Kameleon83 Posted January 25, 2022 Author Share Posted January 25, 2022 On 1/16/2022 at 11:23 PM, Exes said: Keep getting this when accessing the web gui. I removed my IP and put <IP> instead This page isn’t working <IP> didn’t send any data. ERR_EMPTY_RESPONSE Here's my docker json if you want it docker.json 99.79 kB · 0 downloads Hello, could you please explain more? Quote Link to comment
Unraid-arr Posted January 25, 2022 Share Posted January 25, 2022 On 1/16/2022 at 2:47 AM, Kameleon83 said: I added a TITLE variable to change the title of the page. By default, I left Docker WebUI. I also changed the description on page 1. I hope it will be newer understandable on how to use the variables. If you want to see newer, go to the BitBucket Thanks for the update, much appreciated. Regarding the Host and Unraid_IP - From comments I am not sure if the description is clear for other folks, but I am able to get it now. Have a good day! Cheers! Quote Link to comment
Kameleon83 Posted January 25, 2022 Author Share Posted January 25, 2022 2 minutes ago, Shomil Saini said: Thanks for the update, much appreciated. Regarding the Host and Unraid_IP - From comments I am not sure if the description is clear for other folks, but I am able to get it now. Have a good day! Cheers! You're welcome. If you have a proposal for an explanation, then I'd be happy to have some help. I'm French and it's not always easy to translate from technical French to natural English. A very good day to you too. Cheers Quote Link to comment
Exes Posted January 25, 2022 Share Posted January 25, 2022 5 minutes ago, Kameleon83 said: Hello, could you please explain more? This is what I see when I open the web gui Quote Link to comment
Exes Posted February 21, 2022 Share Posted February 21, 2022 Any update on this issue? Quote Link to comment
Unraid-arr Posted March 3, 2022 Share Posted March 3, 2022 On 1/25/2022 at 1:25 PM, Kameleon83 said: You're welcome. If you have a proposal for an explanation, then I'd be happy to have some help. I'm French and it's not always easy to translate from technical French to natural English. A very good day to you too. Cheers Hey, Sorry for the late response, per my understanding you are using UNRAID_IP to match in the docker container's webui link and if it matches you replace it with DNS/DYNDNS so it works if I have a hostname (Ex: unraid.duckdns.org) mapped so it works across networks/internet. If the url for ui does not match the UNRAID_IP you know it is a separate ip for host so you do not change the path to webui which restricts it to LAN only. I am not a native english speaker myself, but I hope this explaination helps someone. Hopefully I am correct in assuming what is going on in the code. Cheers! Quote Link to comment
Unraid-arr Posted March 3, 2022 Share Posted March 3, 2022 On 1/25/2022 at 2:19 PM, Exes said: This is what I see when I open the web gui Try opening in Incognito mode or clear cache etc. set the DNS/DYNDNS and UNRAID_IP variables correctly. If that dont work try deleting the container and removing the image and reinstall fresh. Hope that helps. Cheers! Quote Link to comment
Exes Posted March 3, 2022 Share Posted March 3, 2022 (edited) On 3/3/2022 at 12:29 PM, Shomil Saini said: Try opening in Incognito mode or clear cache etc. set the DNS/DYNDNS and UNRAID_IP variables correctly. If that dont work try deleting the container and removing the image and reinstall fresh. Hope that helps. Cheers! That didn't worl k either. I've tried uninstalling it and reinstalling it. Incognito doesn't work (tried on another computer as well my phone). Tried changing the ports. I ended up setting up a new unraid server and the Docker Web-Gui works fine on that. Is there a config directory that it has? Also, not sure if it helps, but Firefox told me this Edited March 9, 2022 by Exes typo Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 hello i wanted give the container its own ip so i can give it an DNS entry in my Network. Problem is as soon as i do that the port is changet from 1111 to 8080. Not that it matters mutch scince i want it to move to port 80 how ever i did not found a way. i also have no idea about docker i am quit new in that regard. is ter anyway to modifiy your container or move the port to port 80 Quote Link to comment
Kameleon83 Posted May 7, 2022 Author Share Posted May 7, 2022 5 minutes ago, lhw1221 said: hello i wanted give the container its own ip so i can give it an DNS entry in my Network. Problem is as soon as i do that the port is changet from 1111 to 8080. Not that it matters mutch scince i want it to move to port 80 how ever i did not found a way. i also have no idea about docker i am quit new in that regard. is ter anyway to modifiy your container or move the port to port 80 Hello, You normally have a parameter that allows you to change this. Quote Link to comment
Squid Posted May 7, 2022 Share Posted May 7, 2022 7 minutes ago, Kameleon83 said: You normally have a parameter that allows you to change this. He wants to know if the container port can be changed from 8080 to instead be 80 so that if it's on it's own IP address he doesn't need to append :8080 to the IP address in order to access it. IE: it listens on 80 instead of 8080 Is there a config file or something that dictates the internal listening port Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 (edited) 5 minutes ago, Kameleon83 said: Hello, You normally have a parameter that allows you to change this. that dose not work As soon as i switch network type this option dose not do anything whit the switching it also switsches to port 8080 automaticly Edited May 7, 2022 by lhw1221 Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 (edited) i also might add that i figurd out why it dose switch cause the "Port mapping only applies to bridge network" i was tollt. This means i wold have to switch the configuration inside the container and i have no clue how i do that. Edited May 7, 2022 by lhw1221 Quote Link to comment
Kameleon83 Posted May 7, 2022 Author Share Posted May 7, 2022 17 minutes ago, lhw1221 said: i also might add that i figurd out why it dose switch cause the "Port mapping only applies to bridge network" i was tollt. This means i wold have to switch the configuration inside the container and i have no clue how i do that. By default the internal port is 8080. I'll change it right away. You should have an update of the container in a few minutes. Quote Link to comment
Squid Posted May 7, 2022 Share Posted May 7, 2022 1 minute ago, Kameleon83 said: By default the internal port is 8080. I'll change it right away. You should have an update of the container in a few minutes. By doing that, you're going to stop anyone who updates from having access to it without also adjusting the template. Can you instead possibly create a config file that dictates which listening port it uses with a default of 8080? Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 38 minutes ago, Squid said: By doing that, you're going to stop anyone who updates from having access to it without also adjusting the template. Can you instead possibly create a config file that dictates which listening port it uses with a default of 8080? you sound like you know docker so i can´t edit it the person doing the reposetory ?? (just generl question Quote Link to comment
Kameleon83 Posted May 7, 2022 Author Share Posted May 7, 2022 I have added a PORT Variable that allows you to change the port of the application. Tell me if this works and is it ok? 1 Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 (edited) 13 minutes ago, Kameleon83 said: I have added a PORT Variable that allows you to change the port of the application. Tell me if this works and is it ok? okay i set it up i only hat to change the port in webUI Edited May 7, 2022 by lhw1221 Quote Link to comment
Squid Posted May 7, 2022 Share Posted May 7, 2022 26 minutes ago, lhw1221 said: you sound like you know docker so i can´t edit it the person doing the reposetory ?? (just generl question People would probably be shocked if they realize that I know nothing about actually building a container. What I do know about is the user experience related to installing / updating any given app. 19 minutes ago, Kameleon83 said: Tell me if this works and is it ok? Should be fine. 1 Quote Link to comment
lhw1221 Posted May 7, 2022 Share Posted May 7, 2022 All is working now thx again to you 2 ^^ 1 Quote Link to comment
paulodell Posted June 1, 2022 Share Posted June 1, 2022 Can you add a Fav Icon either default of Custom? This is a great way to go straight to a list of all my docker UIs, all it needs is an icon for when I bookmark it. Thanks! Quote Link to comment
Kameleon83 Posted June 1, 2022 Author Share Posted June 1, 2022 3 hours ago, paulodell said: Can you add a Fav Icon either default of Custom? This is a great way to go straight to a list of all my docker UIs, all it needs is an icon for when I bookmark it. Thanks! There is already a favicon on the web page. Quote Link to comment
paulodell Posted June 1, 2022 Share Posted June 1, 2022 Strange for me it is just this Quote Link to comment
paulodell Posted June 1, 2022 Share Posted June 1, 2022 I can see from Inspection that you have the bottom of the two lines below, some sources state you should have both: <link rel=“icon” href=”favicon.ico” type=“image/x-icon”> <link rel=“shortcut icon” href=“favicon.ico” type=“image/x-icon”> Quote Link to comment
Kameleon83 Posted June 5, 2022 Author Share Posted June 5, 2022 On 6/1/2022 at 3:52 PM, paulodell said: I can see from Inspection that you have the bottom of the two lines below, some sources state you should have both: <link rel=“icon” href=”favicon.ico” type=“image/x-icon”> <link rel=“shortcut icon” href=“favicon.ico” type=“image/x-icon”> Indeed, I saw that there was a problem. I just corrected it. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.