March 18, 20206 yr 4 hours ago, Squid said: You're accessing your server via https. Using a custom tab that accesses via http will result in that as its a security violation enforced via browsers. You can set it to New Tab to get around that. Thanks for the info. How can I set it to open a new tab?
March 18, 20206 yr 3 minutes ago, Squid said: Hit the dropdown within the plugin's settings. Ah, thanks. I couldn't see the dropdown arrow as I'm using a dark mode extension for Chrome and it must have messed up the colours.
March 31, 20206 yr Hi, Thanks a lot for this plugin. I think I have the same blanck page problem as some others who try to add http tab when the unray server is accessed by https. So I started by creating a new tab for Sabnzb, I added a new port in the Sabnzb container then I mapped this new port to https access in the Sabnzb configuration. now it works. 🤘 My question is : Should I do the same for all others container applications ? because I have no clue how to do in plex or krusader... Do you have maybe an easier workaround ? Thanks a lot and take care Fab
April 16, 20206 yr Firstly, cool plugin, well done. My apologies if this has been already asked and I did look at the link on the tab and noticed it was using a JS function, so my example below would not work, but you get the idea. It would be really cool if you could set the link target (IE <a href="..." target="plex">) so that when you choose the "open in new tab" option, it would use the tab/window you already have open from the last time you clicked the link, instead of opening a new window every time you click the link. Thank you in advance for your consideration.
June 28, 20206 yr Hey Squid...I'm trying to have a custom tab point to my grafana dash. Server is NOT accessed via HTTPS. I add the tab, have it go to the URL, save, when I try to go I get this: This is the URL in question: http://<serverip>:3000/d/000000001/unraid-system-dashboard?orgId=1&refresh=30s Works fine when put into a browser tab on any browser on my system. Any thoughts?
June 28, 20206 yr 27 minutes ago, Squid said: I would just go with http://<serverip>:3000 and then see if that works Just tried that: Get the same white box.
June 29, 20206 yr 18 hours ago, Squid said: I would just go with http://<serverip>:3000 and then see if that works Getting the same type of thing when using a URL to my SABnzbd docker (http://192.168.0.19/SABnzbd) But it's working properly with my Medusa docker (http://192.168.0.19/Medusa)
June 29, 20206 yr Author Has to have something to do with the reverse proxy you're using. Not able to help with that unfortunately.
June 29, 20206 yr 1 hour ago, Squid said: Has to have something to do with the reverse proxy you're using. Not able to help with that unfortunately. im not using a reverse proxy. this is all internal traffic only
June 29, 20206 yr Author 7 hours ago, JasonK said: http://192.168.0.19/SABnzbd You're doing something, because that is not a URL to the stock SabNZBD You would normally specify a port.
June 29, 20206 yr 48 minutes ago, Squid said: You're doing something, because that is not a URL to the stock SabNZBD You would normally specify a port. Apologies - I just right clicked on the link in the bar in the dash. Here's the config from the plugin showing there's a port (medusa also has a port as you see and it works - which is working as mentioned earlier):
June 30, 20206 yr 12 hours ago, JasonK said: Apologies - I just right clicked on the link in the bar in the dash. Here's the config from the plugin showing there's a port (medusa also has a port as you see and it works - which is working as mentioned earlier): Quick note - the 192.168.0.65 is an internal IP on my network - and is actually a VM running on unraid - could it be some weird networking issue within unraid preventing it from communicating? 0.19 is the ip of the server. The server does have a default gateway set to 0.1 (my router)...hmmm.... I can get to it without issue from other computers, my phone, etc, all on the same network.
June 30, 20206 yr Author Probably you're getting nailed by a cross-site security provision enforced by the browsers which won't allow scripts from one domain to be executed on another. Depends upon how the remote site is actually programmed as to whether this trips the blocking.
October 15, 20205 yr On my server, I have two NICs, each set to a different IP. Is there a way I can have the URLs setup so that it uses which ever IP it's currently under? Like a relative address instead of an absolute address if that makes sense. (The reason I'm needing this is because sometimes one connection goes down and I need to use the other.)
November 15, 20205 yr Hi, It does not work for URL with credentials, page is showing but can't login to my server I think its a normal behavior ? or is there any tips for that ? I do not want to set my server passwordless
November 16, 20205 yr On 11/15/2020 at 11:13 AM, Meldrak said: Hi, It does not work for URL with credentials, page is showing but can't login to my server I think its a normal behavior ? or is there any tips for that ? I do not want to set my server passwordless It's a web browser issue !! Works fine with Firefox not with Edge
December 17, 20205 yr hi, i've got a problem, when i shrink the browser windows. the buttons on the right disappears, while i am using custom tabs
December 17, 20205 yr Author Expected behaviour, and built into the OS itself. If there isn't space for them, it won't display them
December 17, 20205 yr if i delete all custom tabs, i can shrink the window and all icon are still displayed. maybe there is a way that custom tabs are like the "normal" unraid tabs?
December 17, 20205 yr Author They are normal unraid tabs. The behaviour is from the buttons. If there isn't room the OS won't display them. You can gain more space by not displaying the array usage bar.
July 2, 20215 yr On 1/19/2019 at 7:04 AM, SpaceInvaderOne said: It would be awesome to be able to have a custom tab that runs a user script. Hello, I do not see in the four pages if this has already been resolved so the question arises: How can I do this?
July 10, 20214 yr Are we able to have a custom tab open within unraid? It would nice to have SabNZBD run within unraid, keeping unraids menu on top. Nevermind. Just figured it out. Edited July 10, 20214 yr by SamHill
August 5, 20214 yr On 7/10/2021 at 1:33 PM, SamHill said: Are we able to have a custom tab open within unraid? It would nice to have SabNZBD run within unraid, keeping unraids menu on top. Nevermind. Just figured it out. You were able to get a CustomTab to show SabNZBDs window properly inside the tab? What did you do to make that work? Could you show a screencap of your customtab settings for it? Thanks!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.