jmbailey2000 Posted July 12, 2023 Share Posted July 12, 2023 (edited) NEW EDIT: Well, after waiting 30 hours for a parity rebuild, got everything checked out and reset they I wanted and decided it was time to downgrade. Like I always I have stopped all my dockers and disabled the docker so it wouldn't start up after the downgrade until I was ready. Whoops, forgot to check something and BAM!!!! Can't start the docker service and here we are again, back to 6.12.2 not working. Yeah, yeah, I know, reboot and that should fix it but guess what, it doesn't. I'll have to rebuild parity again. So here is my NEW question..........should I just do the down grade without docker service able to be started (assuming that after downgrade the reboot will fix it)? And if the shutdown doesn't cleanly go down, which it hasn't since I installed 6.12.2 over a week ago (and 5 parity rebuilds) is there any concern that the downgrade was done and it is coming back up to complete the downgrade with an unclean shutdown? PAST EDIT: Never mind. Found stuff that said a reboot is the only way. Well, once again, wouldn't shut down after sitting for an hour and couldn't kill any process to make it complete, so force a reboot and now will sit around and wait 30 hours for a parity check to finish. Then 6.12.2 is gone. I came from 6.9.2 but am going to try and down grade to 6.11.5. ORIGINAL: Well, 6.12.2 has been a total disaster. I can't reboot the server without it failing shutdown, even trying to stop any open processes, etc. So every reboot causes a parity check. Once I let it finish the check, I found the docker.img file corrupt. Got that fixed, and now I find the /mnt/user folder is "missing" or labeled as ?user in MC. When I look at ls-l for the user folder is shows as "d???????" and all other fields for the listing as "?". I can't install any new dockers now even though I was able to install all previous dockers to rebuild the docker.img file. I want to downgrade but this missing /mnt/user file has me concerned because now docker what start because of missing path. What can I do to get it back, just recreate the folder under /mnt or is there something else that needs to be done to fix it. Edited Monday at 09:13 PM by jmbailey2000 Edited July 12, 2023 by jmbailey2000 Quote Link to comment
Solution JorgeB Posted July 12, 2023 Solution Share Posted July 12, 2023 21 minutes ago, jmbailey2000 said: I can't reboot the server without it failing shutdown You can update to v6.12.3-rc2 to test, that issue should be fixed, need to switch to the next branch to see the update. Quote Link to comment
jmbailey2000 Posted July 12, 2023 Author Share Posted July 12, 2023 11 minutes ago, JorgeB said: You can update to v6.12.3-rc2 to test, that issue should be fixed, need to switch to the next branch to see the update. So any concerns with updating to rc2 with an unclean shutdown in the mix? Quote Link to comment
JorgeB Posted July 12, 2023 Share Posted July 12, 2023 Should not be an issue, same as booting with current release. Quote Link to comment
jmbailey2000 Posted July 12, 2023 Author Share Posted July 12, 2023 12 minutes ago, JorgeB said: Should not be an issue, same as booting with current release. Any way to get around the unclean shutdown or do I just have to deal with another parity check? Quote Link to comment
JorgeB Posted July 12, 2023 Share Posted July 12, 2023 You can cancel the parity check, then run one at a more opportune time. Quote Link to comment
ljm42 Posted July 12, 2023 Share Posted July 12, 2023 See this to prevent another unclean shutdown: https://forums.unraid.net/topic/141479-6122-array-stop-stuck-on-retry-unmounting-disk-shares/#comment-1281063 2 Quote Link to comment
jmbailey2000 Posted July 12, 2023 Author Share Posted July 12, 2023 5 minutes ago, ljm42 said: See this to prevent another unclean shutdown: https://forums.unraid.net/topic/141479-6122-array-stop-stuck-on-retry-unmounting-disk-shares/#comment-1281063 Holy crap!!! Where was this during my last 2 messes!!! Awesome!!! I'll give this a try and then see if I can upgrade to rc2 (crossing fingers it has been fixed). Quote Link to comment
jmbailey2000 Posted July 12, 2023 Author Share Posted July 12, 2023 28 minutes ago, jmbailey2000 said: Holy crap!!! Where was this during my last 2 messes!!! Awesome!!! I'll give this a try and then see if I can upgrade to rc2 (crossing fingers it has been fixed). Bing, bang boom......BINGO!!!!! I might be able to take a few full breaths now and get everything back to normal. Which has been al over me about the media server being down!!! I followed the docker.img steps (after making sure the docker settings was set to disabled) to avoid an unclean shutdown. Then did a reboot after upgrading to rc2. Rebooted clean. Started array clean. Started docker clean. Looking good so far. THANKS EVERYONE!!! 2 Quote Link to comment
ljm42 Posted July 12, 2023 Share Posted July 12, 2023 Unraid 6.12.3-rc3 is now available which should prevent issues stopping the array: https://forums.unraid.net/bug-reports/prereleases/unraid-os-version-6123-rc3-available-r2572/ Quote Link to comment
jmbailey2000 Posted July 13, 2023 Author Share Posted July 13, 2023 3 hours ago, ljm42 said: Unraid 6.12.3-rc3 is now available which should prevent issues stopping the array: https://forums.unraid.net/bug-reports/prereleases/unraid-os-version-6123-rc3-available-r2572/ Yep all good, but now I have really weird issue trying to install docker apps from CA. The selection of an app usually hangs without actually starting to load. If it does load, the actual install process shows the downloading, extracting, etc. but never seems to finish. I finally refresh the page and I get a 400 Bad Request error. I have to clear my cache in Chrome to regain access to Unraid's interface. Otherwise, everything else seems to work. Quote Link to comment
ljm42 Posted July 13, 2023 Share Posted July 13, 2023 I don't think I've seen anyone else report that, pls upload your diagnostics.zip (from Tools -> Diagnostics) after the problem happens Quote Link to comment
jmbailey2000 Posted July 13, 2023 Author Share Posted July 13, 2023 6 hours ago, ljm42 said: I don't think I've seen anyone else report that, pls upload your diagnostics.zip (from Tools -> Diagnostics) after the problem happens The web gui for everything will be down. IS there a command line way to get that info? Quote Link to comment
JorgeB Posted July 13, 2023 Share Posted July 13, 2023 Just now, jmbailey2000 said: IS there a command line way to get that info? Yes, click the link in diagnostics. Quote Link to comment
jmbailey2000 Posted July 13, 2023 Author Share Posted July 13, 2023 7 minutes ago, JorgeB said: Yes, click the link in diagnostics. Ah. Got it. Will do and Thanks!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.