squeak750 Posted January 9, 2022 Share Posted January 9, 2022 (edited) OK like all of yall I was having the same and worse trouble. After actually reading everyone's comments and suggestions I have it working heres what i did. 1. hit show more settings and deleted 2nd WEBUI port 2. Changed my time zone to match my Unraid server. (I tried Fix 1 by itself and no results until time zone matched). 3. Changed PUID to 99 and PGID to 100 4. I was able to finally get into the config with the URL 5. Configured everything as I wanted and now I have the script sunning with no errors in my logs. Hope this helps Edited January 9, 2022 by squeak750 Quote Link to comment
Squid Posted January 9, 2022 Share Posted January 9, 2022 6 minutes ago, squeak750 said: hit show more settings and deleted 2nd WEBUI port There is no 2nd WebUI port. If you're running this in the default Bridge mode then that port definition which you deleted is required. If you've put it onto it br0 (and assigned a dedicated IP), then that port definition is ignored anyways. Quote Link to comment
KnifeFed Posted January 10, 2022 Share Posted January 10, 2022 22 hours ago, squeak750 said: OK like all of yall I was having the same and worse trouble. After actually reading everyone's comments and suggestions I have it working heres what i did. 1. hit show more settings and deleted 2nd WEBUI port 2. Changed my time zone to match my Unraid server. (I tried Fix 1 by itself and no results until time zone matched). 3. Changed PUID to 99 and PGID to 100 4. I was able to finally get into the config with the URL 5. Configured everything as I wanted and now I have the script sunning with no errors in my logs. Hope this helps It sounds like you're not using the actual CA template. It's named "plex-utills" but if you search for that, you won't get any results. You have to search for "plex utills", i.e. without the hyphen. Quote Link to comment
jkirkcaldy Posted January 10, 2022 Author Share Posted January 10, 2022 On 12/26/2021 at 4:49 PM, stianly said: 2021-12-26 17:46:42,181 - SYS - 4K/HDR Posters schedule created for 00:00 2021-12-26 17:46:42,181 - SYS - 4K/HDR Posters schedule created for 00:00 2021-12-26 17:46:43,314 - SYS - Updater: Your plexpath has been changed to / 2021-12-26 17:46:43,314 - SYS - Updater: Your plexpath has been changed to / 2021-12-26 17:47:53,138 - SYS - 4K/HDR Posters schedule created for 00:00 2021-12-26 17:47:53,138 - SYS - 4K/HDR Posters schedule created for 00:00 2021-12-26 17:47:54,358 - SYS - Updater: Your plexpath has been changed to / 2021-12-26 17:47:54,358 - SYS - Updater: Your plexpath has been changed to / 2021-12-26 17:47:57,474 - plex-utills - 4k Posters: 4k HDR poster script starting now. Exception in thread Thread-2: Traceback (most recent call last): File "/usr/local/lib/python3.9/threading.py", line 973, in _bootstrap_inner self.run() File "/usr/local/lib/python3.9/threading.py", line 910, in run self._target(*self._args, **self._kwargs) File "/app/app/scripts.py", line 544, in posters4k m = MediaInfo.parse(file, output='JSON') File "/usr/local/lib/python3.9/site-packages/pymediainfo/__init__.py", line 494, in parse raise FileNotFoundError(filename) FileNotFoundError: /filmsmovie4k/films2.Fast.2.Furious.2003.2160p.UHD.BluRay.REMUX.HDR.HEVC.DTS-X-EPSiLON.mkv what is happening? I am working on a fix for this now. It is due to the way some plex containers map their media at the root of the container so the script was swapping out the '/' for '/films' ther ewill be an update to address this in the next day or two. Quote Link to comment
Ynd21 Posted January 28, 2022 Share Posted January 28, 2022 On 1/10/2022 at 8:08 AM, jkirkcaldy said: I am working on a fix for this now. It is due to the way some plex containers map their media at the root of the container so the script was swapping out the '/' for '/films' ther ewill be an update to address this in the next day or two. Was there ever an update? Looks like its still broken Quote Link to comment
Adznon Posted May 31, 2022 Share Posted May 31, 2022 hey @jkirkcaldy Just seen you have pushed a new dev version. I'm getting this is the logs Also still getting the flowing in plex Is there anything that i have done incorrectly ? Quote Link to comment
jkirkcaldy Posted May 31, 2022 Author Share Posted May 31, 2022 No, That is an issue some people have had before. I'm still trying to understand why it happens as it can be difficult to reproduce. I'm testing something that may help with an update coming later today. Quote Link to comment
Adznon Posted May 31, 2022 Share Posted May 31, 2022 Great news, I was able to use this application a long time ago but it has never worked since. It always stops at a certain point and never finished going through the film library. Got very excited when i saw a new version Let me know if you need someone to test Thanks for continuing to support this. Quote Link to comment
Lonewolf147 Posted December 16, 2022 Share Posted December 16, 2022 If you have multiple libraries on Plex, like Movies, and Movies (Anime), how do I list those in the config? Are they comma separated? Or does PU only recognize one library per type? Quote Link to comment
Cau5tic Posted February 19, 2023 Share Posted February 19, 2023 Amazing util- thanks for making this available! I just recently updated the docker on Unraid and went to the main web page and hit migrate. Everything was working last time I checked it on the old version. Now when it comes up I see error messages trying to load the actual Movie name and it looks like it's missing a / <whack> when loading the file. I checked the setup tab and 'films' is going to the right directory. I tried it both with and without a trailing / but keep getting the following error: [2023-02-18 18:03:58,764] - [plex-utills] - [DEBUG] - Scanning The Acc [2023-02-18 18:03:58,765] - [plex-utills] - [DEBUG] - /filmsMovies/filmsThe Acc (2016)/filmsThe Acc (2016) 1080p.x264.DTS.mkv [2023-02-18 18:03:58,766] - [plex-utills] - [WARNING] - No access to files: FileNotFoundError('/filmsMovies/filmsThe Acc (2016)/filmsThe Acc (2016) 1080p.x264.DTS.mkv') [2023-02-18 18:03:58,793] - [plex-utills] - [DEBUG] - none none [2023-02-18 18:03:58,793] - [plex-utills] - [DEBUG] - Banner Decision [2023-02-18 18:03:58,794] - [plex-utills] - [DEBUG] - AUDIO decision: none [2023-02-18 18:03:58,794] - [plex-utills] - [DEBUG] - HDR: none [2023-02-18 18:03:59,175] - [plex-utills] - [DEBUG] - Not uploading poster for: The Acc I checked the github and didn't see anything glaring, any ideas? Thanks again Quote Link to comment
ApfelBirneKreis Posted May 13, 2023 Share Posted May 13, 2023 having a problem here. Seems like plexutils is only seeing my movie librarys... Problem is i have "/" in my library Name. Would this be fixable or do i have to rename my library? Quote Link to comment
casperse Posted September 30, 2023 Share Posted September 30, 2023 (edited) Seems the size of the overlay is really big in Plex? Any way to adjust this? I Thought it would be small and make the title readable 🙂 UPDATE: I found that the local poster art is unchanged, and that the poster changed is the Plex thumbnail, I think that's why the overlay is so big? Restore didnt work for me, so I had to delete the library in Plex and recreate it again, using the local poster art in the folders. Is there any way to use Plex-utills on the local stored posters in each movie folder? Edited September 30, 2023 by casperse Quote Link to comment
zacrag Posted December 20, 2023 Share Posted December 20, 2023 Anyone else BLOWING UP their docker image with this container? When I run a script, I'm getting over 30GB written. I have to shut it down before it takes everything else down with it. Can we get a share mapping to prevent this? Maybe some garbage collection? Quote Link to comment
depreciated_ Posted February 15 Share Posted February 15 On 12/19/2023 at 10:32 PM, zacrag said: Anyone else BLOWING UP their docker image with this container? When I run a script, I'm getting over 30GB written. I have to shut it down before it takes everything else down with it. Can we get a share mapping to prevent this? Maybe some garbage collection? same here. my first run was to scan 1000+ posters and my docker image starting filling up fast. It looks like the container tmp folder is the culprit. This freed up more than 12 gb. 1 Quote Link to comment
Meller Posted March 14 Share Posted March 14 On 2/15/2024 at 12:00 PM, depreciated_ said: same here. my first run was to scan 1000+ posters and my docker image starting filling up fast. It looks like the container tmp folder is the culprit. This freed up more than 12 gb. God thank you for this. I kept look at the container settings and saw no where where it should be writing to the docker img. This should be part of the template when you first install it. Thank you for posting this here. It resolved everything for me. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.