Kuzok Posted May 21, 2022 Share Posted May 21, 2022 Apologies if this has been brought up a thousand times already but I am now stuck. I have a Athlon 3000G with a Aorus B450 Elite and keep getting CPU is unsupported. SVM Enabled, Global C States disabled. What am I missing here. Any assistance would be greatly appreciated. Quote Link to comment
JorgeB Posted May 21, 2022 Share Posted May 21, 2022 Where do you see that? You might need a BIOS update. Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 It runs through the Unraid boot sequence and then just stops at "CPU is Unsupported" so BIOS is fine Did all the Unraid pre reqs etc. It's a brand new CPU so confused. Quote Link to comment
JorgeB Posted May 21, 2022 Share Posted May 21, 2022 And the CPU is identified correctly in the board BIOS? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 Just now, JorgeB said: And the CPU is identified correctly in the board BIOS? It is yes, everything looks good. There must be a setting I'm missing somewhere. Quote Link to comment
JorgeB Posted May 21, 2022 Share Posted May 21, 2022 Strange, if you're booting v6.9.2 try v6.10.0 or vice-versa. Quote Link to comment
JorgeB Posted May 21, 2022 Share Posted May 21, 2022 A photo of the screen when it stops might also give some clues. Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 10 minutes ago, JorgeB said: A photo of the screen when it stops might also give some clues. Here you go Quote Link to comment
trurl Posted May 21, 2022 Share Posted May 21, 2022 Can you boot any other OS on this hardware? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 (edited) I have booted Win 10 and Win server 2016 setup drive and formatted the drives Edit: Win 10 was full OS on one of the drives so just to desktop and everything was detected perfectly Edited May 21, 2022 by Kuzok Clarity Quote Link to comment
SimonF Posted May 21, 2022 Share Posted May 21, 2022 (edited) 11 minutes ago, Kuzok said: Here you go I think the CPU is unsupported is for the mcelog daemon, does the boot process not continue past that point? Edited May 21, 2022 by SimonF 1 Quote Link to comment
trurl Posted May 21, 2022 Share Posted May 21, 2022 How long have you waited after that message appears to see if it finishes booting? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 3 minutes ago, trurl said: How long have you waited after that message appears to see if it finishes booting? I left it a while and it went to just a blinking curser for quite a while then it said waiting for safe shutdown or something to that effect. So effectively, that's where it ends. Quote Link to comment
trurl Posted May 21, 2022 Share Posted May 21, 2022 Have you never successfully booted Unraid on this hardware? Did you try this? 42 minutes ago, JorgeB said: Strange, if you're booting v6.9.2 try v6.10.0 or vice-versa. Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 (edited) 6 minutes ago, trurl said: Have you never successfully booted Unraid on this hardware? Did you try this? I was just making 6.9.2 bootable. Will report back in a sec. Edited May 21, 2022 by Kuzok Typo Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 47 minutes ago, Kuzok said: I was just making 6.9.2 bootable. Will report back in a sec. So far no go, 2 USB drives later and I can't even get 6.9.2 to boot Quote Link to comment
trurl Posted May 21, 2022 Share Posted May 21, 2022 1 hour ago, trurl said: Have you never successfully booted Unraid on this hardware? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 1 minute ago, trurl said: Nope, literally everything else boots, Windows, Ubuntu, POP OS, TrueNAS. Not a single issue across the board but I REALLY would like to run Unraid again. I already have a standard licenced I used about 2 years ago but I was testing other things so want to get back to it, Previously I had Unraid on a Dell R510. Worked great Quote Link to comment
SimonF Posted May 21, 2022 Share Posted May 21, 2022 31 minutes ago, Kuzok said: Nope, literally everything else boots, Windows, Ubuntu, POP OS, TrueNAS. Not a single issue across the board but I REALLY would like to run Unraid again. I already have a standard licenced I used about 2 years ago but I was testing other things so want to get back to it, Previously I had Unraid on a Dell R510. Worked great Which mode are you trying to boot into? Standard or GUI, have you tried safe mode? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 4 minutes ago, SimonF said: Which mode are you trying to boot into? Standard or GUI, have you tried safe mode? Good point, tried gui the whole time. will try standard and safe now Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 1 hour ago, Kuzok said: Good point, tried gui the whole time. will try standard and safe now Still a no, neither options worked, reflashed the Bios and still no go Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 Ok, I Just fully installed TrueNAS and working 100%. I'm out of ideas and my wife what's the thing of the dining room table Quote Link to comment
SimonF Posted May 21, 2022 Share Posted May 21, 2022 36 minutes ago, Kuzok said: Still a no, neither options worked, reflashed the Bios and still no go Have you tried different OS versions of Unraid? Quote Link to comment
Kuzok Posted May 21, 2022 Author Share Posted May 21, 2022 8 minutes ago, SimonF said: Have you tried different OS versions of Unraid? I have, same problem different version Quote Link to comment
SimonF Posted May 22, 2022 Share Posted May 22, 2022 15 hours ago, Kuzok said: I have, same problem different version When you have flashing cursor. Does Pressing CTRL+ALT+F1 this should bring you back to the command line? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.