newmember

Members
  • Posts

    18
  • Joined

  • Last visited

Everything posted by newmember

  1. With DHCP its not possible to see what IPs your VM are picking up without logging into them. So we could make the IPs appear in UNRAID on the VM page using a script. Would be possible to add the IPs of the VMs to the VM web guide page? I was thinking that a simple ARP could be done. So maybe start with a broadcast ping to the network. % ping 192.168.0.255 PING 192.168.0.255 (192.168.0.255): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Then do an arp with a filter of the MAC address form the Vm log -device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"52:54:00:05:9f:59","bus":"pci.0","addr":"0x2"}' \ Then filter for the MAC: % arp -a | grep 9f:59 ? (192.168.1.106) at 52:54:0:5:9f:59 on en6 ifscope [ethernet] ? (192.168.1.106) at 52:54:0:5:9f:59 on en0 ifscope [ethernet] Then check and filter the IPs from potentially multiple interfaces ? (192.168.1.106) at 52:54:0:5:9f:59 on en0 ifscope [ethernet] Then provide the IP(s) to the VM web guide page beside the VM. 192.168.1.106 We could maybe make the IP a clickable link to RDP or SSH? From VM start up log: netdev tap,fd=36,id=hostnet0 \ -device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"52:54:00:05:9f:59","bus":"pci.0","addr":"0x2"}' \ -chardev pty,id=charserial0 \ -device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \ -
  2. Can I have two pi-hole running using the same disk directory location? I want to run two pi-holes for HA. This appears to be running but maybe its not a good idea? Thank you
  3. For MSSQL 2019 the permissions for the container has changed from 'root' to 'mssql' so not the local mapped drives need to have the same permissions Ref: https://stackoverflow.com/questions/65601077/unable-to-run-sql-server-2019-docker-with-volumes-and-get-error-setup-failed-co Fiddle with folder directories for your server. 1. Start the MSSQL2019 container. 2. From the command line in UNRAID copy the folders from the containter to the mapped drive location: docker cp MS-SQL-Server:/var/opt/mssql/data /mnt/user/appdata/mssql/ docker cp MS-SQL-Server:/var/opt/mssql/secrets /mnt/user/appdata/mssql/ docker cp MS-SQL-Server:/var/opt/mssql/log /mnt/user/appdata/mssql/ 3. Shut down the MSSQL container: 4. Add these mappings to the MSSQL2019 container template: /mnt/user/appdata/mssql/data /mnt/user/appdata/mssql/secrets /mnt/user/appdata/mssql/log 5. Change the permssions on the folders and files: sudo chown -R 10001 /mnt/user/appdata/mssql/ 6. Start up the MSSQL2019 container
  4. unraid - latest - pro New Win10 VM Added new RADEON 5700XT card dropped the rom like spaceinvader suggested and added it to cfg When I first boot I expect the win10 install but I get a curser blinking in the top left for a min then stops cfg attached Thoughts? Thank you win10.txt
  5. Been sitting on the RADEON 5700 TXT for over a year and has never worked with Win10 on UNRAID. Read up on the latest passthough posts and watched SpaceInvaders stuff. Who would ever think that this reset bug in the Video card would last this long, or a kernel patch would be available. So, I am I missing anything? UNRAID or RADEON 5700 TXT or other options? Read a few last posts:
  6. My image was booting with either OS objects. Thanks I have updated those lines in OS. I have left the the VM cfg pointing to the /mnt/users/domains/MacintaboxCatalina/ovmf directory Cheers
  7. Thank you I found it easier to start the boot up to the Then I found the OVMF setting as you has described. It was set to 1920X1080 before I updated the CPU from 2 to 4 It was now set to 640X480. Then I updated it to 1920X1080, Then 'commit changes and exit. When I go back to the OVMF screen the 'preferred resolution' is updated ESC to exit Restart The first restart and I had he same 640X480 resolution. I stopped the VM Started the VM and good to go. Checking back: <memory unit='KiB'>16252928</memory> <currentMemory unit='KiB'>16252928</currentMemory> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='2' threads='2'/> This shows up as Dual Core and 2 Cores = 4 Cores total Thanks for the assistance.
  8. Thanks for the feedback. Am I in the right place to set the resolution in Clover?
  9. I updated the network card to vmxnet3 and when I reboot I see this issue with the vnc video. Thoughts? Thanks
  10. Just checked screen never turn off power Never sleep High performance
  11. ok I see that. drat I guess i will have to replace the video card. what gaming video cards are available that will work? Thanks
  12. Sometimes I loose access to the video output. Like Win10 has froze. But most of the time I would like to 'stop' Win10 from the UNRAID GUI instead of having to log into WIn10 and shutdown.
  13. Fro the UNRAID VM GUI, when I try to stop the Win10 VM nothing happens. When I try to restart the Win10 nothing happens. (see attached screen shot) Added diagnostics to attachments I am missing a Win10 driver to allow these controls to work? tower-diagnostics-20200215-1801.zip
  14. When my Win10 reboots I see the error: internal error: Unknown PCI header type '127' for device '0000:45:00.0' To resolve the error I have reboot the entire UNRAID server. Thoughts please. Thank you very much. Tools -> Diagnostics -> attach zip file What steps did you follow? Did you dump your own vbios? Did you download it from Techpowerup? What is your hardware, particularly motherboard? What's your mobo BIOS version? Added new Win10 VM. Added GPU pass-through, added BIOS from Techpower. Win10: latest release update. BIOS: https://www.techpowerup.com/vgabios/212289/xfx-rx5700xt-8192-190616 MB: https://www.msi.com/Motherboard/X399-GAMING-PRO-CARBON-AC.html MB Version: 1.C0 tower-diagnostics-20200215-1801.zip
  15. Thank you. I changed my NIC from vmxnet3 to <model type='e1000-82545em'/> All good
  16. Error connecting to apple. Both imessage and app store fail. Thoughts?
  17. Running: unRaid OS PRO Version: 6.7.2 VM: win10Pro - 1903 Video: VNC boots, and RDP works Video: Gigabyte8400 GS 128 MB, boots and RDP works, nomachine only has supper small display size. Video: XFX RX 5700 XT 8 GB, NO BOOT, no ping response, no RDP access Downloaded ROM from techpowerup.com, tried editing it based on SpaceInvaderOne (see attached) I have tried Hyper-V on and off I have attached VM CFG XML I have attached VM Log files Suggestions are greatly appreciated. XFX.RX5700XT.8192.190616.rom XFX.RX5700XT.8192.190616-edit.rom XFX.RX5700XT.8192.190906_1.rom XFX.RX5700XT.8192.190906_edit.rom Win10-logs.txt Win10Procfg.xml
  18. Created my Win10 (spaceinvader rocks Thank you) Used vnc video and something audio. Setup Win10 through vnc. Installed NoMachine Logged in with NoMachine Shut down VM Switch to XFX Radeon RX 5700 8GB PCI-E Which shows up as: IOMMU group 50:[1002:731f] 45:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 (rev c1) IOMMU group 51:[1002:ab38] 45:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 HDMI Audio Restart the VM I log into NoMachine I see the desktop Cant type or move the mouse. MB is: IOMMU group 14:[1022:43ba] 01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset USB 3.1 xHCI Controller (rev 02) IOMMU group 15:[1022:43b6] 01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset SATA Controller (rev 02) Thoughts on how to get the Keyboard and Mouse working? Thanks VM XML: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10 - test1</name> <uuid>8c10951e-c837-ef8b-c01e-f12bc86f5c93</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='10'/> <vcpupin vcpu='1' cpuset='22'/> <vcpupin vcpu='2' cpuset='11'/> <vcpupin vcpu='3' cpuset='23'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-3.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/8c10951e-c837-ef8b-c01e-f12bc86f5c93_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='4' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10 - test1/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:ed:76:46'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='3'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x45' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x45' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1b1c'/> <product id='0x1c08'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1e71'/> <product id='0x170e'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <memballoon model='none'/> </devices> </domain>