trurl Posted September 9, 2021 Share Posted September 9, 2021 1 hour ago, Gsusking2 said: backplane might have fried them Make sure you don't have a molex plugged in backwards. Seems impossible but it has happened. Quote Link to comment
Gsusking2 Posted September 9, 2021 Author Share Posted September 9, 2021 7 minutes ago, trurl said: Make sure you don't have a molex plugged in backwards. Seems impossible but it has happened. Yes I have tried that. I have 2 chassis and a lot of spare external hba and internal hba. so I have tried the disks across 2 chassis with the same problems on the same disks. more disks show up on my spare chassis so it has lead me to believe it is a backplane problem with the norco 4024 chassis. Quote Link to comment
Gsusking2 Posted September 9, 2021 Author Share Posted September 9, 2021 1 hour ago, JorgeB said: You can do a new config to keep the data in the remaing data drives. Ok. I’m gonna test the drives one last time on a driver reader that I bought from Amazon. From there I will ask you how to do the new config. I want to say I appreciate everything and everyone in this forum. It’s really great how you guys help us newbs Quote Link to comment
Gsusking2 Posted September 13, 2021 Author Share Posted September 13, 2021 On 9/9/2021 at 9:43 AM, JorgeB said: You can do a new config to keep the data in the remaing data drives. can you tell me how to do that? Quote Link to comment
JorgeB Posted September 13, 2021 Share Posted September 13, 2021 Tools -> New config Then just re-assign the remaining drives, parity will need to be synced. 1 Quote Link to comment
Gsusking2 Posted September 13, 2021 Author Share Posted September 13, 2021 9 hours ago, JorgeB said: Tools -> New config Then just re-assign the remaining drives, parity will need to be synced. I will only have one parity drive. Since one of my parity drives is 'missing/dead' Also I am still having the original problem of the Red X on drive 1 and 9, Both are present before i start the array. Can these also be repaired? or will they be emulated from the one pairty? Quote Link to comment
JorgeB Posted September 13, 2021 Share Posted September 13, 2021 36 minutes ago, Gsusking2 said: Also I am still having the original problem of the Red X on drive 1 and 9, Both are present before i start the array. Only if the actual disks are OK, any emulated disks will be gone after a new config. Quote Link to comment
Gsusking2 Posted September 13, 2021 Author Share Posted September 13, 2021 29 minutes ago, JorgeB said: Only if the actual disks are OK, any emulated disks will be gone after a new config. Ok when doing new config do I “preserve any current assignments” ? again I really appreciate your help Quote Link to comment
itimpi Posted September 13, 2021 Share Posted September 13, 2021 9 minutes ago, Gsusking2 said: Ok when doing new config do I “preserve any current assignments” ? again I really appreciate your help That is optional as long as you end up with the correct assignments before starting the array I normally recommend using it to minimise the number of changes required when you return to the Main tab thus reducing the chances of making an error in the assignments. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.