Ricin

I can not help but i get exactly the same error when trying to install it from Apps.

Diags attached. kedge2-diagnostics-20230621-1456.zip

Re-formateed and it works perfectly now thank you . Thank you so much for your help would have never sorted that by myself lol.

Finished rebuild shows as disk is onlne green circle. But can not add any files to it still says Unmountable: Unsupported or no file system. Would it be worth trying a New Config ? if I do that and put the drives in the same spots I loose no data on my array or Cache ? My second thought is I have a 2nd Unraid Server that one will ZFS format on the Array with no problem. Could I not format a drive on there then just add it to my current array ?

You mean a Data-Rebuild that will take about 19 hours approx. I can see it is writing to Disk2.

No idea OK started fresh did a reboot. Then put fs into ZFS same thing Unsuported or no file system. Did a format same thing. Here is response from zpool import. root@Kedge2:~# zpool import pool: disk2 id: 17715939750724334780 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk2 ONLINE md2p1 ONLINE Now I set the fs to Auto and it says Unmountable No Device. I did not format the drive ran zpool import. root@Kedge2:~# zpool import pool: disk2 id: 17715939750724334780 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk2 ONLINE md2p1 ONLINE Rebooted says same thing Unmountable No Device ran zpool import. root@Kedge2:~# zpool import pool: disk2 id: 17715939750724334780 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk2 ONLINE md2p1 ONLINE DIags attached for after the reboot. I think I lost the Disk2 first time becuse I formated after going to Auto. This time I never formated. kedge2-diagnostics-20230620-0926.zip

Also run Zpool import root@Kedge2:~# zpool import no pools available to import root@Kedge2:~#

Did as you said put in Auto came up Unmountable: No device. I then formatted the drive still said Unmountable: No device. After the reboot same message Unmountable: No device. Here is the Diags after boot. kedge2-diagnostics-20230619-2147.zip

Yes online when array is started. Might take me a while to reply, as I need to go to work but thank you very much for all your help so far. I will reply when home attched at latest Diags. kedge2-diagnostics-20230619-1400.zip

If I stop the array I get the following. root@Kedge2:~# zpool export disk2 cannot open 'disk2': no such pool root@Kedge2:~#

Lol no problem thought I was doing it wrong root@Kedge2:~# zpool import pool: disk2 id: 806229581894550300 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk2 ONLINE md2p1 ONLINE root@Kedge2:~#

root@Kedge2:~# zfs import unrecognized command 'import' usage: zfs command args ... where 'command' is one of the following: version create [-Pnpuv] [-o property=value] ... <filesystem> create [-Pnpsv] [-b blocksize] [-o property=value] ... -V <size> <volume> destroy [-fnpRrv] <filesystem|volume> destroy [-dnpRrv] <filesystem|volume>@<snap>[%<snap>][,...] destroy <filesystem|volume>#<bookmark> snapshot [-r] [-o property=value] ... <filesystem|volume>@<snap> ... rollback [-rRf] <snapshot> clone [-p] [-o property=value] ... <snapshot> <filesystem|volume> promote <clone-filesystem> rename [-f] <filesystem|volume|snapshot> <filesystem|volume|snapshot> rename -p [-f] <filesystem|volume> <filesystem|volume> rename -u [-f] <filesystem> <filesystem> rename -r <snapshot> <snapshot> bookmark <snapshot|bookmark> <newbookmark> program [-jn] [-t <instruction limit>] [-m <memory limit (b)>] <pool> <program file> [lua args...] list [-Hp] [-r|-d max] [-o property[,...]] [-s property]... [-S property]... [-t type[,...]] [filesystem|volume|snapshot] ... set <property=value> ... <filesystem|volume|snapshot> ... get [-rHp] [-d max] [-o "all" | field[,...]] [-t type[,...]] [-s source[,...]] <"all" | property[,...]> [filesystem|volume|snapshot|bookmark] ... inherit [-rS] <property> <filesystem|volume|snapshot> ... upgrade [-v] upgrade [-r] [-V version] <-a | filesystem ...> userspace [-Hinp] [-o field[,...]] [-s field] ... [-S field] ... [-t type[,...]] <filesystem|snapshot|path> groupspace [-Hinp] [-o field[,...]] [-s field] ... [-S field] ... [-t type[,...]] <filesystem|snapshot|path> projectspace [-Hp] [-o field[,...]] [-s field] ... [-S field] ... <filesystem|snapshot|path> project [-d|-r] <directory|file ...> project -c [-0] [-d|-r] [-p id] <directory|file ...> project -C [-k] [-r] <directory ...> project [-p id] [-r] [-s] <directory ...> mount mount [-flvO] [-o opts] <-a | filesystem> unmount [-fu] <-a | filesystem|mountpoint> share [-l] <-a [nfs|smb] | filesystem> unshare <-a [nfs|smb] | filesystem|mountpoint> send [-DnPpRVvLecwhb] [-[i|I] snapshot] <snapshot> send [-DnVvPLecw] [-i snapshot|bookmark] <filesystem|volume|snapshot> send [-DnPpVvLec] [-i bookmark|snapshot] --redact <bookmark> <snapshot> send [-nVvPe] -t <receive_resume_token> send [-PnVv] --saved filesystem receive [-vMnsFhu] [-o <property>=<value>] ... [-x <property>] ... <filesystem|volume|snapshot> receive [-vMnsFhu] [-o <property>=<value>] ... [-x <property>] ... [-d | -e] <filesystem> receive -A <filesystem|volume> allow <filesystem|volume> allow [-ldug] <"everyone"|user|group>[,...] <perm|@setname>[,...] <filesystem|volume> allow [-ld] -e <perm|@setname>[,...] <filesystem|volume> allow -c <perm|@setname>[,...] <filesystem|volume> allow -s @setname <perm|@setname>[,...] <filesystem|volume> unallow [-rldug] <"everyone"|user|group>[,...] [<perm|@setname>[,...]] <filesystem|volume> unallow [-rld] -e [<perm|@setname>[,...]] <filesystem|volume> unallow [-r] -c [<perm|@setname>[,...]] <filesystem|volume> unallow [-r] -s @setname [<perm|@setname>[,...]] <filesystem|volume> hold [-r] <tag> <snapshot> ... holds [-rH] <snapshot> ... release [-r] <tag> <snapshot> ... diff [-FHt] <snapshot> [snapshot|filesystem] load-key [-rn] [-L <keylocation>] <-a | filesystem|volume> unload-key [-r] <-a | filesystem|volume> change-key [-l] [-o keyformat=<value>] [-o keylocation=<value>] [-o pbkdf2iters=<value>] <filesystem|volume> change-key -i [-l] <filesystem|volume> redact <snapshot> <bookmark> <redaction_snapshot> ... wait [-t <activity>] <filesystem> Each dataset is of the form: pool/[dataset/]*dataset[@name] For the property list, run: zfs set|get For the delegated permission list, run: zfs allow|unallow root@Kedge2:~#

May I ask where I do that is it in Terminal ?

Hi I wonder if anyone can please help me. I upgraded to 6.12.0. I would like to format my Array disks to ZFS. I put Disk 2 of my Array from XFS to ZFS clicked format and it comes up Unmountable: unsupported or no file system. It works perfect if I put it into a Pool of 1 disk. Just will not work on the array I have tried a few different hard drives. kedge2-diagnostics-20230619-1104.zip

Brilliant thank you so much fixed it perfect

Hi my Backup Unraid Server seems to have a problem. I run it nightly to backup from my Main Server so I rarley actually turn it on. Today I turned it on and found in Docker the Network Type: Custom is missing I have Bridge Host None but no Custom. How do I get that back please ? as I need to give my Docker Containers Static IP addresses. It used to work pefectly. Please see Pic attached and I attached DIagnostics to. Any help would be great I love Unraid used it for many years. backup-diagnostics-20221004-2139.zip

Thank you rilles worked perfect

Thank you for that Will give it a go if I cant get Letsencrypt working. Spent most of the day getting that very close just keep getting error 521 from cloudflare. Tomorrows another day will have a look when more awake.

rilles could you please post your Caddyfile as I am not 100% sure where to put the "tls caddy-selfsigned.key caddy-selfsigned.crt" part. I have the Certs created and in my /mnt/cache/appdata/caddy. Also how did you manage to save the Caddyfile using vi ? When I amended the Caddyfile with vi I could not work out how to save it lol. Pressing Esc did nothing then any combination of the Alt Key seemed to do nothing much as well.

Will do wont have chance to try it for a couple of days as I will be working. I do use pfsense to that would be handy. But to be honest not to fused as long as I can open a port for a few hours even a day would be fine. Then close it for the majority of the time.

Thanks for the reply. If thats the case and I only need to open the port every 90 days that would be ideal. Guess I can try it either it works it it wont lol.

First off thank you SpaceInvaderOne for the amazing videos helped me no end of times. I want to run a Bitwarden internally on Unraid which is fine i can do that no problem. But I also want to use Brave as its based on Chrome. Out of the box it will not work for a home server of Bitwarden. Due to something about how Chrome handles HTTPS. I installed Bitwarden on Unraid works great with Firefox but as I say I use Brave. It will work if I use a Reverse Proxy such as LetsEncrypt in your great video. Thing is I do not want to open any ports on my router I do not need outside access to Bitwarden. I would all be handled internally on the LAN. But I do need to have it working under HTTPS. As far as I can tell I can only use LetsEncrypt if it opens port 443 on my router or have I misunderstood that. Can I can I follow your video for the reverse proxy and leave 443 closed and still have HTTPS on the LAN ? Thanks for any help.