Gelbert Posted February 22, 2022 Share Posted February 22, 2022 (edited) Hi guys I've restarted my server this morning and my array refused to start. I then checked in the GUI and for some odd reason, my UNraid server is now refusing to see my drives, and wants to enable this logical volume. The card I use is a HP P212 with IT mode (HBA) mode enabled. Cable is a SFF-8087 to 4 port SATA Can anyone please advise how I go about fixing this? Edited February 24, 2022 by Gelbert Solved Quote Link to comment
Gelbert Posted February 23, 2022 Author Share Posted February 23, 2022 Also, can I just redo the drive config? Quote Link to comment
trurl Posted February 23, 2022 Share Posted February 23, 2022 attach diagnostics to your NEXT post in this thread Quote Link to comment
Gelbert Posted February 23, 2022 Author Share Posted February 23, 2022 Here you go medianas-diagnostics-20220224-1229.zip Quote Link to comment
Gelbert Posted February 23, 2022 Author Share Posted February 23, 2022 Can I not just somehow rebuild these two drives? Quote Link to comment
Gelbert Posted February 23, 2022 Author Share Posted February 23, 2022 Also, if I mount them using the unassigned plugin, I can see all my files. Quote Link to comment
JorgeB Posted February 24, 2022 Share Posted February 24, 2022 Disks changed name because they were moved from the RAID controller, also because of that they fail to mount in the array due to not conforming to the partition layout Unraid requires, that's two of the reasons we don't recommend RAID controllers, you have two options, assuming parity is still valid you can rebuild one disk at at time so that the correct partition layout can be recreated, like this: https://forums.unraid.net/topic/84717-moving-drives-from-non-hba-raid-card-to-hba/ Other option is to mount the disks with UD since it won't care about the incorrect partition layout and copy the data to new disks in the array. Quote Link to comment
Gelbert Posted February 24, 2022 Author Share Posted February 24, 2022 Thanks for that info, not sure why the decided to loose its HBA config. It was always working with the SFF-8087 to 4-Port SATA cable. I do have a spare drive so I will add that and see if I can rebuild it drive by drive, if not I will need to use UD to copy the files over. Quote Link to comment
trurl Posted February 24, 2022 Share Posted February 24, 2022 1 hour ago, Gelbert said: I do have a spare drive so I will add that and see if I can rebuild it drive by drive What does ADDing a drive have to do with the recommended recovery method? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.