hawihoney Posted November 9, 2022 Share Posted November 9, 2022 Mit dem Unraid Upgrade von 6.11.1 auf 6.11.3 bin ich beim Start der Unraid VMs (Unraid Host und Unraid Client) in einer Art BIOS gelandet. Früher startete jede Unraid VM sofort. Der Unraid Client startet von einem USB Stick aber davor hängt natürlich eine VDisk. In den Announcements hatte ich schon gelesen, dass man nun eine Boot Order angeben muss. Aber was genau ist denn nun erforderlich? Die Boot Order bei der VDisk oder die Checkbox bei "Enable USB boot"? Was ist korrekt? Vielen Dank. Quote Link to comment
mgutt Posted November 10, 2022 Share Posted November 10, 2022 Ich denke mal USB Boot heißt, dass er von USB booten darf und wenn da nichts ist, dann bootet er von den restlichen Datenträgern entsprechend der hinterlegten Reihenfolge. On 11/9/2022 at 3:38 PM, hawihoney said: davor hängt natürlich eine VDisk. Was enthält die denn?! Quote Link to comment
hawihoney Posted November 10, 2022 Author Share Posted November 10, 2022 23 minutes ago, mgutt said: Was enthält die denn? Gute Frage: Ich habe das gemäß Anleitung gemacht. Du wählst beim Anlegen einer Unraid VM eine Linux Distribution aus. Ich dachte immer, dass das darin rudimentär enthalten ist. Quote Link to comment
mgutt Posted November 10, 2022 Share Posted November 10, 2022 Dann ist das vermutlich nur ein leerer Datenträger. Weil Unraid braucht ja nichts außer den Stick und klar die Array Datenträger, aber da hast du ja den HBA durchgeschliffen. Quote Link to comment
hawihoney Posted November 10, 2022 Author Share Posted November 10, 2022 2 minutes ago, mgutt said: Dann ist das vermutlich nur ein leerer Datenträger. Weil Unraid braucht ja nichts außer den Stick und klar die Array Datenträger, aber da hast du ja den HBA durchgeschliffen. Ich habe den alten Link gefunden. Nach dieser Anleitung bin ich vorgegangen: https://www.linuxserver.io/blog/2015-12-14-creating-an-unraid-virtual-machine-to-run-on-an-unraid-host Unter "Step 5" wird eine VDisk angelegt - warum auch immer. Quote Link to comment
mgutt Posted November 10, 2022 Share Posted November 10, 2022 Macht keinen Sinn. Ich mein du kannst ja auch jeden PC ohne Festplatte und mit dem Unraid Stick booten. Kann man dann zwar kein Array erstellen, aber booten tut er ja trotzdem. 1 Quote Link to comment
SimonF Posted November 10, 2022 Share Posted November 10, 2022 USB Boot Yes is really only needed if you have multi same vendor/prod and use USB_Manager to connect them. Quote Link to comment
hawihoney Posted November 11, 2022 Author Share Posted November 11, 2022 (edited) 7 hours ago, SimonF said: USB Boot Yes is really only needed if you have multi same vendor/prod and use USB_Manager to connect them. I address passed through USB devices by "bus:device" and not by "vendor:product". That way I'm completely independent of same devices, IDs, whatever. No USB-Manager here. This did work for years. Now with 6.11.3 I'm greeted and stuck in some kind of BIOS whenever I start a Unraid VM. This BIOS appears after hitting 10-20 times on ESC, etc. Within the unknown BIOS I need to hit "Continue". After that the Unraid VM starts. <hostdev mode='subsystem' type='usb' managed='no'> <source> <address bus='1' device='2'/> </source> <alias name='hostdev0'/> <address type='usb' bus='0' port='1'/> </hostdev> Edited November 11, 2022 by hawihoney Quote Link to comment
SimonF Posted November 11, 2022 Share Posted November 11, 2022 (edited) 55 minutes ago, hawihoney said: I address passed through USB devices by "bus:device" and not by "vendor:product". That way I'm completely independent of same devices, IDs, whatever. No USB-Manager here. This did work for years. Now with 6.11.3 I'm greeted and stuck in some kind of BIOS whenever I start a Unraid VM. This BIOS appears after hitting 10-20 times on ESC, etc. Within the unknown BIOS I need to hit "Continue". After that the Unraid VM starts. <hostdev mode='subsystem' type='usb' managed='no'> <source> <address bus='1' device='2'/> </source> <alias name='hostdev0'/> <address type='usb' bus='0' port='1'/> </hostdev> Just add boot order to your XML, You may have to remove off the disk <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x0930'/> <product id='0x6545'/> <address bus='1' device='21'/> </source> <boot order='1'/> <alias name='hostdev0'/> <address type='usb' bus='0' port='1'/> </hostdev> Edited November 11, 2022 by SimonF 1 1 Quote Link to comment
hawihoney Posted November 14, 2022 Author Share Posted November 14, 2022 On 11/11/2022 at 7:52 AM, SimonF said: <boot order='1'/> Thanks. After a first crash of my Unraid Server in 10-12 years, I tried to change the VM Start. Added boot_order=1 to the USB stick and changed the IMG to boot_order=2. Startup is way faster now. Next time I will remove the IMG completely. Thanks for the tip. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.