danktankk

If its a matter of a WebServer... I'd much rather install that than another container that is otherwise useless. At least the WebServer can do something for me besides doll up text...

Thank you for your reply. To a layperson, your explanation would probably seem incomplete - or completely plausible depending on the level of rabbit hole depth. However, UNRAID is one system. If there are two versions of templates for the one UNRAID server - well by all means, use the one that works! This is over my head for a reason I am sure, lol. This just seems silly if one version works and the other one doesnt. I read @thelamer post, however, regardless of him being right or wrong, then why does one flavor of this work and one doesnt - both in UNRAID. - Obviously no disrespect from my noticable lack of knowledge, but for me, this seems fixable without NC.

They have updated their software I think 2ce now? Im using 18.03 and onlyoffice still doesnt work without having to use a separate container. I do know that there are containers that do work in unraid as I posted in their thread accidentally, but it isnt the same apparently. I dont have a good enough knowledge base to understand why one will work and this one wont. I also dont understand if one works and one doesnt, how can it be problem with nextcloud? Its not world ending to not have this working, but it is annoying as it would be for anyone that doesn't want to add yet another container for functionality. Please do not misconstrue this as blame or pointless harsh rhetoric. Im just not knowledgeable to understand why it doesnt work currently.

Thank you. I will post there. Sent from my SM-G950U using Tapatalk

When i linked from the plugin, it brought me to this thread. Where do I need to ask about this? Sorry for posting in the wrong place.

Granted I am using UNRAID 6.8.3 with UNRAID NVidia, but I am using this plugin and it seems to be working fine, however, there is always this at the bottom of my screen. Any ideas how to get this to go away? Could this be because this plugin isnt supported for my version of unraid? Thanks for any ideas or suggestions.

I will gladly take that explanation and wait for a fix. I was sitting here thinking I had not done something right. Thank you very much. I did see where I could have added the container and all that in spaceinvaderones video, but i thought it was excessive and not necessary when nextcloud? needs to fix this. Or perhaps unraid? I simply dont know where the problem lies. Nextcloud has had several updates that I have applied myself (18.0.2 currently )and this still isnt working. I dont want to add more containers unnecessarily as i am sitting on plenty. Is there an ETA on when this will be corrected on their end? Again thank you for this explanation.

I am also having this silly error message that seems to be plaguing many people as well: ONLYOFFICE cannot be reached. Please contact admin. I am using 18.02 and I followed spaceinvaderones video where he was under the impression that there was no 'fix' and that nextcloud needed to release a correction. Im no expert either way so I am not prepared or even wanting to assign blame anywhere but it seems his explanation may not be completely accurate if there are people that have this working. I just need to know how to once and for all correct this error so that I can get this done. I have both onlyoffice and document server installed/enabled within this container. I am using the linuxserver/nextcloud container and it is updated to todays date 03/18/2020. I have the Document Editing Service address set as: https://my.https.domain/apps/documentserver_community/ I also have the config.php file setup properly as well afiak: 'trusted_domains' => array ( 0 => '192.168.1.50:444', 1 => 'my.https.domain', ), 'dbtype' => 'mysql', 'version' => '18.0.2.2', 'overwrite.cli.url' => 'https://my.https.domain/', 'overwritehost' => 'my.https.domain', 'overwriteprotocol' => 'https', 'trusted_proxies' => array ( 0 => 'letsencrypt', 1 => '192.168.1.50', ), 'forwarded_for_headers' => array('HTTP_X_FORWARDED_FOR'), 'filesystem_check_changes' => 1, What on earth do I need to do to get this working? I have been trying for a long time to get this right. Thank you VERY MUCH for any help at all and totally sorry if this has been covered somewhere else or numerous times. I didnt see it. 😕

Does it matter that much about the container to where you wont even try to help? Sent from my SM-G950U using Tapatalk

I am also having this silly error message that seems to be plaguing many people as well: ONLYOFFICE cannot be reached. Please contact admin. I am using 18.02 and I followed spaceinvaderones video where he was under the impression that there was no 'fix' and that nextcloud needed to release a correction. Im no expert either way so I am not prepared or even wanting to assign blame anywhere but it seems his explanation may not be completely accurate if there are people that have this working. I just need to know how to once and for all correct this error so that I can get this done. I have both onlyoffice and document server installed/enabled. I am using the linuxserver/nextcloud container. I have the Document Editing Service address set as: https://my.https.domain/apps/documentserver_community/ I also have the config.php file setup properly as well afiak: 'trusted_domains' => array ( 0 => '192.168.1.50:444', 1 => 'my.https.domain', ), 'dbtype' => 'mysql', 'version' => '18.0.2.2', 'overwrite.cli.url' => 'https://my.https.domain/', 'overwritehost' => 'my.https.domain', 'overwriteprotocol' => 'https', What on earth do I need to do to get this working? I have been trying for a long time to get this right. Thank you VERY MUCH for any help at all

much appreciated. installed without any issues.

I have a few errors that I have been unable to troubleshoot/fix: This is one. I renamed my VM, but that went fine after I changed the VM folder name, then pointed the VM config to the newly named folder and image.. and then I easily renamed the VM without any issues. This message persists. Im not entirely sure the VM rename was the cause of this. Feb 28 18:59:30 UNRAID kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] this is another one that keeps writing to the log. No idea.... Feb 28 19:00:24 UNRAID kernel: pcieport 0000:00:03.4: AER: Corrected error received: 0000:00:00.0 Feb 28 19:00:24 UNRAID kernel: pcieport 0000:00:03.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) Feb 28 19:00:24 UNRAID kernel: pcieport 0000:00:03.4: device [1022:1453] error status/mask=00001000/00006000 And this is in red in the unraid log. When I look to see what the device ID is, its several GPP bridges. Again.. No idea... If anyone has had these issues and knows how to fix or what I need to do to start troubleshooting. Fire away! Thanks for any help at all UNRAID-diagnostics-20200228-1933.zip

Is the issue with community document server still there or is there a fix for it now? I looked around but havent seen anything. I do realize that spaceinvaderone's video goes on to explain how to get it working by adding another container and whatnot, but I dont want to add another container for something that should be fixed soon (i hope?) by the nextcloud devs or wherever the problem lies. I am just curious if the actual problem is being addressed, or already has?

Sounds good. Thanks again.

Thank you. Will check it out now I am seeing this: Looks like there should be images on the left but I am not seeing them and nothing is coming up in the graph. I dont know what the graph should look like so thats why I am posting this here. On the plus side, it does appear to install without error. ______________________________ Looks like I just needed to wait about 5 minutes for it to poll the data and add it. Works fine! Thank you!

Derp, works fine, haha! Just right click and hit `extract now` Many thanks for the help! Is there any reason to reverse proxy this? If so, I dont see a config file anywhere for it.

It was indeed a rar5 file. Thank you for the point in the right direction! Is there a way to reset the attempt to autoextract now that I have the appropriate files added to jdownloader2?

I read through this thread and saw that this container should auto extract with no additional help. Mine is giving an error as well. The end of the extraction log says: ```1581795300047 - Start unpacking of /output/myfile/myfile.rar 1581795300047 - (DownloadLinkArchiveFile)File:/output/myfile/myfile.rar|FileArchiveFileExists:true|FileSize:934259614 1581795300047 - Prepare 1581795300049 - Failed``` Is there anywhere else I need to look to get the logs to figure out why it is giving an error for autoextract? Thanks for any help!

@dorgansounds good man, thank you. @pluginCopI havent ever used it, so this isnt an upgrade issue (at least for me). Im sure it will be handled soon enough and im sure we can all patiently wait for this.

Same problem here as well: Wrong 'vnstat-2.4-x86_64-1_slonly.txz' package md5 hash. plugin: run failed: /bin/bash retval: 1

Fair enough. Ill increase the docker size and move on. Thank you!

@jonp Thank you for the reply! This is the amount of space it is currently reporting: All containeras added up is 15.6GB or so: however, I am still seeing this usage and getting notifications often: If the amount scrubbed is 22.16GB, it does make sense that it would report, and does report 75-80% usage. Is there any reason for this discrepancy (15.6GB vs 22.1GB you can think of? Thanks again for the input.

My docker size is still an issue. This should not be that difficult to figure out. lol If there was a new feature to be requested for unraid, it would be a new mechanism to show precisely what docker containers have what and where the space usage is increasing. In windows this is extremely easy to do. Thanks again for the help thus far.

Hey, Thanks for the reply. I dont see anything here that would indicate an issue either. This is what I got from running the script:

My docker image has also been increasing for a while. This is what I am seeing based on the prior thread suggestions: root@baconator:~# du -h -d 1 /var/lib/docker/ 1.2M /var/lib/docker/containerd 93M /var/lib/docker/containers 0 /var/lib/docker/plugins 99G /var/lib/docker/btrfs 42M /var/lib/docker/image 120M /var/lib/docker/volumes 0 /var/lib/docker/trust 208K /var/lib/docker/network 0 /var/lib/docker/swarm 16K /var/lib/docker/builder 56K /var/lib/docker/buildkit 1.4M /var/lib/docker/unraid 0 /var/lib/docker/tmp 0 /var/lib/docker/runtimes 99G /var/lib/docker/ 99GB docker file?? lol My docker is supposed to be 30GB (see below) I also performed a scrub as well. I dont think it is log files: Just like everyone else, nothing in these show anything anywhere near 30GB. I have tried to truncate logs and that didnt do much either by using the following: truncate -s 0 /var/lib/docker/containers/*/*-json.log I did see this in Cadvisor though: Any ideas? This is highly frustrating. Thanks for any help.