Chester Posted July 13, 2021 Share Posted July 13, 2021 (edited) Hey folks: I tried to do a manual update to 6.9.2, and am now having boot issues. I have worked through the troubleshooting page on the wiki but am stuck. Here is the process I followed - connect the flash drive to a PC/Mac make a backup of the flash drive in case you want to be able later revert download the zip of the release you want to use from the unRaid download page extract all the bz* type files overwriting the ones on the flash drive After attempting to boot - it first seemed that SysLinux became corrupted and was kicking out a no config file error. (Opening the folder in windows showed gibberish, and odd file names, so I am assuming the config file error relates to SysLinux anyway.) So I also copied a new version SysLinux directory on the flash drive. Now boot appears normal, but stops at a system login (both in the headless, GUI boot, and safe options). It does not connect to the local network and I am unable to ping the device or reach the GUI. (I entered root as the user name, and it shows a root linux prompt). What are my next steps? The good news (I think) is that I have a good copy of the config directory that was working this afternoon. I was going to try a new flash drive - and copy over the existing config file, but wanted to ask the pros first. Thanks! Edited July 14, 2021 by Chester solved Quote Link to comment
JorgeB Posted July 13, 2021 Share Posted July 13, 2021 Try recreating the flash drive, then restore only the config folder from the backup. Quote Link to comment
Chester Posted July 13, 2021 Author Share Posted July 13, 2021 4 hours ago, JorgeB said: Try recreating the flash drive, then restore only the config folder from the backup. Ok - I may have used the wrong process. I restored the files to the drive and ran the make bootable application as admin (Windows). I then replaced the config file. No joy. Should I format the drive and start fresh? Or try the flash drive making tool? Quote Link to comment
JorgeB Posted July 13, 2021 Share Posted July 13, 2021 11 minutes ago, Chester said: Should I format the drive and start fresh? Yes, recreate the flash drive, manually or using the tool. Quote Link to comment
Chester Posted July 13, 2021 Author Share Posted July 13, 2021 Ok - I reformatted the drive. Ran the make bootable file, and then replaced the config file. Still no change. I'll have more time tonight to mess with it. I did notice that 6.9.2 appears to have a plugin folder, while my config folder has a file. Quote Link to comment
JorgeB Posted July 13, 2021 Share Posted July 13, 2021 You can also try booting an earlier release just to make sure it's not that, if it also doens't boot try a different flash drive. Quote Link to comment
itimpi Posted July 13, 2021 Share Posted July 13, 2021 1 hour ago, Chester said: did notice that 6.9.2 appears to have a plugin folder, while my config folder has a file. It should be a folder on all releases so it sounds as if your config folder backup is corrupt Quote Link to comment
Chester Posted July 13, 2021 Author Share Posted July 13, 2021 all right. it looks like I need to try a clean flash install. the troubleshooter says copy the key file. what is this filed named? if I can boot it with a clean flash install - I will not lose data provided I do not assign drives right? assuming I can get that far - how do I recover the arrays? The troubleshooting docs seem to be a work in process there. I am assuming that I will need to assign drives at some point, but want to tread lightly. Quote Link to comment
itimpi Posted July 13, 2021 Share Posted July 13, 2021 1 hour ago, Chester said: the troubleshooter says copy the key file. what is this filed named? It normally resides in the config folder on the flash and has a .key extension. 1 hour ago, Chester said: assuming I can get that far - how do I recover the arrays? The troubleshooting docs seem to be a work in process there. I am assuming that I will need to assign drives at some point, but want to tread lightly. Do you know which drives are parity drives? The key thing is not to assign any data drives to parity as this would destroy the contents. If you are not sure then this section of documentation gives a procedure you can use. Quote Link to comment
Chester Posted July 14, 2021 Author Share Posted July 14, 2021 work in progress. Good news is that I was able to recover the drives after some trial and error in the config file. (I thought I had it running, but the array would not start). Ultimately I did a clean flash install with the existing flash drive. Appreciate the help. Remaining issues: 1. For some reason, the license is MIA. I thought I copied it to the config file. (Same flash drive as before). This could be user error. 2. A lot of weird docker / plug in errors, and Community Applications cannot be loaded even with the fresh install. (The only plug-in I had loaded was Pihole). 3. Is there an easy way to assign a new fixed IP? The box grabbed a random IP when it finally booted - so now I have to remap all my other computers. The IP info is grayed out in settings. If someone can help, it would be appreciated, but I can start another thread if needed. These appear to be docker errors. Warning: parse_ini_file(/boot/config/docker.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 50 Warning: array_replace_recursive(): Expected parameter 2 to be an array, bool given in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 50 Warning: parse_ini_file(/boot/config/domain.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix.vm.manager/include/libvirt_helpers.php on line 478 Quote Link to comment
trurl Posted July 14, 2021 Share Posted July 14, 2021 21 minutes ago, Chester said: Is there an easy way to assign a new fixed IP Best way is to reserve IP by MAC address in the router and let other things like your server use DHCP to get that reserved IP. Quote Link to comment
trurl Posted July 14, 2021 Share Posted July 14, 2021 23 minutes ago, Chester said: For some reason, the license is MIA. I thought I copied it to the config file. config is a folder, not a file. Since you have called it a file several times now I wonder if you have the config folder. Quote Link to comment
Chester Posted July 14, 2021 Author Share Posted July 14, 2021 I added the license to the config folder. Quote Link to comment
Chester Posted July 14, 2021 Author Share Posted July 14, 2021 After replacing with a fresh flash drive - it appears to run normally. Only issue is and error replacing the pi-hole app. Appears to be returning an error from prior config. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.