Dtrain Posted July 3, 2022 Share Posted July 3, 2022 (edited) Moin ! habe mir folgendes Gehäuse gekauft und mit 4x 18TB HDD bestück, es soll ein reines Backup system werden. Leider schaffe ich es nicht es einzubinden, die Platten bleiben in Unraid unsichtbar ... ( in Windows werden Sie sofort erkannt) Angeschlossen wird es über Thunderbolt , gelistet wird es als Marvell Controller IOMMU group 25:[1b4b:9548] 0b:00.0 RAID bus controller: Marvell Technology Group Ltd. Device 9548 (rev b3) Habe mich in das Thema eingelesen und verschiedene Möglichkeiten die hier im Forum gelistet sind ausprobiert, leider ohne Erfolg. Der Thunderbolt Strang ist zu 100% in Ordnung ich kann, da das Gehäuse 2 Anschlüsse hat, kann ich Problemlos andere Thunderbolt HDDs anschließen diese werden sofot in Unraid erkannt und sich auch nutzbar. Jemand eine Idee ? (Diagnose Zip im Anhang ) lspci -vvnn -s 0b:00.0 gibt folgendes aus lspci -vvnn -s 0b:00.0 0b:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9548] (rev b3) Subsystem: Marvell Technology Group Ltd. Device [1b4b:9548] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 IOMMU group: 25 Region 0: Memory at 80340000 (64-bit, non-prefetchable) [disabled] [size=128K] Region 2: Memory at 80300000 (64-bit, non-prefetchable) [disabled] [size=256K] Expansion ROM at 80360000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch+ ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x4 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- tower-diagnostics-20220703-0955.zip Edited July 3, 2022 by Dtrain Quote Link to comment
mgutt Posted July 3, 2022 Share Posted July 3, 2022 unRAID hat keinen offiziellen Support für TB. Siehe auch: https://forums.unraid.net/topic/85568-thunderbolt-3/?do=findComment&comment=1133745 Da hilft nur ausprobieren oder an eine VM durchschleifen oder aufgeben. @ich777 meinst du es es ginge einfacher in einem Debian Container? Quote Link to comment
Dtrain Posted July 3, 2022 Author Share Posted July 3, 2022 funktoniert aber Problemlos, nur halt nicht mit desem Controller ... Deshalb ist auch nicht Thunderbolt related ,,, Quote Link to comment
mgutt Posted July 3, 2022 Share Posted July 3, 2022 Dann gibt es vermutlich keinen Treiber für den Marvel Controller. Welcher ist das? Quote Link to comment
ich777 Posted July 3, 2022 Share Posted July 3, 2022 9 hours ago, mgutt said: @ich777 meinst du es es ginge einfacher in einem Debian Container? Eher nicht, vermutlich nur mit einer VM wenn der controller durchgereicht wird. Das Problem ist immer das die Kernel Space Treiber auf Unraid verfügbar sind und die User Space Tools nicht bzw. braucht man die oft gar nicht. @Dtrain hast du im BIOS eine Einstellung alle Geräte einfach so zu erlauben ohne sicheren Handshake, wenn ja, das solltest du anschalten. Linux und Thunderbolt sind oftmals nicht beste Freunde... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.