mr-hexen

Did you do the 'go' file edits too? I'm wondering because I couldnt get it to work w/o priviledged...i5-4460 here. This is from putty to the host: root@Tower:~# ls -la /dev/dri/ total 0 drwxr-xr-x 2 root root 100 Mar 9 16:14 ./ drwxr-xr-x 16 root root 4000 Mar 10 20:09 ../ crwxrwxrwx 1 root video 226, 0 Mar 9 16:14 card0 crwxrwxrwx 1 root video 226, 64 Mar 9 16:14 controlD64 crwxrwxrwx 1 root video 226, 128 Mar 9 16:14 renderD128 This is exec'd into the docker: root@Tower:~# docker exec -it PlexMediaServer /bin/bash root@Tower:/# ls -la /dev/dri total 0 drwxr-xr-x 2 root root 100 Mar 10 20:20 . drwxr-xr-x 14 root root 3840 Mar 10 20:20 .. crwxrwxrwx 1 root 18 226, 0 Mar 10 20:20 card0 crwxrwxrwx 1 root 18 226, 64 Mar 10 20:20 controlD64 crwxrwxrwx 1 root 18 226, 128 Mar 10 20:20 renderD128 Not sure if those perms are right Plex logs say "renderD128" not found...

It only started working for me when I added the privileged setting. Otherwise it always software encoded. I'm wondering if the container is using my HD5450 (passed to a VM) to encode or the iGPU?

@binhex great catch.

Ya nothing is jumping out from the logs for me either...do you have any special characters or spaces in your username / password? Verify the username / password on the pia website too. The log's saying using previous IP, never seen that message before.

What about the NUT plugin ?

Show a screen shot of your docker config for the deluge docker.. wipe out the username / pass.

Credit goes to: https://forums.lime-technology.com/topic/53388-enabling-i915-for-host/?do=findComment&comment=530722 I had to change some things around in the plex config to get it to work. Not sure if these changes apply to just the LSIO docker or all docker variants. Changes highlighted for reference. Must be on unRAID 6.3.x or higher as they added the i915 to the kernel in the RC phases. Add to "/boot/config/go" (very first lines): modprobe i915 chmod 777 /dev/dri/* Then to the Plex docker config: Change to mode to Privileged. Extra Parameters: "--device=/dev/dri:/dev/dri" Version: "#.#.#.####-xxxxxxx" (need plexpass) Reboot system open Plex > settings > SERVER > transcoder, "Show Advanced" > check off "Use hardware acceleration when available (Experimental)" Start a stream, force transcoding by lowering bitrate. Open a new plex window, click Status > Now Playing and click the (i) on the stream. If you see (hw) in the video line you've enabled it successfully.

Nope, i moved away from SickRage a year or two ago and never looked back. I think this was the era where their updates / development was stale..Sonarr has been ROCK solid and a pleasure.

This was fixed in Sonarr on Mar 7, 2017: 2.0.0.4645 - Mar 7 2017 Installed Fixed Deluge 1.3.14 API support due to changed json-rpc checks. (hotfix) Fixed DownloadStation client stuck in infinite loop in some cases. Fixed DownloadStation client failing if non-bt/nzb downloads exist. Fixed NZBGet delete:scan treated as failure

Anyone on 6.3.x w/ PlexPass really needs to set up the HW iGPU transcoding. I just got it working via this docker and my i5-4460 and was able to stream 7 transcoded streams at once and only had ~20% CPU usage doing it.

If you're using v6.3.x of unraid, try going back to 6.2.4 instead. I had similar issues w/ 6.3 and ubuntu VM's

Lack of supply would be indicated by low voltage (i.e. brown outs). But general switching you wouldn't notice a difference because they run them in parallel to limit disruptions.

Your example from the log shows nothing... but this could be a voltage transfer rather than a loss of supply transfer.

Try mounting the share as a drive in windows then writing to the "drive"?

Try putting the destination in quotes "\\tower\share"

Where in Ontario are you DoeBoye? I'm looking for 4GB (2x2GB) of cheap DDR2

Neither, unRAID can manage an APC UPS natively now.

If this included a server restart before hand its probably the ipmangle issue.

I'm using a Back-UPS 550G and It lists 21% load with a runtime of 30 minutes. I'd imagine you'd be ok with 500-600 so long as you have the onbatt time configured correctly.

Gotta love when the CEO takes the time to respond to people in forums!

Most mobile browsers have the ability to send the "desktop" version request. Check settings.

Compared to the comparable intel, its great. I think the 1800X compares against an intel that is over 100w.

The 1x00X series are 95w and the non-"X" are 65w.

If that scares you, don't compare hard drive prices.

The option I suggested is merely a stop gap. There is no upgrade path from there, keep this in mind too.