Ziga Posted August 29, 2021 Share Posted August 29, 2021 Hi, could you please help me? My server seemed to crash... all i did was i downloaded a torrent and opened in Plex. Should i just reboot it? abazuu-diagnostics-20210829-1150.zip abazuu-syslog-20210829-0948.zip Quote Link to comment
JorgeB Posted August 29, 2021 Share Posted August 29, 2021 Flash drive dropped offline: Aug 29 10:20:12 Abazuu kernel: usb 2-5: USB disconnect, device number 2 Aug 29 10:20:12 Abazuu kernel: xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. Aug 29 10:20:12 Abazuu kernel: sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 cmd_age=0s Aug 29 10:20:12 Abazuu kernel: sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 07 9f b9 00 00 1f 00 Aug 29 10:20:12 Abazuu kernel: blk_update_request: I/O error, dev sda, sector 499641 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0 Aug 29 10:20:12 Abazuu kernel: blk_update_request: I/O error, dev sda, sector 499642 op 0x0:(READ) flags 0x80000 phys_seg 30 prio class 0 Aug 29 10:20:12 Abazuu kernel: blk_update_request: I/O error, dev sda, sector 499641 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Try a different USB port, ideally USB 2.0. Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 (edited) Turn off machine before doing it? Edited August 29, 2021 by Ziga Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 I am trying to stop the array and shut dow, but it seems like it's stuck at stopping array? for like 10 minutes now.. Quote Link to comment
JorgeB Posted August 29, 2021 Share Posted August 29, 2021 You'll likely need to force it. Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 1 minute ago, JorgeB said: You'll likely need to force it. Sorry, i am a bit newbie and i have questions forcing by pressing and holding physical power button or should i try with button shut down in unraid before? thanks for hehlping me! Quote Link to comment
itimpi Posted August 29, 2021 Share Posted August 29, 2021 2 minutes ago, Ziga said: Sorry, i am a bit newbie and i have questions forcing by pressing and holding physical power button or should i try with button shut down in unraid before? thanks for hehlping me! Force it using the power button. Since the flash drive has dropped offline UnRaid will not be able to update it to say you successfully stopped the array so it is likely to start an automatic parity check on next array start. Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 (edited) Hooray, it seems it's back? moved USB stick to another port. Why is USB 2.0 preferred? So now should i just click start? (Write corrections to parity is checked). Does that mean that my previous usb port is broken now? Edited August 29, 2021 by Ziga Quote Link to comment
itimpi Posted August 29, 2021 Share Posted August 29, 2021 41 minutes ago, Ziga said: moved USB stick to another port. Why is USB 2.0 preferred? So now should i just click start? (Write corrections to parity is checked). Because USB2 seems to be far more reliable, and Unraid gains no significant performance advantage as after initial load UnRaid runs from RAM. Quote Link to comment
trurl Posted August 29, 2021 Share Posted August 29, 2021 4 hours ago, Ziga said: (Write corrections to parity is checked). You will likely need to correct some parity errors due to unclean shutdown, but you don't want it to do that until you have verified everything is working well. I would just do non-correcting parity check, and if number of sync errors is very large then you need to figure out why before really correcting parity. Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 90 minutes till the end of parity checking. Ive noticed that also my VM tab is gone? If i go under settings and vm manager, vms are disabled? Will this change after parity check? Has anything happened to Unraid today? A friend of mine got pool disk disabled (with errora) ... also today. Weird. I'll report after checking is done. Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 Does that mean im good to go? I still didnt have VM tab, but i enabled it in settings and now server looks the same as it was. Do i have to do anything else? I would really like to thank you guys for all the advices and guide how to solve this!! Quote Link to comment
Ziga Posted August 29, 2021 Author Share Posted August 29, 2021 (edited) Here it is. Forgot to paate screenshot at previous post sorrry abazuu-diagnostics-20210829-2230.zip Edited August 29, 2021 by Ziga Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.