Jump to content
limetech

unRAID OS version 6.5.0-rc4 available

12 posts in this topic Last Reply

Recommended Posts

Please remember to open a new topic in this board for specific issues.

 

Version 6.5.0-rc4 2018-03-03

Management:

  • fix: accommodate buggy dhcp servers which hand out a single host IPv6 address

Version 6.5.0-rc3 2018-03-03

Summary:

  • Updated ntp which addresses some CVE's and restore default NTP enabled, referencing google public NTP servers.
  • Restored console webGUI operation.
  • Misc. bug fixes.

Base distro:

  • gawk: version 4.2.1
  • libunistring: version 0.9.9
  • libxshmfence: version 1.3
  • lxterminal: version 0.3.1
  • mesa: version 17.3.6
  • ntp: version 4.2.8p11 (CVE-2016-1549, CVE-2018-7182, CVE-2018-7170, CVE-2018-7184, CVE-2018-7185)
  • p11-kit: version 0.23.10
  • php: version 7.2.3
  • tevent: version 0.9.36
  • vte3: version 0.44.3
  • xfsprogs: version 4.15.1

Management:

  • accommodate buggy dhcp servers which hand out a single host IPv6 address
  • fix desktop gui mode by re-enabling graphics compositing due to new mesa version
  • upon upgrade strip metric value from GATEWAY if present
  • shfs: support run-time logging level change
  • webgui: Fixed regression error in Docker settings
  • webgui: Fixed version/date extraction in previous unRAID version
  • webgui: Updated tablesorter to v2.29.6 and fixed sorting issue in browser
  • webgui: Corrected PHP warnings

Version 6.5.0-rc1 2018-02-28

Summary:

  • Updated linux kernel includes more patches related to Meltdown/Spectre.
  • Refreshed base packages to latest versions.
  • We added a workaround for Safari to display CPU Load Statistics correctly.
  • We have disabled NTP by default. For new installations we suggest using 0.pool.ntp.org as described in their documentation. Note that unRAID OS will preserve the ntp.drift file across system reboots on your USB Flash boot device.
  • Resident network guru bonienl continues to make networking refinements:
    • Fixed default gateway with different metrics. Now same gateway with multiple metrics properly set up
    • Fixed route_up and route_down functions. Now adding and removing routes handles IPv6 link local addresses and it is allowed to add the same route multiple times with different metric and interface.
    • Routing table shows interface name too with default routes
    • Network settings page is updated thru a websocket (/sub/dhcp), this ensures info is always present. Another nice advantage of websockets.
    • Cleanup of network.cfg file. Only necessary settings are stored. This greatly reduces the number of entries.
    • Some fixes in the network settings page itself, better user experience.
    • IPv6 routes have their own metric value, can be set independently of IPv4
    • Docker fixes for custom networks
    • Some code cleanup
  • Another nice feature added by bonienl is the ability to downgrade to the previous unRAID-OS release.
  • Upgraded noVNC. This is very much improved, give it a try!

Base distro:

  • adwaita-icon-theme: version 3.26.1
  • at-spi2-atk: version 2.26.1
  • at-spi2-core: version 2.26.2
  • atk: version 2.26.1
  • bash: version 4.4.019
  • btrfs-progs: version v4.15.1
  • cairo: version 1.14.12
  • coreutils: version 8.29
  • cyrus-sasl: version 2.1.26 (rev3)
  • dbus: version 1.12.4
  • dhcpcd: version 7.0.1
  • docker: version 17.12.1
  • e2fsprogs: version 1.43.9
  • etc: version 15.0
  • ethtool: version 4.15
  • eudev: version 3.2.5
  • freetype: version 2.9
  • fuse: version 2.9.7 (inline_name size 64 patch)
  • gawk: version 4.2.0
  • glib2: version 2.54.3
  • glibc-solibs: version 2.27
  • glibc-zoneinfo: version 2018c
  • glibc: version 2.27
  • gnutls: version 3.6.2
  • gtk+3: version 3.22.28
  • guile: version 2.2.3
  • gzip: version 1.9
  • harfbuzz: version 1.7.5
  • hdparm: version 9.54
  • hostname: version 3.18
  • htop: version 2.1.0
  • icu4c: version 60.2
  • inetd: version 1.79s (rev10)
  • iproute2: version 4.15.0
  • iptables: version 1.6.2
  • kernel-firmware: version 20180222_7344ec9
  • kmod: version 25
  • less: version 530
  • libXcursor: version 1.1.15
  • libXfont2: version 2.0.3
  • libXres: version 1.2.0
  • libdrm: version 2.4.90
  • libevdev: version 1.5.8
  • libfastjson: version 0.99.8
  • libgcrypt: version 1.8.2
  • libjpeg-turbo: version 1.5.3
  • libmnl: version 1.0.4 (rev2)
  • libnftnl: version 1.0.9
  • libpciaccess: version 0.14
  • librsvg: version 2.42.2
  • libseccomp: version 2.3.3
  • libtasn1: version 4.13
  • libunistring: version 0.9.8
  • libvirt-php: version 0.5.4 (rev2)
  • libvirt: version 4.0.0
  • libxml2: version 2.9.7
  • libxslt: version 1.1.32
  • logrotate: version 3.13.0
  • lvm2: version 2.02.176
  • lsof: version 4.90
  • lz4: version 1.8.1.2
  • mc: version 4.8.20
  • mesa: version 17.3.4
  • mpfr: version 4.0.1
  • nano: version 2.9.3
  • net-tools: version 20170208_479bb4a
  • nettle: version 3.4
  • network-scripts: version 15.0 (rev6)
  • ntp: version 4.2.8p10 (rev3)
  • openldap-client: version 2.4.45
  • pango: version 1.40.14
  • patch: version 2.7.6
  • pciutils: version 3.5.6
  • php: version 7.2.2
  • pkgtools: version 15.0 (rev5)
  • qemu: version 2.11.1
  • rpcbind: version 0.2.4 (rev3)
  • rsync: version 3.1.3 (CVE-2017-16548, CVE-2018-5764)
  • rsyslog: version 8.33.0
  • samba: version 4.7.5 (with time machine fullsync patch)
  • shadow: version 4.2.1 (rev3)
  • shared-mime-info: version 1.9
  • smartmontools: version 6.6
  • spice-protocol: version 0.12.13
  • spice: version 0.14.0
  • sqlite: version 3.22.0
  • sudo: version 1.8.22
  • sysvinit-scripts: version 2.1 (rev6)
  • talloc: version 2.1.11
  • tar: version 1.30
  • tdb: version 1.3.15
  • tevent: version 0.9.34
  • traceroute: version 2.1.0
  • usbutils: version 009
  • util-linux: version 2.31.1
  • wget: version 1.19.4 (rev2)
  • xf86-video-vesa: version 2.4.0
  • xfsprogs: version 4.15.0
  • xkeyboard-config: version 2.22
  • xorg-server: version 1.19.6
  • xterm: version 331

Linux kernel:

  • version 4.14.23 (with vmwrite error patch)

Management:

  • disable NTP by default
  • hide php warnings for now since php 7.2 is more strict
  • update smartmontools drivedb and hwdata/{pci.ids,usb.ids,oui.txt,manuf.txt}
  • webgui: noVNC: version 1.0.0
  • webgui: dashboard cpu bar updates using Safari browser (now uses SSE instead of Websockets)
  • webgui: Add ability for pluginMan to not install the .plg file
  • webgui: Enhancements to Docker custom network settings
  • webgui: enhancement to diagnostics: Don't anonymize system share names (such as appdata,domains,isos,system)
  • webgui: Fixed container update hanging when network doesn't exist
  • webgui: network refinements
  • webgui: docker: support special characters in webGUI, Support and Project Context menus
  • webgui: Add controls to enable/disable and specify custom ports for TELNET and SSH
  • webgui: Permit up to 4 NTP servers to be configured.
  • webgui: Add "Downgrade to previous version" selection
  • webgui: Add "Start Page" selection

Share this post


Link to post

Man, you guys are really pumping out the RCs this week.

 

I remember during the 6.4 cycle you mentioned that you were laying the groundwork for some of the features in 6.5 and later.

Care to drop any hints? :)

Share this post


Link to post

I think this version (v6.5.0) is very much geared towards mitigating spectre and meltdown at the moment.

Share this post


Link to post

Updated not too long ago. After reboot, noticed I cannot access my server shares via my windows 10 machines. Can reach webui, but it doesnt fully load the "Main" tab past unassigned devices. (no stop, restart, shutdown buttons). Log doesnt show anything from the webui link. Diags won't download. Tried chrome, edge and safari. VM and dockers tab wont load.

 

Not sure what I can provide to try and diagnose from here... Dockers and VM's are working. I do have terminal access via putty.

Edited by NotYetRated

Share this post


Link to post
1 minute ago, NotYetRated said:

Not sure what I can provide to try and diagnose from here... Dockers and VM's are working.

 

See if you can SSH  in and enter the   diagnostics    on the command line.  That will write the diagnostics file to the logs directory/folder on the flash drive.     

Share this post


Link to post
4 minutes ago, Frank1940 said:

 

See if you can SSH  in and enter the   diagnostics    on the command line.  That will write the diagnostics file to the logs directory/folder on the flash drive.     

 

Doh, thanks. Attempted the command and its just been sitting at "Starting Diagnostics Collection". Will give it a bit but may need to force an unclean shutdown. 

Share this post


Link to post
10 minutes ago, NotYetRated said:

 

Doh, thanks. Attempted the command and its just been sitting at "Starting Diagnostics Collection". Will give it a bit but may need to force an unclean shutdown. 

 

At least type this to capture the system log and save it on the flash:

 

cp /var/log/syslog /boot/syslog.txt

That will create the file 'syslog.txt' in the root of your flash device where you can get at it following reboot, or plug into a PC.

Share this post


Link to post
19 minutes ago, limetech said:

 

At least type this to capture the system log and save it on the flash:

 


cp /var/log/syslog /boot/syslog.txt

That will create the file 'syslog.txt' in the root of your flash device where you can get at it following reboot, or plug into a PC.

 

I will note this for next time.... My terminal session was hung up on "Starting Diagnostics Collection" and I could not get another session to connect to run your command, nor could I exit the diagnostics collection message...

Share this post


Link to post

Shortly after a fresh reboot, docker and dashboard tabs not loading.

 

Diags attached. What looks like an associated log entry below.

 

Mar 3 18:10:14 BigBang nginx: 2018/03/03 18:10:14 [error] 9037#9037: *1719 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.0.61, server: , request: "GET /Docker HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.20", referrer: "http://192.168.0.20/VMs"
Mar 3 18:11:18 BigBang nginx: 2018/03/03 18:11:18 [error] 9037#9037: *1808 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.0.61, server: , request: "GET /Docker HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "bigbang", referrer: "http://bigbang/Main"
Mar 3 18:12:23 BigBang nginx: 2018/03/03 18:12:23 [error] 9037#9037: *1843 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.0.61, server: , request: "GET /Docker HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.20", referrer: "http://192.168.0.20/Plugins"
Mar 3 18:12:25 BigBang nginx: 2018/03/03 18:12:25 [error] 9037#9037: *1846 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.0.61, server: , request: "GET /Dashboard HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.20", referrer: "http://192.168.0.20/Docker"

 

bigbang-diagnostics-20180303-1811.zip

Edited by NotYetRated

Share this post


Link to post

There's a bit of crowding on the Docker template with a long name:

5a9bdd2b7e757_DockerTemplate.png.9bdcffa14815b8f1c2bf7ed91823eda8.png

Share this post


Link to post
1 hour ago, dlandon said:

There's a bit of crowding on the Docker template with a long name:

5a9bdd2b7e757_DockerTemplate.png.9bdcffa14815b8f1c2bf7ed91823eda8.png

I always disliked how the container name would wrap on the Dashboard so I just use shorter names. PlexMS, LogitechMS, etc.

Share this post


Link to post
18 hours ago, trurl said:

I always disliked how the container name would wrap on the Dashboard so I just use shorter names. PlexMS, LogitechMS, etc.

 

You can rename them when you are creating them or once installed you can edit it to use that name....I have renamed my Plex based off my server name: MikeFlix this is ony my one Unraid using 6.4.1 but works on at least 6.3.5 (thats when i renamed it)


it sticks until you remove the container and add it back or until you change it again...mines been this way since 6.3.5 and i use Plex beta updates so its been updating more than a few times..

 

 

Screen Shot 2018-03-05 at 12.52.45 AM.png

Share this post


Link to post
Guest
This topic is now closed to further replies.