RichardIstSauer Posted September 14, 2023 Share Posted September 14, 2023 Hello, since a certain time the Apps tab loading very slow (around 20s) and the check for updates in the docker tab loading forever. Plugin update check works. What can possibly cause it? 1 Quote Link to comment
JorgeB Posted September 15, 2023 Share Posted September 15, 2023 There's nothing out of the ordinary logged that I can see, is it the same in safe mode? Quote Link to comment
RichardIstSauer Posted September 15, 2023 Author Share Posted September 15, 2023 I will test it. Thx! Quote Link to comment
RichardIstSauer Posted September 17, 2023 Author Share Posted September 17, 2023 The same with activated safe mode. Quote Link to comment
Squid Posted September 17, 2023 Share Posted September 17, 2023 Network issues? Bad Cabling? Quote Link to comment
RichardIstSauer Posted September 29, 2023 Author Share Posted September 29, 2023 It could be network issues, but plugins update check works? How I can check if it caused by network issues? Quote Link to comment
bitswall Posted September 29, 2023 Share Posted September 29, 2023 You can open a terminal, run top command to check whether CPU is high. I guessed your cpu is very high. Quote Link to comment
RichardIstSauer Posted September 29, 2023 Author Share Posted September 29, 2023 It's normal usage. Quote Link to comment
bitswall Posted October 16, 2023 Share Posted October 16, 2023 Hi guys, did you try to stop docker service and check this issue again ? I found docker service on unraid is very unstable. I have meet many problems about unraid docker service. I highly recommand you install VM which run docker on it rather than unraid self. Quote Link to comment
RichardIstSauer Posted October 20, 2023 Author Share Posted October 20, 2023 Yes already done this. Also tested with safe mode. Quote Link to comment
Squid Posted October 21, 2023 Share Posted October 21, 2023 On 10/16/2023 at 12:18 PM, bitswall said: I found docker service on unraid is very unstable. I have meet many problems about unraid docker service. How so? TBH if you're finding the docker subsystem to be unstable you're the exception rather than the rule and is most likely to be hardware issues. Quote Link to comment
bitswall Posted October 21, 2023 Share Posted October 21, 2023 11 hours ago, Squid said: How so? TBH if you're finding the docker subsystem to be unstable you're the exception rather than the rule and is most likely to be hardware issues. Hi, I create the twoo cases. one is in bug report, the other is in this section. I also uploaded my complete docker configuration and diag files. In bug report section, the system told me the bug resolved in my current version(6.12.4). why I have met the high cpu yet ? There is no any response with the other case which I uploaded many files. Quote Link to comment
RichardIstSauer Posted May 14 Author Share Posted May 14 If I check for updates, the DockerUpdate.php fails with a 500 error. Quote Link to comment
RichardIstSauer Posted July 2 Author Share Posted July 2 Does nobody have a solution? Quote Link to comment
Solution JorgeB Posted July 3 Solution Share Posted July 3 I would try with a stock install, that will confirm if the issue is /config related. Quote Link to comment
RichardIstSauer Posted July 3 Author Share Posted July 3 How I should do that? I understand that I should install a new Unraid image on the stick. But which files I should save, so that nothing gets broken? Quote Link to comment
itimpi Posted July 3 Share Posted July 3 2 minutes ago, RichardIstSauer said: How I should do that? I understand that I should install a new Unraid image on the stick. But which files I should save, so that nothing gets broken? All your settings (and licence) are in the 'config' folder on the flash drive so save that first. Quote Link to comment
JorgeB Posted July 3 Share Posted July 3 6 minutes ago, RichardIstSauer said: But which files I should save, so that nothing gets broken? You can also try with a different flash drive. Quote Link to comment
RichardIstSauer Posted July 3 Author Share Posted July 3 Okay thx, but when I will start the Unraid server with a new stick. Nothing get messed up? Like the drive configuration? Quote Link to comment
itimpi Posted July 3 Share Posted July 3 3 minutes ago, RichardIstSauer said: Okay thx, but when I will start the Unraid server with a new stick. Nothing get messed up? Like the drive configuration? At that point there will be nothing assigned so Unraid will not touch the drives. Quote Link to comment
RichardIstSauer Posted July 3 Author Share Posted July 3 But if no hard disc configuration is selected, the array will not run. And therefore neither will the Docker. Or am I misunderstanding this? And so I can't even check whether the Docker update service is working. Quote Link to comment
itimpi Posted July 3 Share Posted July 3 As I understood it the purpose of this test was to see if the tabs are slow in a clean install? Quote Link to comment
RichardIstSauer Posted July 3 Author Share Posted July 3 The slow apps tab randomly disappeared after an Unraid update, but the DockerUpdate check still does not work. For this I have opened a new topic but forgot to close the old one. Quote Link to comment
JorgeB Posted July 3 Share Posted July 3 You also posted in this thread about the update problem first, hence why I locked the other one, but if the problem now is only the update, it may still be worth trying to redo the flash drive, but first try Try changing your DNS server to 208.67.222.222 and 208.67.220.220 instead of using your router. Settings - Network Settings Quote Link to comment
RichardIstSauer Posted July 3 Author Share Posted July 3 I use Cloudflare DNS. But when I redo the flash drive what is about this problem? 22 minutes ago, RichardIstSauer said: But if no hard disc configuration is selected, the array will not run. And therefore neither will the Docker. Or am I misunderstanding this? And so I can't even check whether the Docker update service is working. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.