• Posts

  • Joined

  • Last visited

Everything posted by z0ki

  1. My GPU died I got a spare old one lying around. Will I encounter any issues putting in a different card into my unRaid server? Or will the nvidia plugin be smart enough to detect a different card?
  2. Hey guys time has come and I know I should have done this from the start with proper storage drives in place. My server consists of a 10TB and 4TB drive and a few small 500GB drives just for miscellaneous stuff. I got two 16TB drive that I want to install but what I want to do is move all my media to these new drives and start fresh in unraid (dockers, vms not important) What is the best way to do this? After pre-clearing the drives should I install thsm, move data over within unraid, then unassigne the old drives remove then new config? I want to start completely new/fresh with a new USB too (key file will be saved) Am I going about this correctly or is there a better way to do this?
  3. Yeah it does a little thanks mate. So I guess it isn't as cut throat as I thought it would be. I am surprised there isn't a somewhat "official" container for this sort of thing considering how great OBS is via NDI. I was hoping to avoid building a dedicated streaming PC and use my unraid server but I guess it is what it is I suppose.
  4. Hi @ich777 Thank you for getting back to me. I am doing this via a Docker Container. Which I got the instructions from here https://www.spxlabs.com/blog/2020/5/22/unraid-obs-capture-encoding-and-streaming-server I do have NDI setup, and I followed the instructions on the first page to add NVIDIA Visible Container etc but I am not sure if I am supposed to do this to both containers that get installed via the link above or not? The reason why I say this is because when I add the relevant nvidia driver info to the docker-obs-ndi I can see select NVENC in OBS but then the screen is blank even though NDI is on. And I can see my CPU usage drop drastically (i'm assuming GPU is doing it's work) but as mentioned, screen is blank. BUT, if I remove it from docker-obs-ndi, and then use the NVIDIA Variables in the 'edit' section of docker-obs I have image and even though NVENC is selectable it isn't using the GPU but CPU still. I feel I am close but at a dead end. If you need more info let me know. Just too add when I type nvidia-smi into Terminal it doesn't show anything is used which is odd but could explain the issue. But not sure.
  5. Hey guys hopefully someone can give me an answer regarding this nvidia driver. I have setup OBS NDI on my unraid server if I install this nvidia driver on my unraid server, will this then allow me to use the NVENC encoder within OBS on my unraid server?
  6. For some reason over the past few weeks I notice that - DNS seems to stop working for a few minutes, then it starts working again. It's quite annoying as it will block certain websites for a while, then they start working again. Is there an issue with the latest update?
  7. Strange behaviour is still happening and I cannot for the life of me figure it out. Over a few days an appdata folder is created in my Media share and it's labelled binhex-plexpass and as a result it is (something, god knows what) constantly being written or read to, then high CPU usage is then present. I then delete that appdata folder that gets magically created in my Media share and all goes back to normal. My Cache Drive is setup properly and i've never had this issue in the past it's only recently in the past couple of weeks it's started. My Cache drive settings are all exactly as it was from day one nothing's changed.
  8. Just a quick question, I am wanting to know how I can adjust my PWM fans on my AIO to coincide with CPU temp? It looks as though it’s tied to hard drive temp but I have very quite 140mm noctua fans running at 100% for my drives so they’re always cool. I am trying Auto Fan from Dynamix but I don’t think it’s working properly as in the fan speed does not increase with cpu temp. As you can see my AIO noctua fans are running in the 200rpm range lol. Is Auto Fan purely tied to HDD temp? And if so is there any plugin tha.t will make fans work via CPU TEMP? Or unRaid is not capable of this so I’m stuck with BIOS Q-fan instead?
  9. Right, so what do you propose I do to overcome this issue? Because as I said, if I leave the date as is in the BIOS (set by UTC) and set it to wake up at a set UTC time (which equates to 7am my time) it does not turn on. If I bring the date forward manually and do a test time to turn on half an hour later it turns on. I am going in my BIOS > APM > Power on by RTC (ENABLE) > RTC ALARM DAYS set to 0 for everyday > Hour 19 (which will be 7am my time) > Minute 0 > Seconds 0. Sent from my iPad using Tapatalk
  10. I've done that. The problem is that as I stated when it is Saturday morning here it is still Friday night for their timezone that is set by unRaid in the BIOS. Even though I do set it for say 19:00 the server does not turn on in the morning as the date is wrong between UTC timezone and mine. I feel that is the root cause of the problem here (could be wrong) but as I said this was working before it's only just recently that it's stopped working completely. For extra info. If I wake up at 7am my time, and I load up my server and go into the bios and set the time to 19:05pm (and set the date forward as it should be to the correct day for my timezone) and switch the server off as soon as 19:05pm hits (7:05am my time) the server turns itself on. In contrast if I leave the DAY alone for the UTC timezone that its set itself (which is like I said Friday evening there, Saturday morning here) soon as 19:05pm hits server doesn't turn on automatically.
  11. Correct. But is it not possible to have the date in the BIOS correspond with my local timezone? This was fine before not sure why it is giving me issues now? I understand it sets the BIOS to UTC and that's fine I can bypass that by setting it to turn the server on at 19h (7am AEST) but obviously the date is wrong it still thinks it is Friday when it is indeed Saturday morning. I am sure the date was fine for me in the past as my server did always turn on at 7am until only recently. Is there a way to fix this?
  12. Thanks @Frank1940 The bios time is 100% accurate (to the second) according to Time.is/London but obviously when it's 7am Saturday morning here in Australia, it is still 9pm Friday night there so the date in the bios doesn't adjust to this and stay's on Friday (until midnight UTC time obviously) It seems to be the main issue here as I said, if I manually change the date and then set the time for the server to turn on in the bios it does. Strange one lol
  13. So there is a problem with this 'system' from what I can tell. My server will no longer turn on via RTC and It looks like it is due to the date being wrong in my BIOS after unRaid shutdowns or reboots. Instead of it saying Saturday (but with UTC time) it says Friday. If I change it to today's date (1/02/20) and set the time for it to turn on from shutdown it does. So why is unRaid upon rebooting/shutting down change the day to what it is in the UK? From reading little what I could on this topic, it seems it should just change the bios clock to UTC but keep my Local date for this reason?
  14. TV Show folders are not being detected? What is wrong? filebot -script fn:amc --output "/home/user/downloads/deluge/LFTP" --def "movieFormat={fn =~ /2160p|4K|4k|UHD/ ? '4K Movies' : 'HD Movies'}/{n}/{fn}" --def "seriesFormat={fn =~ /2160p/ ? 'TV Shows 4K' : 'TV Shows'}/{n}/{episode.special ? 'Special' : 'Season '+s.pad(2)}/{n} - {episode.special ? 'S00E'+special.pad(2) : s00e00} - {hd} - {vc} - {vf} - {t.replaceAll(/[\`´‘’ʻ]/, /'/).replaceAll(/[!?.]+$/).replacePart(', Part \$1')}{'.'+lang}" --action hardlink -non-strict "/home/user/downloads/deluge/completed" --def excludeList=amc.txt
  15. Thanks for the reply, but I got this fixed I just added the known_hosts file to my config/ssh folder so now no longer need to manually accept SSH key then use LFTP, basically as you described. So all good thanks
  16. So after a little more research it looks like It's the linux based system that is reverting the BIOS clock to UTC automatically which I did not know it did that. That explains a lot then.
  17. So I’ve come across an annoyance that I have been trying to fix for a few days now. I noticed that my bios clock resets after every unRaid reboot. I set it to the correct time then I reboot and it looks like it changes to UTC time. I originally thought it was the battery but I changed that and it’s still doing it. I then rebooted with a monitor connected to my server and saw thus time (marked in yellow) So even though my unRaid Time & Date settings and NTP servers are correct it looks like it is changing my BIOS clock at will after any reboot, or power down. And then it turn it ruins my RTC which I use to turn my server on every morning at 7am. So, is there an actual fix for this? Surely there must be a way for my BIOS to keep my local GMT (AEST) Australian Eastern Standard Time as it should and not have unRaid change it? Sent from my iPad using Tapatalk
  18. But I’ve had it setup exactly like that since day one. I’m not entirely sure if it was the latest plex update or the latest unRaid update that did this. Looking at the media share where this new ‘appdata’ folder has been created it’s dated as today and around the same time I’ve updated unRaid. In saying that I did notice when I did update plex my plex server was “missing” and so had to create a new one which was very odd. Never had this happen before in nearly 12 months Sent from my iPad using Tapatalk
  19. I don’t know what the hell happen but for some odd reason after updating to the latest binhex plex pass container it has created a appdata folder in my Media share when I’ve changed NOTHING and all i did was update the container. How do I fix this? It was all on my cache drive until this update Sent from my iPad using Tapatalk
  20. Hi guys I have two of my AIO fans (3pin) connected to CHA_FAN1 and CHA_FAN2 the fans can be controlled but I am wondering which would be the correct option here?
  21. Sure thing here you go, #!/bin/bash time lftp << EOF set ssl:verify-certificate no set sftp:auto-confirm yes open sftp://user:password@host.com mirror --use-pget-n=8 --Remove-source-dir /home/user/downloads/deluge/LFTP/"4K Movies"/ /mnt/cache/Downloads/incoming/"4K Movies" quit EOF chmod -Rv 770 /mnt/cache/Downloads/incoming/"4K Movies" chown -Rv nobody:users /mnt/cache/Downloads/incoming/"4K Movies" mv /mnt/cache/Downloads/incoming/"4K Movies"/* /mnt/disk3/Media2/"4K Movies" I also noticed that sometimes after say a reboot it seems LFTP will only work is I SSH into my seedbox and accept the KEY then LFTP will work again. Anyway to have my script do this automatically?
  22. I've got an LFTP bash script that is scheduled to run every 10 minutes, but I notice if it runs and it doesn't find anything to download from my seedbox the script just keeps running and running in the background. Is there a way to make it stop with a bit of code I can put in my script that will make unRaid say "Hey, I ran the script found nothing I'll abort and try again in 60 minutes"
  23. Just wanted to say thanks @ken-ji I got everthing setup the way i wanted it (inclding with Filebot) on my seedbox. Everything downloaded to my seedbox is now renamed, and then fetched by my LFTP script on my unraid box and then is put in it's appropriate folder :) I do have a question though. I setup a scheduled time for my LFTP script to run, but I notice it doesn't stop if it's not pulling anything from my seedbox. Is it possible to have the script run and if it doesn't find anything after say 5 minutes that the script aborts, then tries again in say 60 minutes?
  24. I managed to figure out how to run Filebot on my seedbox, and I finally have it doing what I want it to (kind of) filebot -script fn:amc --output "/home19/user/downloads/deluge/test2" --action hardlink -non-strict "/home19/user/downloads/deluge/test" Is it possible to run that via Filebot (or terminal) on my unRaid server instead of SSH'ing into my seedbox?
  25. I've had it on port 82 since early last year I think? I changed it back then because I think PiHole needed port 80 so I changed my unRaid to use :82. I would always login to the WebUI by going to http://unraidserver:82/Dashboard for example. I've not once had an issue accessing the webUI until this morning and it looked like Community Apps was the culprit from my troubleshooting by getting rid of plugins one by one, and the server only started working again (out of safe mode) when the CA plugin was deleted as it was the very last one left to be deleted. Is this something you've heard of happening before? Like i said I got a very basic setup atm so nothing that it out of the ordinary. Or maybe it was just one of those things where something borked and it corrupted Community Apps maybe?