frodr

What is IT mode? And how to set it?

I see. Thanks.

Thanks for quick reply. 3) Let med clarify. I plan to move all cache share to hdd in case of need to format, change, or other to the current ssd cache drives.. When doing this move I should set Shares cache setting to "No" and run "Move". Right? And when the ssd cache drives are up and running connected to the HBA I set Shares cache setting to "Prefer" and run "Move" again.

Hi, I am planning to move my 4 ssd cache drives standard SATA to LSI SAS 9300-8i HBA. Three questions: 1) Will unRaid 6.7 recognise ssd`s connected to this HBA? 2) Will the ssd`s have to be reformatted after connected to the HBA to again be setup as cache drives? 3) Can I just set Shares cache settings from "Prefer/Only" to "No" and run "Move", and then be able to remove the ssd cache drives and the Server run as is? I be happy for any advice. Cheers, Frode

80-85 is fine, but 35GB/s when another is running at 3x-

Hi, Backup fra unRaid cache drive to a Nas in my cabled network gave about 35MB/s transfer speed. Is that the transfer speed to expect? When doing backup from/to the same shares with Acronis True Image run on a VM is was about 100MB/s. // Frode

Thanks. Is it the same with NFS shares as well?

Hi, I have problems getting duplicati to run. Setup is fine, destination is a smb share from a Nas. I backing up a vdisk (not running) to this destination. It runs to about 10%, then it stops. At that point I am able to move around inside the duplicati WebGui. Ending the duplicati WebGui browser tap, it is not possible to reconnect (from the duplicati docker). Restarting or stopping the duplicati docker is not possible. The only way to end the duplicati docker is to restart the server. Then I am able to start and connect to duplicati. Starting the backup job the % counts up to where it first stopped, and there it hangs again. When hanging one processor thread is running constant at 100%. Some pics and logs are attached. Hoping for some good advices. // Frode Edit: Restart of the server from unRain WebGui is not working after the duplicati job run. Graceful shutdown from IPMI not working, only hard shut down. maxx-diagnostics-20190521-1354.zip

Yes. Yes. Pushing the "Load shares" button not shares are available, and not possible to type. Not pushing the "Load shares" button, instead typing the share name and then add without pushing "Load shares" is possible. Then pushed the button "Mount". Then it the button shows "Mounting" and stays there until I move to another area of the Server. I then get a question from Safari if I want to store the password. Just ignoring that, going back to Main. And hola, now the share on the Nas is mounted. So ignoring "Load servers" and "Load shares" buttons did the trick. A bit confusing I have to say. Thank you very much for the help. Cheers, Frode

I only have one subnet on my router. 192.168.1.10, as Qnap NAS, is set up smb/Workgroup, not AD. The Nas is fully available to other computers. With Goodsync I have made smb sync between the Nas and the unRaid server. After typing 192.168.1.10 only and push the "search for servers" button, nothing happens. Well, a small "blink", that's all. Adding user/pass and then push Load shares, no shares is visible. Please see attached video for how I do it. Router is restarted. Screen Recording 2019-05-20 at 21.59.03.mov

Sorry. maxx-diagnostics-20190520-1832.zip

Not able to load shares or mount. Log attached. Log.rtf

The Search Button blinks, and nothing happens.

Tried that, not working.

Hi. The Server do not seem to recognise smb devices, not finding NAS or MBPro. Both are set up smb. What is the domain setting, Workgroup? I be happy for any help. Cheers, Frode Running 6.7

Hi, MacOS kvm is running. Also running with GTX 1070 passthru, but the GPU is not seen by the OS. The GTX 1070 is a Mac flashed GPU from Macvidcards, is such likely to work? If yes, then the question is what must cange in my setup? Link to the xml: https://www.dropbox.com/sh/3x5cqsy6nloqb5n/AAAHZdhRSx8DKxJdgT6_YxD7a?dl=0

Thanks all, I am up and running now with Plex and VMs. Very much that fast due to SpaceinvaderOne`s very useful instrction videos. Running Plex with Nvidia RTX4000. Soon as data is copied I will do some testing.

Thanks.

Hi. I'm new to this forum and new to unRaid. In my late 50`s, not tech skilled. Been in the computer business since mid 80`s, actually launched Amiga 500 for Commodore back in ´87 I think it was. I am planning setting up UnRaid on a Supermicro Workstation (pressed purchase button today). Plex (4K transcoding) on Unbuntu with GPU passthru, a Mac vm, a Win vm, Roon Server, backup for friends and family, etc. So I will most likely ask for help from time to time. Looking forward to talk to you. Cheers, Frode