid Nvidia v6.6.6 switched from standard Unraid v6.6.6 currently. I have PRO license. Running on Dell PowerEdge R720xd with 10+2 Drives Configuration and 1 Cache drive. A pair of E5-2650x and DDR3 128Gb ECC memory. When I try to create a USB for v6.7.1 or v6.7.2 it is not marked as Bootable. Tried the Flash creator and Legacy method as described on help pages (Unraid Getting Started Page). Someone please help me. I essentially want to upgrade to latest build. Also, if I try to upgrade from Unraid Nvidia 6.6.6 build to Unraid Nvidia 6.7.1 build then the network settings have an issue. Cannot connect to GitHub(common problems plugin) and Unraid Nvidia plugin UI shows a bunch of errors, below is line 1 of error. Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: System error in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 Docker networks work fine and apps are available on network. Thanks in Advance! Cheers!