October 30, 20205 yr 9 minutes ago, dlandon said: If the container command: /usr/bin/nvidia-smi does not show the nvidia gpu, then you need to find out why and get it resolved. Do you have the Unraid nvidia plugin installed properly for your gpu? yes - my plex container works fine. I am going back through all steps again as I figured i screwed up something somewhere. Currently running ./opencv.sh again and hoping for different result this time (changed the deb file versions for this process).
October 30, 20205 yr Just now, repomanz said: yes - my plex container works fine. I am going back through all steps again as I figured i screwed up something somewhere. Currently running ./opencv.sh again and hoping for different result this time (changed the deb file versions for this process). i compiled it yesterday and i noticed there was a dependency issue with the libcudnn7_7.6.5.32-1+cuda10.2_amd64.deb apt --fix-broken install fixed it
October 30, 20205 yr 31 minutes ago, Jaburges said: i compiled it yesterday and i noticed there was a dependency issue with the libcudnn7_7.6.5.32-1+cuda10.2_amd64.deb apt --fix-broken install fixed it did you run this after compile/building step? (21% building atm)
October 30, 20205 yr 1 minute ago, repomanz said: did you run this after compile/building step? (21% building atm) i spotted it in the logs on screen when running the opencv.sh script
October 31, 20205 yr quick question about the GPU enabled container. I changed cpu pinning on the container today and it appears to have started an install again. Do I need to run the ./opencv.sh script again?
October 31, 20205 yr Author 2 hours ago, repomanz said: quick question about the GPU enabled container. I changed cpu pinning on the container today and it appears to have started an install again. Do I need to run the ./opencv.sh script again? Set the contents of the opencv_ok file to 'yes' and opencv.sh will be run whenever it is necessary and you don't need to be concerned about if it needs to be re-compiled.
November 1, 20205 yr During restarting , this ZM docker performs updates every time, would it be possible to avoid these updates ? eg : ... Get:58 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 libmysofa0 amd64 0.6~dfsg0-3+deb10u1build1 [38.5 kB] .... Get:62 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 python-urllib3 all 1.22-1ubuntu0.18.04.2 [86.0 kB] Preconfiguring packages ... .... on the other way, would it be possible to performs this kind of updates every month only or something like that. In advance thx Edited November 1, 20205 yr by dje2006dje fix typo error
November 2, 20205 yr Author 55 minutes ago, dje2006dje said: During restarting , this ZM docker performs updates every time, would it be possible to avoid these updates ? No, because ZM is exposed the Internet, it is imperative that security updates be applied when available. Normally very quick.
November 3, 20205 yr Hi @dlandon would you kindly help me debug my opencv Zoneminder install? I have attached the zip file as instructed in the logs. I cannot get Cudnn to show as enabled in the cmake output. I have been working on this for a solid day and am relatively new with ZM and would greatly appreciate any help getting GPU support enabled. Thank you in advance! GTK+: NO -- VTK support: NO -- -- Media I/O: -- ZLib: build (ver 1.2.11) -- JPEG: libjpeg-turbo (ver 2.0.2-62) -- WEBP: build (ver encoder: 0x020e) -- PNG: build (ver 1.6.37) -- TIFF: build (ver 42 - 4.0.10) -- JPEG 2000: build (ver 1.900.1) -- OpenEXR: build (ver 2.3.0) -- HDR: YES -- SUNRASTER: YES -- PXM: YES -- PFM: YES -- -- Video I/O: -- DC1394: NO -- FFMPEG: NO -- avcodec: NO -- avformat: NO -- avutil: NO -- swscale: NO -- avresample: NO -- GStreamer: NO -- v4l/v4l2: YES (linux/videodev2.h) -- -- Parallel framework: pthreads -- -- Trace: YES (with Intel ITT) -- -- Other third-party libraries: -- Intel IPP: 2019.0.0 Gold [2019.0.0] -- at: /root/opencv/build/3rdparty/ippicv/ippicv_lnx/icv -- Intel IPP IW: sources (2019.0.0) -- at: /root/opencv/build/3rdparty/ippicv/ippicv_lnx/iw -- Lapack: NO -- Eigen: NO -- Custom HAL: NO -- Protobuf: build (3.5.1) -- -- NVIDIA CUDA: YES (ver 11.0, CUFFT CUBLAS FAST_MATH) -- NVIDIA GPU arch: 30 35 37 50 52 60 61 70 75 -- NVIDIA PTX archs: -- -- cuDNN: NO -- -- OpenCL: YES (no extra features) -- Include path: /root/opencv/3rdparty/include/opencl/1.2 -- Link libraries: Dynamic load -- -- Python (for build): /usr/bin/python3 -- -- Java: -- ant: NO -- JNI: NO -- Java wrappers: NO -- Java tests: NO -- -- Install to: /usr/local -- ----------------------------------------------------------------- -- -- Configuring incomplete, errors occurred! See also "/root/opencv/build/CMakeFiles/CMakeOutput.log". See also "/root/opencv/build/CMakeFiles/CMakeError.log". opencv.zip
November 3, 20205 yr 12 minutes ago, Madman2012 said: Hi @dlandon would you kindly help me debug my opencv Zoneminder install? I have attached the zip file as instructed in the logs. I cannot get Cudnn to show as enabled in the cmake output. I have been working on this for a solid day and am relatively new with ZM and would greatly appreciate any help getting GPU support enabled. Thank you in advance! Did you use the right versions of the files - it looks like CUDA 11 vs 10.2. check the top of the opencv.sh and notice the file names CUDNN_RUN=libcudnn7_7.6.5.32-1+cuda10.2_amd64.deb CUDNN_DEV=libcudnn7-dev_7.6.5.32-1+cuda10.2_amd64.deb CUDA_TOOL=cuda-repo-ubuntu1804-10-2-local-10.2.89-440.33.01_1.0-1_amd64.deb CUDA_PIN=cuda-ubuntu1804.pin CUDA_KEY=/var/cuda-repo-10-2-local-10.2.89-440.33.01/7fa2af80.pub CUDA_VER=10.2 Are your file names the same? Use the archived files list on the nvidia site to locate them - i'm assuming i'm not allowed to copy them here due to licensing etc etc. If you downloaded newer versions, did you change the filenames? (I have no idea what is / isnt supported - all I know its a PITA if you mismatch the GPU driver, CUDA and CUDNN stuff)
November 3, 20205 yr @dlandon any reason why ffmpeg -hwaccels doesnt show 'cuda' or 'cuvid' - I can't figure out how to enable it? assuming it needs building from source (although last time I built the container from scratch it showed up without any additional work) root@e5b91be90299:/# ffmpeg -hwaccels ffmpeg version 4.3.1-0york0~18.04 Copyright (c) 2000-2020 the FFmpeg developers built with gcc 7 (Ubuntu 7.5.0-3ubuntu1~18.04) configuration: --prefix=/usr --extra-version='0york0~18.04' --toolchain=harden ed --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --a rch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter= resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enabl e-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec 2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfrib idi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enabl e-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-l ibpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-li bshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --e nable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable -libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --en able-libzimg --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-l ibiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared libavutil 56. 51.100 / 56. 51.100 libavcodec 58. 91.100 / 58. 91.100 libavformat 58. 45.100 / 58. 45.100 libavdevice 58. 10.100 / 58. 10.100 libavfilter 7. 85.100 / 7. 85.100 libavresample 4. 0. 0 / 4. 0. 0 libswscale 5. 7.100 / 5. 7.100 libswresample 3. 7.100 / 3. 7.100 libpostproc 55. 7.100 / 55. 7.100 Hardware acceleration methods: vdpau vaapi drm opencl
November 3, 20205 yr I had the same result as you before I tried to compile myself and ended up where I was in my earlier post. Sent from my iPhone using Tapatalk
November 6, 20205 yr On 11/3/2020 at 1:31 PM, Jaburges said: @dlandon any reason why ffmpeg -hwaccels doesnt show 'cuda' or 'cuvid' - I can't figure out how to enable it? assuming it needs building from source (although last time I built the container from scratch it showed up without any additional work) root@e5b91be90299:/# ffmpeg -hwaccels ffmpeg version 4.3.1-0york0~18.04 Copyright (c) 2000-2020 the FFmpeg developers built with gcc 7 (Ubuntu 7.5.0-3ubuntu1~18.04) configuration: --prefix=/usr --extra-version='0york0~18.04' --toolchain=harden ed --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --a rch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter= resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enabl e-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec 2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfrib idi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enabl e-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-l ibpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-li bshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --e nable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable -libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --en able-libzimg --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-l ibiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared libavutil 56. 51.100 / 56. 51.100 libavcodec 58. 91.100 / 58. 91.100 libavformat 58. 45.100 / 58. 45.100 libavdevice 58. 10.100 / 58. 10.100 libavfilter 7. 85.100 / 7. 85.100 libavresample 4. 0. 0 / 4. 0. 0 libswscale 5. 7.100 / 5. 7.100 libswresample 3. 7.100 / 3. 7.100 libpostproc 55. 7.100 / 55. 7.100 Hardware acceleration methods: vdpau vaapi drm opencl @dlandon the issue appears to be that running the opencv.sh doesnt seem to install everything. i should be able to (I believe) run nvcc --version and produce a result, but it does not "nvcc: command not found" I've attempted this from a fresh docker numerous times. can you confirm A) if anything changed B) what cuda verson is recommended
November 7, 20205 yr On 11/3/2020 at 4:27 PM, Jaburges said: Did you use the right versions of the files - it looks like CUDA 11 vs 10.2. check the top of the opencv.sh and notice the file names CUDNN_RUN=libcudnn7_7.6.5.32-1+cuda10.2_amd64.deb CUDNN_DEV=libcudnn7-dev_7.6.5.32-1+cuda10.2_amd64.deb CUDA_TOOL=cuda-repo-ubuntu1804-10-2-local-10.2.89-440.33.01_1.0-1_amd64.deb CUDA_PIN=cuda-ubuntu1804.pin CUDA_KEY=/var/cuda-repo-10-2-local-10.2.89-440.33.01/7fa2af80.pub CUDA_VER=10.2 Are your file names the same? Use the archived files list on the nvidia site to locate them - i'm assuming i'm not allowed to copy them here due to licensing etc etc. If you downloaded newer versions, did you change the filenames? (I have no idea what is / isnt supported - all I know its a PITA if you mismatch the GPU driver, CUDA and CUDNN stuff) I had to use Cuda 11 since I am on unraid beta 30 and that was what the nvidia smi reported (below), please let me know if it is not supported? It looks like it have correct versions of the files in the script variables. I can get Cuda enabled but CUDNN does not come on like before. root@d39bb87ce369:/# nvidia-smi Sat Nov 7 10:03:47 2020 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 450.80.02 Driver Version: 450.80.02 CUDA Version: 11.0 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 Quadro P2200 Off | 00000000:04:00.0 Off | N/A | | 55% 50C P0 22W / 75W | 978MiB / 5059MiB | 1% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| +-----------------------------------------------------------------------------+
November 8, 20205 yr On 11/7/2020 at 7:05 AM, Madman2012 said: I had to use Cuda 11 since I am on unraid beta 30 Did you download the matching files from nvidia and change the variables I listed above?
November 8, 20205 yr On 11/6/2020 at 3:51 PM, Jaburges said: @dlandon the issue appears to be that running the opencv.sh doesnt seem to install everything. i should be able to (I believe) run nvcc --version and produce a result, but it does not "nvcc: command not found" I've attempted this from a fresh docker numerous times. can you confirm A) if anything changed B) what cuda verson is recommended any guidance would be greatly appreciated - do others compile FFMPEG themselves (as I didnt used to have to)
November 9, 20205 yr Yes downloaded the right version of the files after registering on NVIDIAs site and changed the variables in the script to the correct names and placed the files in the correct directory. Sent from my iPhone using Tapatalk
November 10, 20205 yr 13 hours ago, Madman2012 said: Yes downloaded the right version of the files after registering on NVIDIAs site and changed the variables in the script to the correct names and placed the files in the correct directory. Sent from my iPhone using Tapatalk you looked into this: Failed to find installed gflags CMake configuration, searching for gflags build directories exported with CMake. -- Failed to find gflags - Failed to find an installed/exported CMake configuration for gflags, will perform search for installed gflags components. -- Failed to find gflags - Could not find gflags include directory, set GFLAGS_INCLUDE_DIR to directory containing gflags/gflags.h -- Failed to find glog - Could not find glog include directory, set GLOG_INCLUDE_DIR to directory containing glog/logging.h -- Module opencv_sfm disabled because the following dependencies are not found: Eigen Glog/Gflags Edited November 10, 20205 yr by Jaburges
November 24, 20205 yr Hello. I've installed Zoneminder on my Unraid, but I've changed default Data Path and now it's pointing different storage. After this operation web ui seems to not working correctly. Some icon/titles/names are missing or are showing wrong. How it can be corrected?
November 24, 20205 yr Author 1 hour ago, wojcioo said: Hello. I've installed Zoneminder on my Unraid, but I've changed default Data Path and now it's pointing different storage. After this operation web ui seems to not working correctly. Some icon/titles/names are missing or are showing wrong. How it can be corrected? Show how you mapped the config and data paths.
November 24, 20205 yr 28 minutes ago, dlandon said: Show how you mapped the config and data paths. Synology is my smb share....
November 24, 20205 yr Author 3 minutes ago, wojcioo said: Synology is my smb share.... Why are you mapping to a remote share? That's not a good idea. If the remote server goes offline, Zoneminder will not have access to the path and will have all kinds of issues. Map it to a local disk and set up a user script to copy it to the Synology on a schedule.
December 3, 20205 yr On 11/6/2020 at 6:51 PM, Jaburges said: @dlandon the issue appears to be that running the opencv.sh doesnt seem to install everything. i should be able to (I believe) run nvcc --version and produce a result, but it does not "nvcc: command not found" I've attempted this from a fresh docker numerous times. can you confirm A) if anything changed B) what cuda verson is recommended I am having the same issue. I am running UnRAID 6.9b35. I started my docker with almost all the same parameters I use to start my plex container (where I do have CUDA support). docker run -d --name='Zoneminder' --net='bridge' --privileged=true -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'PUID'='99' -e 'PGID'='100' -e 'INSTALL_HOOK'='1' -e 'INSTALL_TINY_YOLOV3'='0' -e 'INSTALL_YOLOV3'='0' -e 'INSTALL_TINY_YOLOV4'='0' -e 'INSTALL_YOLOV4'='1' -e 'INSTALL_FACE'='0' -e 'NVIDIA_VISIBLE_DEVICES'='GPU-b94fe274-0c08-930f-c3c3-7acbb123d8f3' -e 'SHMEM'='50%' -p '18443:443/tcp' -p '19000:9000/tcp' -v '/mnt/user/appdata/Zoneminder':'/config':'rw' -v '/mnt/user/appdata/Zoneminder/data':'/var/cache/zoneminder':'rw' --log-opt max-size=50m --log-opt max-file=1 --runtime=nvidia --gpus=1 'dlandon/zoneminder' Inside my Zoneminder container: +-----------------------------------------------------------------------------+ | NVIDIA-SMI 455.38 Driver Version: 455.38 CUDA Version: N/A | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 GeForce GTX 105... Off | 00000000:2B:00.0 Off | N/A | | 0% 40C P0 N/A / 72W | 0MiB / 4037MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ And inside my plex container +-----------------------------------------------------------------------------+ | NVIDIA-SMI 455.38 Driver Version: 455.38 CUDA Version: 11.1 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 GeForce GTX 105... Off | 00000000:2B:00.0 Off | N/A | | 0% 40C P0 N/A / 72W | 0MiB / 4037MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ I can't quite figure out what is different between the plex container and the zoneminder container as to why the zoneminder one does not have CUDA Edited December 3, 20205 yr by sivart
December 3, 20205 yr 59 minutes ago, sivart said: I can't quite figure out what is different between the plex container and the zoneminder container as to why the zoneminder one does not have CUDA check the versions all match up (and the files you have in /opencv are correct) I notice you are using a driver 455.38 (so I think that is Unraid beta build) opencv variables in the opencv install script too so i'm assuming given the driver version is forced by the unraid build, you'll need to match the CUDA version like the plex one using 11.1 my issue is rebuilding FFMPEG to use cuda or cuvid - I have to rebuild it from source, but with all the libraries (and its overly complicated)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.