stubennatter Posted October 17, 2023 Share Posted October 17, 2023 Hallo, habe zwei ZFS Pool und einer ist beschädigt durch einen reboot geworden. Aber der hängt seit Tagen und macht nix mehr. Wie kann man dies lösen? pool: fsp2 state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Sat Oct 14 11:36:17 2023 220T scanned at 4.46G/s, 191T issued at 3.88G/s, 261T total 49.6M resilvered, 73.32% done, 05:06:36 to go config: NAME STATE READ WRITE CKSUM fsp2 DEGRADED 0 0 0 raidz1-0 DEGRADED 1.45K 1.24K 0 ata-ST18000NM000J-2TV103_ZR5CJZEG ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CL9NE ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CPHVP ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CSXJ4 ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CVH9N ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CW3JS ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CWN6K ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A07EFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A06YFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_52G0A113FJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_62X0A0B9FJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_7280A02HFJDH ONLINE 2.76K 3.52K 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH UNAVAIL 4.53K 4.86K 0 ata-TOSHIBA_MG09ACA18TE_62X0A0PGFJDH ONLINE 1.38K 1.49K 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A04AFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_72A0A006FJDH ONLINE 8.27K 8.89K 1 (awaiting resilver) Danke. Quote Link to comment
cyp2k Posted October 18, 2023 Share Posted October 18, 2023 Moin, die "ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH" wird aktuell als "UNAVAILABLE" ausgewiesen. Gibt es die Platte denn noch? Was gibt denn ein "zpool status -v" über die Unraid Console zurück? Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 Morgen, ja HDD ist dran und wird auch bei unassigned devices als gemounted angezeigt und Status kann ich mir ansehen und grün Disk Serial: TOSHIBA_MG09ACA18TE_52G0A0R8FJDH (sdbk) - SATA Mount Point: fsp2 (mounted) zpool status-v bringt folgende Meldung errors: List of errors unavailable: pool I/O is currently suspended Quote Link to comment
alturismo Posted October 18, 2023 Share Posted October 18, 2023 14 minutes ago, stubennatter said: ja HDD ist dran und wird auch bei unassigned devices als gemounted angezeigt und Status kann ich mir ansehen und grün bei UAD mounted und ist nicht mehr im Pool ? ich nutze jetzt kein zfs ... aber das hört sich für mich nicht ganz richtig an ... vielleicht mal ein screenshot deines Main Tabs wo die Platten gelistet sind und mounted sind ... Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 habe noch unraid 6.11.5 und zfs mit dem zfs plugin. Da sind alle HDD's die im pool sind bei UAD gelistet, das passt. Und habe mal zpool clear gemacht, da wurde jetzt die ata-TOSHIBA_MG09ACA18TE_72A0A006FJDH als unavil angezeigt. Aber Prozente haben sich nicht verändert. Quote Link to comment
alturismo Posted October 18, 2023 Share Posted October 18, 2023 2 minutes ago, stubennatter said: habe noch unraid 6.11.5 und zfs mit dem zfs plugin. 3 minutes ago, stubennatter said: Da sind alle HDD's die im pool sind bei UAD gelistet, das passt. dann ergibt das Sinn da bin ich dann komplett raus ... hatte das zwar auch mal mit dem plugin getestet, kann aber hierzu nichts produktives sagen ... da können andere sicher ggf. besser helfen, wobei man langsam über ein Update nachdenken kann ... Quote Link to comment
cyp2k Posted October 18, 2023 Share Posted October 18, 2023 1 hour ago, stubennatter said: errors: List of errors unavailable: pool I/O is currently suspended Ich hätte als nächstes versucht, die Platte aus dem "UNAVAILABLE" Stauts zu bekommen => zpool online fsp2 ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH Wird aber vermutlich nicht klappen, weil der Pool suspended ist. Kenne mich mit diesem ZFS Plugin nicht aus. Laufen über das Plugin die ZFS Pools unabhängig vom Unraid Array? Und ganz wichtig, hast du ein Backup oder ist das eine OP am offenen Herzen? Quote Link to comment
ich777 Posted October 18, 2023 Share Posted October 18, 2023 9 hours ago, stubennatter said: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Sat Oct 14 11:36:17 2023 220T scanned at 4.46G/s, 191T issued at 3.88G/s, 261T total 49.6M resilvered, 73.32% done, 05:06:36 to go @JorgeB can you please take a look at this? Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 Wie du vermutet hattest ja der sagt das er beschäftigt ist. Sind keine wichtigen Daten drauf, wenn’s aber zu retten ist wäre es natürlich schön 😂😎 Quote Link to comment
cyp2k Posted October 18, 2023 Share Posted October 18, 2023 Mal schauen was JorgeB dazu meint. Wahrscheinlich wird es erst einmal auf einen Reboot hinauslaufen und der Resilver Prozess startet von vorne. Naturlich ohne Garantie, dass er dann durchläuft. Mir persönlich ist das Layout mit so vielen Platten in einem Pool zu Hardcore. In einem Fehlerfall ist ja alleine für das Resilver (je nach Poolauslastung) 40+ Stunden Dauerstress aller Platten + Daumen drücken, dass nicht noch eine die Grätsche macht, angesagt Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 Okay da warten wir. Wie geschrieben nix wildes drauf und zfs vielleicht sogar übertrieben. Habe halt 28er Array und dann paar drives als Pool und wollte ZFS mal testen vor einem Jahr und um vielleicht etwas sicherer zu sein als die Pooldrive die ich alle habe. Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 That doesn't look very good, where's the missing disk? Also errors on multiple other disks, please post the diagnostics. P.S. please use code tags to post thing like zpool output. 1 Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 6 minutes ago, JorgeB said: P.S. please use code tags to post thing like zpool output. it mein only Thinge with zpool or the full file? Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 Code tags are just for better readability, I've edited your post above, see the difference. For the diags post the complete zip. 1 Quote Link to comment
ich777 Posted October 18, 2023 Share Posted October 18, 2023 2 hours ago, stubennatter said: it mein only Thinge with zpool or the full file? Poste bitte deine Diagnostics: Tools -> Diagnostics -> Download Danach ziehst du bitte das zip file einfach hier in die Textbox im Forum. Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 Sorry hat etwas gedauert. Bin unterwegs gewesen. serverstation-diagnostics-20231018-1443.zip Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 Syslog is showing issues with multiple disks like this: Oct 18 12:55:12 ServerStation kernel: sd 8:0:61:0: Power-on or device reset occurred This is usually a power/connection problem, check/replace cables or swap slots for the four affected disks: 17 hours ago, stubennatter said: ata-TOSHIBA_MG09ACA18TE_7280A02HFJDH ONLINE 2.76K 3.52K 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH UNAVAIL 4.53K 4.86K 0 ata-TOSHIBA_MG09ACA18TE_62X0A0PGFJDH ONLINE 1.38K 1.49K 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_72A0A006FJDH ONLINE 8.27K 8.89K 1 (awaiting resilver) Then run a new scrub, if there are still read/write errors post new diags. 1 Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 Live of Power down first? Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 Better to power down first, also see if those 4 disks share anything in common, like a miniSAS cable or power splitter, if they do it would be the first thing to replace. 1 Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 ok thank you, and scrub start automatic new? Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 It should, but if it doesn't start one manually: zpool scrub fsp2 1 Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 (edited) the power problem was because I reboot the server for clean diagnostic and after that all disks runing and no UNAVAIL and log from each disk had no power problem, but scrub is still in progress and not changed % pool: fsp2 state: ONLINE status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Sat Oct 14 11:36:17 2023 27.8T scanned at 2.72G/s, 25.8T issued at 2.52G/s, 261T total 34.2M resilvered, 9.88% done, 1 days 02:32:23 to go config: NAME STATE READ WRITE CKSUM fsp2 ONLINE 0 0 0 raidz1-0 ONLINE 1.05K 876 0 ata-ST18000NM000J-2TV103_ZR5CJZEG ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CL9NE ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CPHVP ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CSXJ4 ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CVH9N ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CW3JS ONLINE 0 0 0 (resilvering) ata-ST18000NM000J-2TV103_ZR5CWN6K ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A07EFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A06YFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_52G0A113FJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_62X0A0B9FJDH ONLINE 0 0 2 (resilvering) ata-TOSHIBA_MG09ACA18TE_7280A02HFJDH ONLINE 0 0 2 (resilvering) ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH ONLINE 1.26K 1.22K 0 (awaiting resilver) ata-TOSHIBA_MG09ACA18TE_62X0A0PGFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_82T0A04AFJDH ONLINE 0 0 0 (resilvering) ata-TOSHIBA_MG09ACA18TE_72A0A006FJDH ONLINE 2.54K 3.15K 2 (awaiting resilver) Edited October 18, 2023 by stubennatter Quote Link to comment
JorgeB Posted October 18, 2023 Share Posted October 18, 2023 20 minutes ago, stubennatter said: ata-TOSHIBA_MG09ACA18TE_52G0A0R8FJDH ONLINE 1.26K 1.22K 0 (awaiting resilver) ata-TOSHIBA_MG09ACA18TE_72A0A006FJDH ONLINE 2.54K 3.15K 2 (awaiting resilver) New read and write errors on these two disks, so there's still a problem, likely a power/connection issue. 1 Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 hm okay Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB) Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] 4096-byte physical blocks Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] Write Protect is off Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] Mode Sense: 7f 00 10 08 Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 18 12:56:28 ServerStation kernel: sdet: sdet1 sdet9 Oct 18 12:56:28 ServerStation kernel: sd 8:0:64:0: [sdet] Attached SCSI disk Oct 18 12:56:29 ServerStation zed[41320]: zed_udev_monitor: skip /dev/sdet since it has a gpt partition already Oct 18 12:56:31 ServerStation zed[41320]: zed_udev_monitor: /dev/sdet9 sectors 16384 < 131072 (minimum) Oct 18 12:56:31 ServerStation zed[41320]: #011dev_name: /dev/sdet1 Oct 18 12:56:31 ServerStation zed[41320]: #011path: /devices/pci0000:80/0000:80:03.1/0000:85:00.0/host8/port-8:1/expander-8:1/port-8:1:31/end_device-8:1:31/target8:0:64/8:0:64:0/block/sdet/sdet1 Oct 18 12:57:40 ServerStation emhttpd: TOSHIBA_MG09ACA18TE_52G0A0R8FJDH (sdet) 512 35156656128 Oct 18 12:57:40 ServerStation emhttpd: read SMART /dev/sdet Quote Link to comment
stubennatter Posted October 18, 2023 Author Share Posted October 18, 2023 It would be a power problem. but I need more time to upgrade. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.