comet424 Posted December 14, 2021 Share Posted December 14, 2021 (edited) i was trying to add a 2nd drive to my one cache pool a spinner 2tb with my 2tb ssd as i had it kicking around ant it was full and using my array.. i added it to my lan cache pool and hit mount and it was taking longer time to mount wouldnt mount.. i check the logs.. and i get warning warning warning... doesnt say whats it warning about? does it say anything? and my cache pools are blank.. it comes back if i refresh 5 times or so but if i got from one page to back to main its blank does it say anything going on? and what is a CPU Tainted Error? i currently doing a reboot to see if it will mount faster and no errors hopefully update: it wont let me reboot.. not even from the terminal and i type in reboot seems the system is stuck in endless loop tower-diagnostics-20211214-0927.zip Edited December 14, 2021 by comet424 Quote Link to comment
JorgeB Posted December 14, 2021 Share Posted December 14, 2021 Btrfs crashed during the initial balance, this suggests there was some existing corruption in that filesystem, best bet is to backup and re-format the pool, some recovery options here if needed, you need to reboot, likely will need to force it, and if the pool crashes on next mount reboot again and try the recovery options before wiping it. Quote Link to comment
comet424 Posted December 14, 2021 Author Share Posted December 14, 2021 ok ya i had to hit reset button.. it mounted is running parity check.. the lancache pool is the lancache docker... i was wanting to do the spanned can i simply just use mover to move or krusader to move the lancache to the array? another question... i chose 2tb ssd so a HD wouldnt be spinning but could i use a 6TB drive with 512 or its 250 meg cache.. and keep hd spin up downs.. i choose ssd so i wouldnt have it writting to the array and to save a hard drive.. but wonder if ia HD is good enough? i use it mostly for Epic Games as if i reinstall windows i loose the games and you have to re download all the games from scratch... so i just use the cache for epic and Windows Updates and thanks ill check out the options Quote Link to comment
comet424 Posted December 14, 2021 Author Share Posted December 14, 2021 so it looks like its all mounted... and it did a Raid 0 automaticlly i didnt need to do anything figured it choose the Mirror option? its doing a parity check at the moment... but is there any errors it showing here is the diaganostic after its all mounted... i figure ill let the parity check go on and does parity check ever check cache pools? tower-diagnostics-20211214-1003.zip Quote Link to comment
JorgeB Posted December 14, 2021 Share Posted December 14, 2021 1 hour ago, comet424 said: and it did a Raid 0 automaticlly It's in single mode, since it crashed before the balance started, and it will likely crash again if you try to balance again, my recommendation is still to backup and restore. 1 hour ago, comet424 said: and does parity check ever check cache pools? No. Quote Link to comment
Squid Posted December 14, 2021 Share Posted December 14, 2021 1 hour ago, comet424 said: CPU Tainted Error It's not an error. Its simply a note the to actual devs of Linux so that they can see if you send them syslogs etc they can tell that it's not a stock linux kernel Quote Link to comment
comet424 Posted December 14, 2021 Author Share Posted December 14, 2021 (edited) ah ok learn something new everyday and do you guys recommend for a lancache pool just a spanned or mirrored? its just for epic games and windows updates.. and do you guys recomend 2 ssds for Docker/appdata/system and 2nd one for VMS or keep them all on same ssd? for performance etc Edited December 14, 2021 by comet424 Quote Link to comment
comet424 Posted December 15, 2021 Author Share Posted December 15, 2021 (edited) i used the mover to start moving the lancache to the array.... but so far it hasnt done anything since yesterday 24 hours no i guess... at 2.9 million files to move how long is it going to take? is there a way to see the current status of the mover? so then i can reformat my lancache or should i cancel the move and use krusader? and yes i said it move files from cache to array in the lancahe folder Edited December 15, 2021 by comet424 Quote Link to comment
Squid Posted December 15, 2021 Share Posted December 15, 2021 2 minutes ago, comet424 said: is there a way to see the current status of the mover? not currently Quote Link to comment
comet424 Posted December 15, 2021 Author Share Posted December 15, 2021 ah ok thatr be a good feature request unless someone has already requested it see the current status where it is.. if its Not Responding like windows does... as you have no idea whats it doing.. ill wait till tomorrow see if its done anything before i try krusader.... i apprecaite it 🙂 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.