bpalhares Posted May 25, 2022 Share Posted May 25, 2022 Hi Since 2 days ago my server keeps stopping the array randomly, last time it was running only 15/20mn and when I tryed to reach a share, it was stopped... No hardware change, no pluggins added, nothing... Please help... alexandria-diagnostics-20220525-1550.zip Quote Link to comment
JorgeB Posted May 25, 2022 Share Posted May 25, 2022 Enable the syslog server and post that after a crash, though if it's a hardware issue, and by the description it might be, possibly nothing will logged. Quote Link to comment
bpalhares Posted May 25, 2022 Author Share Posted May 25, 2022 Ok, gonna do that Quote Link to comment
bpalhares Posted May 25, 2022 Author Share Posted May 25, 2022 Just shutdown again, this time I have more logs from JorgeB sugestion. Yes, I have UPS, just disconected the USB and stopped the APC UPS daemon, just in case. syslog-192.168.1.99.log Quote Link to comment
JorgeB Posted May 25, 2022 Share Posted May 25, 2022 9 minutes ago, bpalhares said: Just shutdown again Do you mean the server turned off? If yes that's almost certainly hardware related, or something invoking the shutdown command, and unfortunately the log shows nothing of note. Quote Link to comment
bpalhares Posted May 25, 2022 Author Share Posted May 25, 2022 18 minutes ago, JorgeB said: Do you mean the server turned off? If yes that's almost certainly hardware related, or something invoking the shutdown command, and unfortunately the log shows nothing of note. This time yes, the server turned off, made a clean system power down. The other times, only stopped the array. Quote Link to comment
itimpi Posted May 25, 2022 Share Posted May 25, 2022 30 minutes ago, bpalhares said: The other times, only stopped the array. Do you mean the server webGUI was still working and that showed the array stopped? If so this is strange because I do not know of anything in Unraid that can cause this to happen Quote Link to comment
bpalhares Posted May 25, 2022 Author Share Posted May 25, 2022 50 minutes ago, itimpi said: Do you mean the server webGUI was still working and that showed the array stopped? If so this is strange because I do not know of anything in Unraid that can cause this to happen yes, server webGUI working but array stopped, until this last time. I mean, server could have rebooted, but the array made a clean stop, no parity checking needed. I supposed that if the server just rebooted, the array would do a “dirt” stop and had to be parity checked… Quote Link to comment
trurl Posted May 26, 2022 Share Posted May 26, 2022 According to your diagnostics, array is not set to autostart. So, if it reboots the array would be stopped. Is your BIOS configured to automatically boot when power is restored? Quote Link to comment
bpalhares Posted May 26, 2022 Author Share Posted May 26, 2022 (edited) 16 hours ago, trurl said: According to your diagnostics, array is not set to autostart. So, if it reboots the array would be stopped. Is your BIOS configured to automatically boot when power is restored? Bios is not configured to automatically boot, so it did a restart. I always assumed that if a hardware error occorred that shutdown the system, the parity would have to be checked upon starting the array. Replaced all the RAM, same problem. Only thing I noticed, I didn't start the array and it didn't reboot for more than 7 hours. When I started it, always reboot in less than 2 hours. Edited May 26, 2022 by bpalhares Quote Link to comment
trurl Posted May 26, 2022 Share Posted May 26, 2022 Unraid does not reboot on its own. Quote Link to comment
trurl Posted May 26, 2022 Share Posted May 26, 2022 Does anyone else have access? Have you exposed your server on the internet? Quote Link to comment
bpalhares Posted May 26, 2022 Author Share Posted May 26, 2022 2 hours ago, trurl said: Does anyone else have access? Have you exposed your server on the internet? No one else has access. I have some dockers that use internet, namely qbittorrent/teamspeak/YouTube-DL Quote Link to comment
bpalhares Posted May 27, 2022 Author Share Posted May 27, 2022 Funny thing, I removed the preclear disk pluggin, that apparently was not compatible with Unraid 6.9.2, and it has been 16 hours and everything is working perfectly.... Fingers crossed! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.