leawhig Posted September 12, 2022 Share Posted September 12, 2022 (edited) Recently upgraded, but I don't know if the network is good or bad "WAN good or bad ,LAN OK" pinging the internet fails: Destination Host Unreachable (first and second jpg) Please help me because I can't directly generate diagnostics either (keeps stuck on this screen:third jpg) /boot/log is still the generation of diagnostics Edited September 13, 2022 by wdnaser Quote Link to comment
JorgeB Posted September 12, 2022 Share Posted September 12, 2022 Delete/rename /boot/config/network.cfg so it will go back to defaults and then check if the server and get an IP address from the DHCP server. Quote Link to comment
leawhig Posted September 12, 2022 Author Share Posted September 12, 2022 6 hours ago, JorgeB said: Delete/rename /boot/config/network.cfg so it will go back to defaults and then check if the server and get an IP address from the DHCP server. it's not working Whenever I delete network.cfg and reboot, as soon as I change the IP I'll get the above situation. Quote Link to comment
JorgeB Posted September 12, 2022 Share Posted September 12, 2022 Don't change the IP, see if the server gets one from the DHCP server, if it doesn't there's a problem there, or with how the serve is connecting to it. Quote Link to comment
leawhig Posted September 12, 2022 Author Share Posted September 12, 2022 14 minutes ago, JorgeB said: Don't change the IP, see if the server gets one from the DHCP server, if it doesn't there's a problem there, or with how the serve is connecting to it. I am waiting for DHCP to get IP success, and then change the static IP But after the change will not be able to get the IP, the NIC light from a bright to not light Quote Link to comment
JorgeB Posted September 12, 2022 Share Posted September 12, 2022 And with DHCP it works? Quote Link to comment
BillR Posted September 12, 2022 Share Posted September 12, 2022 Do you have more than one NIC? Can you check that the MAC address showing for the NIC assigned to Interface eth0 actually matches the MAC address of the physical adaptor? Under interface rules, you can choose the NIC order. Quote Link to comment
leawhig Posted September 12, 2022 Author Share Posted September 12, 2022 (edited) 6 minutes ago, JorgeB said: And with DHCP it works? Yes , other server can get IP. By the way , i have Passthrough two nic I don't know if this will have an effect? Edited September 12, 2022 by wdnaser mistake Quote Link to comment
BillR Posted September 12, 2022 Share Posted September 12, 2022 8 minutes ago, wdnaser said: Yes , other server can get IP. By the way , i have Passthrough two nic I don't know if this will have an effect? If I'm reading this right, you have two NICs on the new server? In that case, the likely problem is the order of the NICs is opposite to what you think. Boot into GUI mode and swap them here: Quote Link to comment
leawhig Posted September 12, 2022 Author Share Posted September 12, 2022 14 minutes ago, BillR said: If I'm reading this right, you have two NICs on the new server? In that case, the likely problem is the order of the NICs is opposite to what you think. Boot into GUI mode and swap them here: My UNRAID has only one NIC All other NICs are Passthrough to vm. Quote Link to comment
JorgeB Posted September 12, 2022 Share Posted September 12, 2022 Is the IP attributed by the DHCP server in the same subnet? Or just use that one. Quote Link to comment
trurl Posted September 12, 2022 Share Posted September 12, 2022 Use DHCP, no need to set Static IP, reserve IP by MAC address on the router. Quote Link to comment
Solution leawhig Posted September 13, 2022 Author Solution Share Posted September 13, 2022 ohh... That solves it! I connected the keyboard to manually reboot the machine. Quote Link to comment
leawhig Posted September 13, 2022 Author Share Posted September 13, 2022 There seems to be something wrong with the webUI edit Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.