Kashmir Posted May 23, 2022 Share Posted May 23, 2022 (edited) Hi all, I recently installed an additonal 2 PORT PCIe NIC card into my unraid server. It detected it fine, however it automatically puts all ports in Bonding ( see attached Unraid1 ). I cannot however change this config, If i remove bonding the server becomes unreachable. I have to restore network config from backup to get back in. I don't wan't bonding, i want NIC 1 dedicated to the box ( bridging ). I want to use other NICs for my other VM appliances. So far everything I tried has failed.. Can somebody help me in this. Thanks, Edited May 23, 2022 by Kashmir Quote Link to comment
JorgeB Posted May 24, 2022 Share Posted May 24, 2022 8 hours ago, Kashmir said: i want NIC 1 dedicated to the box ( By NIC1 do you mean eth1? Quote Link to comment
itimpi Posted May 24, 2022 Share Posted May 24, 2022 Have you tried simply removing all entries except eth0 from the bonding list? Unraid runs the webGUI on eth0. Quote Link to comment
tjb_altf4 Posted May 24, 2022 Share Posted May 24, 2022 If you don't want any bonding, (3rd option down) Enable Bonding = No Array, VM + Docker services will need to be disabled if I remember right. If you want to pass it through to a VM, you will need to go over to Tools > System Devices and bind to VFIO (find your VM dedicated NIC and check the ticks next to it, press bind selected button) Quote Link to comment
Kashmir Posted May 29, 2022 Author Share Posted May 29, 2022 On 5/24/2022 at 6:25 PM, itimpi said: Have you tried simply removing all entries except eth0 from the bonding list? Unraid runs the webGUI on eth0. Yes, I tried that and it seemed logical, but that breaks it. Quote Link to comment
Kashmir Posted May 29, 2022 Author Share Posted May 29, 2022 On 5/24/2022 at 4:58 PM, JorgeB said: By NIC1 do you mean eth1? I mean Eth0 Quote Link to comment
Kashmir Posted May 29, 2022 Author Share Posted May 29, 2022 On 5/24/2022 at 6:26 PM, tjb_altf4 said: If you don't want any bonding, (3rd option down) Enable Bonding = No Array, VM + Docker services will need to be disabled if I remember right. If you want to pass it through to a VM, you will need to go over to Tools > System Devices and bind to VFIO (find your VM dedicated NIC and check the ticks next to it, press bind selected button) I disabled Bonding - changed option to No. After that I loose connection. Quote Link to comment
Kashmir Posted June 2, 2022 Author Share Posted June 2, 2022 This solved itself after the upgrade.. I can see it now and no longer listed in the network part Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.