N47H4N Posted February 8, 2023 Author Share Posted February 8, 2023 Thx for your answer @itimpi, how can I check if I have other issues with my flash drive ? to my knowledge, this reboot issue is the only problem that I have. (and also the problem that I can't do parity check with my docker and VMs turned on) Quote Link to comment
itimpi Posted February 8, 2023 Share Posted February 8, 2023 4 minutes ago, N47H4N said: and also the problem that I can't do parity check with my docker and VMs turned on There is no reason that a parity check should stop those working, although their performance might suffer if they try to access files on the main array. Quote Link to comment
N47H4N Posted February 8, 2023 Author Share Posted February 8, 2023 and how can I improve the performance ? should I move my parity disks to another SATA controller ? in another PCI-E slot ? what about those unclean shutdown ? Quote Link to comment
itimpi Posted February 8, 2023 Share Posted February 8, 2023 42 minutes ago, N47H4N said: and how can I improve the performance ? should I move my parity disks to another SATA controller ? in another PCI-E slot ? The speeds seemed quite reasonable when there was nothing writing to the array drives so not sure that there is an easy fix for this. I have no idea though why your VMs and/or Docker containers cannot run while a parity check is running as the critical shares for performance (appdata, system) do not seem to have files on the array. 43 minutes ago, N47H4N said: what about those unclean shutdown ? At the moment I have no further ideas on this I am afraid. Maybe someone else might chime in with an idea. Do you have the syslog server enabled so that you have a syslog that covers the whole shutdown and reboot process? It does seem to be the most important issue though as if you could stop this happening so you would only get parity checks when you wanted/scheduled them they would be less painful. Quote Link to comment
trurl Posted February 8, 2023 Share Posted February 8, 2023 5 hours ago, N47H4N said: what about those unclean shutdown ? There is a whole sticky thread about that pinned near the top of this General Support subforum Quote Link to comment
N47H4N Posted February 10, 2023 Author Share Posted February 10, 2023 I've setup a syslog server It could explain why I always have a parity check when I reboot ? Quote Link to comment
JorgeB Posted February 10, 2023 Share Posted February 10, 2023 25 minutes ago, N47H4N said: It could explain why I always have a parity check when I reboot ? Yes. Quote Link to comment
N47H4N Posted April 5, 2023 Author Share Posted April 5, 2023 Hello all, It's me again.. like every month when I've to do the automatic parity check Once again it isn't working... I'm stuck at 95.4 % since almost 2 days... Any idea why ? thx nas01-diagnostics-20230405-1954.zip Quote Link to comment
JorgeB Posted April 5, 2023 Share Posted April 5, 2023 Apr 3 23:32:04 NAS01 kernel: md: sync done. time=257523sec Apr 3 23:32:04 NAS01 kernel: md: recovery thread: exit status: 0 It finished a couple of days ago, which browser are you using? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.