wgstarks Posted December 17, 2021 Share Posted December 17, 2021 I tried to copy 3.71 TB of data from an XFS formatted disk to a 4 TB btrfs formatted disk but had to stop the copy because it was pretty obvious that it was going to over fill the disk. I used this command- rsync -av --progress /mnt/disks/deluge/ /mnt/torrent/ Both disks are 4 TB. Does data take more space on btrfs? Quote Link to comment
JorgeB Posted December 17, 2021 Share Posted December 17, 2021 14 minutes ago, wgstarks said: Does data take more space on btrfs? No, but if there are sparse files on source you need to use the --sparse flag or it will take much more space. Quote Link to comment
wgstarks Posted December 17, 2021 Author Share Posted December 17, 2021 I dont think there are any sparse files. I’m not seeing any at least. The source is just a download location for qbittorrent so torrent files and the associated downloaded files. Do torrent downloaders create sparse files? Quote Link to comment
JorgeB Posted December 17, 2021 Share Posted December 17, 2021 32 minutes ago, wgstarks said: Do torrent downloaders create sparse files? Usually yes, unless pre-allocate all files is enable. Quote Link to comment
wgstarks Posted December 17, 2021 Author Share Posted December 17, 2021 Thanks. I’ll give that a shot then. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 Is it normal for the root level directories on the btrfs pool to show up as shares? I'm not sure what to configure for "use cache" setting? Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 Also, I can't set smb security to anything other than public. Can't change any of the share settings at all. That can't be right. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 16 minutes ago, wgstarks said: Is it normal for the root level directories on the btrfs pool to show up as shares? I'm not sure what to configure for "use cache" setting? All top level folders on array or pools are automatically a user share and always have been. Any user share you haven't configured has default settings. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 3 minutes ago, wgstarks said: Also, I can't set smb security to anything other than public. Can't change any of the share settings at all. That can't be right. Diagnostics? Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 1 minute ago, trurl said: All top level folders on array or pools are automatically a user share and always have been. Any user share you haven't configured has default settings. So should use cache be set to NO for cache pools? Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 2 minutes ago, trurl said: Diagnostics? Attached brunnhilde-diagnostics-20211217-2103.zip Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 1 minute ago, wgstarks said: So should use cache be set to NO for cache pools? There is no such setting for pools, only for user shares. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 Just now, trurl said: There is no such setting for pools, only for user shares. Since there seems to be some confusion on pools vs. user shares, I have to wonder which you were referring to here: 9 minutes ago, wgstarks said: Also, I can't set smb security to anything other than public. Can't change any of the share settings at all. That can't be right. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 Just now, trurl said: There is no such setting for pools, only for user shares. Your right. I worded that question badly. Maybe I'm just letting the name "Cache Pool" throw me off. Not sure what happens when mover runs if a share on the cache pool uses cache/ Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 You have 60 .cfg files in the shares folder of those diagnostics. No way for me to know which are actually shares, and which are .cfg files for shares that no longer exist, without opening each. A screenshot of User Shares might be useful. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 2 minutes ago, trurl said: Since there seems to be some confusion on pools vs. user shares, I have to wonder which you were referring to here: I tried to set security on the top level folder on the pool to private but can't change if to anything other than public. Same for the pool itself in the disk shares. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 2 minutes ago, wgstarks said: Not sure what happens when mover runs if a share on the cache pool uses cache Mover only moves files to/from the pool the user share is set to use. The yes,no,only,prefer setting is the same as always. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 1 minute ago, trurl said: You have 60 .cfg files in the shares folder of those diagnostics. No way for me to know which are actually shares, and which are .cfg files for shares that no longer exist, without opening each. A screenshot of User Shares might be useful. "torrent" near the bottom is the only top level folder on the pool. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 3 minutes ago, wgstarks said: tried to set security on the top level folder on the pool There is no security setting for folders, there is only security settings for shares (and for disks). Perhaps you meant you tried to set security for the user share. 2 minutes ago, wgstarks said: Same for the pool itself in the disk shares. I always recommend not sharing disks. There is more than one way you can make mistakes with that. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 Share settings- Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 1 minute ago, trurl said: Perhaps you meant you tried to set security for the user share. Yes. Tried for the share and for the disk pool. Quote Link to comment
wgstarks Posted December 18, 2021 Author Share Posted December 18, 2021 2 minutes ago, trurl said: always recommend not sharing disks. There is more than one way you can make mistakes with that. I can't change it to export=no. When i click apply it is still set to yes. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 torrent share is set to not use any pools. In fact, none of your shares are set to use any pool except the pool named "cache". I assume the pool named "cache" is not the one we are interested in currently. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 I think you may have a problem because you have named the pool the same as a user share. Quote Link to comment
trurl Posted December 18, 2021 Share Posted December 18, 2021 Just now, trurl said: I think you may have a problem because you have named the pool the same as a user share. That might be causing Unraid a problem, but it would also cause SMB problems if you export that pool, one of the ways I mentioned 8 minutes ago, trurl said: I always recommend not sharing disks. There is more than one way you can make mistakes with that. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.