Ruato

First of all, thank you for the instant reply and support! Yes, correct. I would prefer to do it internally inside the Unraid server but there is not a Urbackup client available and it is needed. Or have I misunderstood something? Does Urbackup ignore the files that have not changed? That is, it transfers only the changed files since the previous backup? That way the performance hit is not so bad after the first backup. Yes, I was planning on syncing the Urbackup database. However, I might have limited understanding of the issue. So, what I want to acchieve is that if my Unraid server and the Urbackup installation inside it gets correupted / destroyed, I can still restore the backups using the files stored in my friends Unraid server. So, I need to sync everything that is needed for that. Do you know, whether the Urbackup internal database is enough or should I need to sync something else also?

Thank you for another excellent docker! I am planning on utilizing Urbackup to backup my vital files on my Unraid server. I am just not sure whether to implement/configure certain needs. The configuration - An Unraid server with about 15 shares (all exported read-only to prevent ransomware attacks). - A dedicated Windows VM where I would install an Urbackup client and enable read-only access to all shares to be backed up (file backups). - Windows desktop where I would install an Urbackup and configure an image backup of the computer. - Another Unraid server (my friend's) in a different location, where I would sync the backup databases. - My friends backup databases would be synced to my Unraid server also. - The backup traffic between our Unraid servers would go via a WireGuard tunnel. The questions - Backing up the shares would be easy if I could have an Urbackup client inside the Unraid server. However, would the above configuration achieve the same? - I would also backup the Unraid system files using this. That is, I need to export them as SMB shares (read-only). I guess there aren't any issues on this? - What would be the best way do the backup database syncs between our Unraid servers? Any examples? Thank you for any info!

Did you define the DNS? I had a similar issue that was resolved after I defined the DNS.

A plugin update fails with the following lines: plugin: updating: unassigned.devices.plg plugin: downloading: "https://github.com/dlandon/unassigned.devices/raw/master/unassigned.devices-2019.11.29.tgz" ... done plugin: bad file MD5: /boot/config/plugins/unassigned.devices/packages/unassigned.devices-2019.11.29.tgz Somebody else having this issue?

Good. Thank you for a fast reply.

By "same access rights as a local user" you refer to a local user in the unraid server? So, the remote computer/user will have, for example, access to all the shares from inside the unraid server? The reason I am asking is that if the remote computer gets infected by, for example, a ransomware virus. What kind of access and risk this would had for the unraid server?

I plan on installing wireguard for - Remote tunneled access - Remote access to server I guess, the remote tunneled access provides the same access to the LAN as remote access to LAN, right? So, what kind of access exactly this gives out? That is, what does this "Regardless of the "connection type" you choose, assume that anyone who gets access to this configuration information will be able to get full access to your network." mean in practice? Is the other party able to access the shares and server storage without any further authentication or do they still need to know the share and server passwords to achieve that?

I have an issue when preclearing disks in a certain HDD slot in my server. I have tried two different HDDs and they both work OK in a different slot but both give this error in this specific slot. I already changed the SATA cable but still the issue remains. However, the preclear goes through succesfully but I do not like the log and in the end it is stated that the link speed is lowered to 3Gbs. Any idea what might be the issue? The SMART report does not report any bad sectors. Thank you! The full log is attached. Here only the start of the issue and the end of log: Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: WDC_WD30EFRX-68AXXXX_WD-WMC1T08XXXXX (sdg) 512 5860533168 Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: exception Emask 0x10 SAct 0xffffff7f SErr 0x400000 action 0x6 frozen Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: irq_stat 0x08000000, interface fatal error Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5: SError: { Handshk } Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: failed command: WRITE FPDMA QUEUED Jul 16 12:14:21 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: cmd 61/40:00:40:e7:00/05:00:00:00:00/40 tag 0 ncq dma 688128 out Jul 16 12:14:22 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: status: { DRDY } [...] Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: failed command: WRITE FPDMA QUEUED Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: cmd 61/40:f0:c0:d8:01/05:00:00:00:00/40 tag 30 ncq dma 688128 out Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: status: { DRDY } Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: failed command: WRITE FPDMA QUEUED Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: cmd 61/40:f8:80:a5:02/05:00:00:00:00/40 tag 31 ncq dma 688128 out Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: status: { DRDY } Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5: hard resetting link Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5.00: configured for UDMA/133 Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: ata5: EH complete Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: Pausing preclear of disk 'sdg' Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: Resuming preclear of disk 'sdg' Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: Pausing preclear of disk 'sdg' Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: Resuming preclear of disk 'sdg' Jul 16 12:14:39 preclear_disk_WD-WMC1T08XXXXX_XXXX: syslog: sdg: sdg1 preclear_disk_WD-WMC1T08XXXX_XXXX.txt

@comet424 It worked! Thank you very much for the help!

I will try this and let you know how it goes. Thank you!

I have three 3 TB WD reds that I am adding to my array. For two of them preclear works as expected. However, for one of them I get this kind of log in the beginning: Jul 13 17:12:11 preclear_disk_WD-WMC1T0861973_29132: Command: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --notify 3 --frequency 3 --cycles 1 --no-prompt /dev/sde Jul 13 17:12:11 preclear_disk_WD-WMC1T0861973_29132: Preclear Disk Version: 1.0.4 Jul 13 17:12:11 preclear_disk_WD-WMC1T0861973_29132: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 1716: let: parts+=( / 4096): syntax error: operand expected (error token is "/ 4096)") Jul 13 17:12:12 preclear_disk_WD-WMC1T0861973_29132: S.M.A.R.T. info type: default Jul 13 17:12:12 preclear_disk_WD-WMC1T0861973_29132: S.M.A.R.T. attrs type: default Jul 13 17:12:15 preclear_disk_WD-WMC1T0861973_29132: Pre-Read: dd if=/dev/sde of=/dev/null bs=2097152 skip=0 count=3000592982016 conv=notrunc iflag=nocache,count_bytes,skip_bytes After this, the preclear seems to be fine. I tried to search this topic but didn't find anything for this. So, is something wrong with the disk or with something else? Thank you for the info!