offroadnut Posted August 25, 2021 Share Posted August 25, 2021 (edited) First time building a server (learning computers) with help from a friend, we built it at his house and we had problems getting the computer to boot before installing the Unraid flash drive. When i took it home two days ago, i pulled the battery on the MB, cleared CMOS per supermicro instructions and restarted it and it booted to the bios. I assumed I was good to go, I made and installed the unraid flash drive using the creator tool and started it up and it booted up unraid. Now on to my problem, for the first 15 min or so I was in the webui just going through basic settings based off spaceinvader suggestions and starting preclear my disks, I clicked back to main tab and my browser reloaded and said could not connect to site. Tried reloading the site ( I have the ip addy from my router) and would not connect to the server. I left it that way last night. today after work I check it and same issue so I restarted it and can get right in once it's up and running. started preclear again, and then when click back on main tab, same thing happened again. This is all happening with in 15-40 min of start up. I have no idea whats going on or how to fix it as i'm still a somewhat novice. As additional info, this happens using my linix mint laptop and my wifes W10 machine. I think i correctly downloaded the syslogs from yesterday and today. Also server is using IP address assigned by my router 192.168.1.111, everytime i restart the server I use the same address to access the webgui, no issues with anything else on my LAN Any help is greatly appreciated build is, Fractal node 804 Supermicro C7Z97-M-O Motherboard Intel Core I74790K CPU Corsair Vengence 1600 MH memory 32GB 4x8 EVGA 650SF power supply 4 WD shucked 8TB drives 2 WD Blue SSD drives 500GB offroadnut-syslog-20210825-0028.zip offroadnut-syslog-20210825-0111.zip Edited August 25, 2021 by offroadnut Quote Link to comment
trurl Posted August 25, 2021 Share Posted August 25, 2021 Syslog is in RAM like the rest of the OS, so it resets on reboot, and both of those are immediately after reboot so don't show any problem. We prefer Diagnostics (which includes syslog) instead of just syslog most of the time anyway. I often won't even examine syslog until I look at other things in Diagnostics to give me some idea about your configuration and what to look for in syslog. https://wiki.unraid.net/Manual/Troubleshooting#Capturing_Diagnostic_Information Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Syslog by itself can be useful if it is captured before crash, but you have to configure Syslog Server to save it somewhere. https://wiki.unraid.net/Manual/Troubleshooting#Persistent_Logs_.28Syslog_server.29 Quote Link to comment
trurl Posted August 25, 2021 Share Posted August 25, 2021 From your description might be a problem with flash disconnecting. You should boot from a USB2 port. Quote Link to comment
offroadnut Posted August 25, 2021 Author Share Posted August 25, 2021 And for my next trick if i did this right, my apologies if wrong, some of this is greek to me. Very grateful for the assistance. offroadnut-diagnostics-20210824-2008.zip Quote Link to comment
offroadnut Posted August 25, 2021 Author Share Posted August 25, 2021 Also, the flash drive was in the 2.0 (white tab) usb slot, just did it again so I restarted it and placed the usb in the other 2.0 slot Quote Link to comment
offroadnut Posted August 25, 2021 Author Share Posted August 25, 2021 Bumping to the top. Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 Any advice with the log I posted above? talking to a friend he thinks since the server is not shutting off it may be going to sleep? not sure what to look at to check Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 Just did it again after being up on 15 min or so, with the display hooked up it was blank, any key I hit would not wake up server. Attached new log this time the save to flash setting was on. Any help appreciated I don't have any ideas on what to do. offroadnut-diagnostics-20210825-1902.zip Quote Link to comment
trurl Posted August 26, 2021 Share Posted August 26, 2021 3 minutes ago, offroadnut said: save to flash setting was on Diagnostics only includes the current syslog from RAM. You have to get the saved one and post it. Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 where / how do i get that? Quote Link to comment
trurl Posted August 26, 2021 Share Posted August 26, 2021 You said you set it up to save to flash. From that wiki I linked earlier: Quote the syslog will be mirrored to the logs folder/directory of the flash drive Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 Ok, I think I got it, my apologies for all the questions, still learning. Not sure if this help but right now the server has been up just over an hour (longest yet), I made no changes, just this time I did not start pre clearing disks(4 Spinners only), all other times it would sleep/crash what ever I was clearing disks Grateful for the help. offroadnut-diagnostics-20210825-1902(1).zip Quote Link to comment
ChatNoir Posted August 26, 2021 Share Posted August 26, 2021 There should be a file named 'syslog' in the /logs/ directory of your flashdrive. Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 Thank you, this should be it. syslog Quote Link to comment
offroadnut Posted August 26, 2021 Author Share Posted August 26, 2021 Is there a way took look in the files of the flash and see if I selected UEFI boot when I created it, asking only because now I don't remember if I selected it? Quote Link to comment
itimpi Posted August 26, 2021 Share Posted August 26, 2021 3 minutes ago, offroadnut said: Is there a way took look in the files of the flash and see if I selected UEFI boot when I created it, asking only because now I don't remember if I selected it? Look on the flash drive for an EFI folder. If it has a trailing ~ character then UEFI boot is not enabled, and simply removing the trailing ~ character enables it. I am not sure why the UEFI boot option is not always enabled I would have thought that is a motherboard did not support that mode it would simply ignore the folder, but I guess I could be missing something Quote Link to comment
offroadnut Posted August 28, 2021 Author Share Posted August 28, 2021 I'm not sure if solved or not, as of right now this past thursday when I restarted the server I only selected two disks to preclear versus all 4 8tb drives, since then it has been up and running. But since I don't know what caused it to lock up I don't trust it. Can anyone look at the last log I posted on thursday and see what the problem may be? Right now it is finishing up reading the last disk, the other 3 precleared fine. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.