exist2resist Posted July 3, 2021 Share Posted July 3, 2021 (edited) Keep getting errors on my buddies cache drives. Have two 500GB WD Blue 3D nand drives in a cache pool. (two WDC_WDS500G2B0A) I can download a few episodes and movies, but then sab errors out with corrupt rar and the log gets filled with the following: Jul 2 21:18:34 Sarlacc kernel: BTRFS error (device sdd1): bdev /dev/sdd1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 Jul 2 21:18:34 Sarlacc kernel: BTRFS warning (device sdd1): csum failed root 5 ino 2257 off 48537600 csum 0x5736f319 expected csum 0xa47db278 mirror 1 Drives pass the extended SMART check. When I wipe the cache pool and restart from scratch back to square one, it can download a few shows/movies and then the log gets filled with the above again. When I invoke the mover I get the following error: Jul 2 21:45:33 Sarlacc kernel: BTRFS error (device sdd1): bdev /dev/sdd1 errs: wr 0, rd 0, flush 0, corrupt 21, gen 0 Jul 2 21:45:33 Sarlacc move: move_object: /mnt/cache/TV SHOWS/Ash vs Evil Dead/Season 1/ash.vs.evil.dead.s01e04.1080p.bluray.x264-rovers-BUYMORE.mkv Input/output error Hardware: Model: Custom M/B: ASUSTeK Computer INC. SABERTOOTH 990FX Version Rev 1.xx - s/n: 112696470001160 BIOS: American Megatrends Inc. Version 0705. Dated: 08/22/2011 CPU: AMD FX™-8120 Eight-Core @ 3100 MHz HVM: Enabled IOMMU: Disabled Cache: 640 KiB, 16 MB, 8 MB Memory: 16 GiB DDR3 Multi-bit ECC (max. installable capacity 32 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 5.10.21-Unraid x86_64 Any ideas? sarlacc-diagnostics-20210702-2153 (2).zip Edited July 8, 2021 by exist2resist Add diagnostic Quote Link to comment
JorgeB Posted July 3, 2021 Share Posted July 3, 2021 Data corruption is being detected, start by running memtest. Quote Link to comment
ChatNoir Posted July 5, 2021 Share Posted July 5, 2021 On 7/3/2021 at 3:33 AM, exist2resist said: Any ideas? Any result on your memtest ? Quote Link to comment
exist2resist Posted July 5, 2021 Author Share Posted July 5, 2021 3 hours ago, ChatNoir said: Any result on your memtest ? Doing that tonight, didn't have time this weekend had to pick up some more server hardware. Quote Link to comment
exist2resist Posted July 6, 2021 Author Share Posted July 6, 2021 On 7/5/2021 at 11:26 AM, ChatNoir said: Any result on your memtest ? Looks like memory, buddy put the RAM sticks in B1 and B2 slots. Asked him to move them to A1 and A2, and run memtest again. Quote Link to comment
JonathanM Posted July 6, 2021 Share Posted July 6, 2021 2 hours ago, exist2resist said: Looks like memory, buddy put the RAM sticks in B1 and B2 slots. Asked him to move them to A1 and A2, and run memtest again. Manual recommends A2 B2 https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM3+/SABERTOOTH_990FX_GEN3_R2.0/E8041_SABERTOOTH_990FX_GEN3_R2.pdf#p22 Quote Link to comment
exist2resist Posted July 8, 2021 Author Share Posted July 8, 2021 He picked up a new mobo, cpu, and RAM. He will be using the old one for an Arcade machine. Solved for now. On 7/6/2021 at 5:31 PM, jonathanm said: Manual recommends A2 B2 https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM3+/SABERTOOTH_990FX_GEN3_R2.0/E8041_SABERTOOTH_990FX_GEN3_R2.pdf#p22 Thanks for this. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.