jowy_ham Posted June 30, 2017 Share Posted June 30, 2017 Hi, I have these 2 minor issues which I hope someone could kindly advise on what's the problem and how to fix it: 1. The "Log" button on Menu Bar will pop-up another window, but that window is always loading, nothing ever appears (blank page). But the Tools -> System Log is working fine though. I guess these info logged in the System Log are related to me clicking on the "Log" button (a couple of times) Jul 1 07:29:51 Tower root: plugin: running: anonymous Jul 1 07:29:56 Tower root: plugin: running: anonymous Jul 1 07:29:57 Tower rc.diskinfo[14908]: killing daemon with PID [4108] Jul 1 07:29:57 Tower rc.diskinfo[14915]: process started. To terminate it, type: rc.diskinfo --quit Jul 1 07:30:05 Tower emhttp: err: sendFile: sendfile /usr/local/emhttp/logging.htm: Broken pipe Jul 1 07:30:05 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin checkall Jul 1 07:30:06 Tower rc.diskinfo[15406]: process started. To terminate it, type: rc.diskinfo --quit Jul 1 07:31:19 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Jul 1 07:34:46 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Jul 1 07:35:06 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog 2. For "Preclear Disks" plugin, if there is an update (under Plugins -> Installed Plugins), when I click on the update, again another window appears, but again nothing ever appears (blank page). Usually I would have to close the whole UnRaid page and re-open a new UnRaid page then navigate to the same location, it will shows that the plugin has been updated. I've tried updating other plugins, all are working fine except this 1. I have also tried removing the "Preclear Disks" plugin and re-installing it using this: https://raw.githubusercontent.com/gfjardim/unRAID-plugins/master/plugins/preclear.disk.plg, a window will appear but nothing is shown in the window (just blank page). I have tried waiting for more than 1 hr, nothing appears. Also same issue occurs, as in On UnRaid 6.3.5 upgraded from 6.1.9. Specs: ASUSTeK COMPUTER INC. - SABERTOOTH Z77 CPU: Intel® Core™ i7-3770 CPU @ 3.40GHz HVM: Enabled IOMMU: Enabled Cache: 256 kB, 1024 kB, 8192 kB Memory: 16 GB (max. installable capacity 32 GB) Network: eth0: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.9.30-unRAID x86_64 OpenSSL: 1.0.2k Client: Windows 7 x64bit Browser : Chrome Version 58.0.3029.110 (64-bit), I've also tried on IE 11.0.9600.18665 (same issue as Chrome, pop-up window appears but nothing in the window) Appreciate some help here, Thanks in advance. Quote Link to comment
saarg Posted July 1, 2017 Share Posted July 1, 2017 Sounds like you have some anti-virus or pop-up blocker installed. Be sure to white list the unraid IP. Quote Link to comment
jowy_ham Posted July 1, 2017 Author Share Posted July 1, 2017 10 hours ago, saarg said: Sounds like you have some anti-virus or pop-up blocker installed. Be sure to white list the unraid IP. I tried incognito mode (which means pop-up blocker disabled) also cannot, tried white list the UnRaid IP for Bitdefender also cannot. Quote Link to comment
Johnny G Posted September 27, 2017 Share Posted September 27, 2017 I've been through this several times and I'm having major issues with preclearing a new disk. I'm running unRAID Pro, all disks are WD Red 4Tb 2 Parity disks 11 Data Disks 1 preclear-pending disk. I've also got 2x Sandisk 480GB SSD disks as cache devices. I'm running this one a Supermicro 846, Dual Xeon E5645, 192Gb RAM. Motherboard - X8DTL HBA - LSA SAS2008 Previously, never had any issues preclearing drives. But this time, every time I try to pre-clear I get the correct disk info up, but when I click start, I get a popup window, which immediately closes. NOTHING is written to the log, and the app sticks on "Starting ..." with the red X - I've left it overnight, nothing. Still the same. The device is recognised within unRAID correctly. Just without a log, I'm not sure what the issue is. Rebooted several times, hard and soft reboots. The only thing that is ANY different is that the current disks are all "WDC WD40EFRX-68W" - the new disk is "WDC WD40EFRX-68N" all on revision 0A82 firmware. I thought about the device limit on the HBA card, but it's recognising the drive, so it couldn't be that? If I had a log file, I'd attach it! Quote Link to comment
bonienl Posted September 27, 2017 Share Posted September 27, 2017 On 7/1/2017 at 1:54 AM, jowy_ham said: Appreciate some help here, Thanks in advance. Really sounds like adblocker and/or antivirus interfering with the GUI. Try a different browser / computer. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.